
Disclaimer
How to change serpentine belt on NISSAN PRIMERA Hatchback (P12) – replacement guide
downloads:
4
Views:
77

Recommended replacement interval for the part category Serpentine belt : 15000 km
Important!
This replacement procedure can be used for:
NISSAN PRIMERA Hatchback (P12) 2.0 … View more
The steps may slightly vary depending on the car design.
NISSAN PRIMERA Hatchback (P12) 2.0 … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Poly V-Belt for PRIMERA Hatchback (P12) and other NISSAN models
Serpentine belt
Alternative products

Torque wrench
Combination spanner #14
Combination spanner #19
Wheel impact socket #21
Ratchet wrench
Wheel chock
Replacement: serpentine belt – NISSAN PRIMERA Hatchback (P12). Tip from AUTODOC experts:
- All work should be done with the engine stopped.
Replacement: serpentine belt – NISSAN PRIMERA Hatchback (P12). Recommended sequence of steps:
- Step 1Secure the wheels with chocks.Step 2Loosen the wheel mounting bolts. Use wheel impact socket #21.
- Step 3Raise the car.Replacement: serpentine belt – NISSAN PRIMERA Hatchback (P12). Professionals recommend:If you are using a jack, make sure it rests on a flat surface without any unevenness.Be sure to additionally secure the car with jack stands.Step 4Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. NISSAN PRIMERA Hatchback (P12)
- Step 5Remove the wheel.
- Step 6Unscrew and detach the engine side cover fasteners.Step 7Remove the engine cover.Step 8Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #14.
- Step 9Remove the V-ribbed belt.Replacement: serpentine belt – NISSAN PRIMERA Hatchback (P12). AUTODOC experts recommend:Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.
- Step 10Return the tensioner pulley to its initial position.
- Step 11Install the V-ribbed belt.
- Step 12Pull aside the V-ribbed belt tensioner pulley.
- Step 13Place the V-ribbed belt on the tensioner pulley.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the NISSAN Primera Hatchback (P12) model
Popular maintenance tutorials for Nissan Primera P12 Hatchback
Complete guides for changing the Alternator belt on different NISSAN PRIMERA models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your NISSAN PRIMERA Hatchback (P12)
View more
- Top Automatic Transmission Blunders You Must Dodge | AUTODOC Insights
- DIY rear axle restoration | Drivetrain restoration – Part 2
- Understanding Airbag Light Warnings | Essential Tips for Car Safety
- 5 more brake repair mistakes | Stop making these brake repair mistakes
Most commonly replaced car parts on NISSAN PRIMERA
Time to replace parts? Get even better deals in our Shop app.

SCAN ME