
Disclaimer
How to change serpentine belt on NISSAN NV200 Box Body / Estate – replacement guide
downloads:
4
Views:
68

Recommended replacement interval for the part category Serpentine belt : 6 year / 150000 km
Important!
This replacement procedure can be used for:
NISSAN NV200 Box Body / Estate 1.5 dCi 110 (M20, M20M), NISSAN NV200 Box Body / Estate 1.5 dCi 90 (M20, M20M) … View more
The steps may slightly vary depending on the car design.
NISSAN NV200 Box Body / Estate 1.5 dCi 110 (M20, M20M), NISSAN NV200 Box Body / Estate 1.5 dCi 90 (M20, M20M) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Poly V-Belt for NV200 Box Body / Estate and other NISSAN models
Serpentine belt
Alternative products

Torque wrench
Combination spanner #10
Combination spanner #16
Drive socket # 13
Wheel impact socket #17
Ratchet wrench
Clip removal tool
Fender cover
Wheel chock
Replacement: serpentine belt – NISSAN NV200 Box. AUTODOC recommends:
- All work should be done with the engine stopped.
Replacement: serpentine belt – NISSAN NV200 Box. Use the following procedure:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3Secure the wheels with chocks.
- Step 4Loosen the wheel mounting bolts. Use wheel impact socket #17.
- Step 5Raise the front of the car and secure on supports.Step 6Unscrew the wheel bolts.AUTODOC recommends:Important! Hold the wheel while unscrewing the fastening bolts. NISSAN NV200 Box
- Step 7Remove the wheel.
- Step 8Remove the wheel arch cover. Use a clip removal tool.
- Step 9Unscrew the fuel filter bracket fixing bolts. Use a drive socket #13. Use a ratchet wrench.
- Step 10Remove the fuel filter fastening bracket.
- Step 11Unscrew the fuel filter bracket fixing bolts. Use a combination spanner #10.
- Step 12Remove the fuel filter fastening bracket.
- Step 13Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #16.
- Step 14Remove the V-ribbed belt.
- Step 15Return the tensioner pulley to its initial position.Replacement: serpentine belt – NISSAN NV200 Box. Tip:Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.Step 16Install the V-ribbed belt.AUTODOC recommends:Make sure that the V-ribbed belt fits all pulleys snugly.
- Step 17Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #16.
- Step 18Place the V-ribbed belt on the tensioner pulley.
- Step 19Return the tensioner pulley to its initial position.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the NISSAN NV200 Box Body / Estate (M20) model
Popular maintenance tutorials for Nissan NV200 Box Body
Complete guides for changing the Alternator belt on different NISSAN NV200 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your NISSAN NV200 Box Body / Estate
View more
- Extend your engine's life: Avoid these 3 damaging factors | AUTODOC tips
- Save Money on Fuel with These Easy Tips | AUTODOC
- How to Polish Your Car Yourself and Save Money on Garage Services | AUTODOC tips
- Transform Your Car's Look: 6 Simple Accessories You Need to Try!
Most commonly replaced car parts on NISSAN NV200
Time to replace parts? Get even better deals in our Shop app.

SCAN ME