Disclaimer
How to change serpentine belt on MERCEDES-BENZ Viano (W639) – replacement guide
downloads:
36
Views:
705
Recommended replacement interval for the part category Serpentine belt : 30000 km
Important!
This replacement procedure can be used for:
MERCEDES-BENZ VIANO (W639) CDI 2.0 (639.711, 639.713, 639.811, 639.813, 639.815), MERCEDES-BENZ VIANO (W639) CDI 2.2 4-matic (639.711, 639.713, 639.811, 639.813,..., MERCEDES-BENZ VIANO (W639) CDI 2.0 (639.711, 639.713, 639.811, 639.813, 639.815), MERCEDES-BENZ VIANO (W639) CDI 2.2 (639.711, 639.713, 639.811, 639.813, 639.815) … View more
The steps may slightly vary depending on the car design.
MERCEDES-BENZ VIANO (W639) CDI 2.0 (639.711, 639.713, 639.811, 639.813, 639.815), MERCEDES-BENZ VIANO (W639) CDI 2.2 4-matic (639.711, 639.713, 639.811, 639.813,..., MERCEDES-BENZ VIANO (W639) CDI 2.0 (639.711, 639.713, 639.811, 639.813, 639.815), MERCEDES-BENZ VIANO (W639) CDI 2.2 (639.711, 639.713, 639.811, 639.813, 639.815) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Poly V-Belt for VIANO (W639) and other MERCEDES-BENZ models
Alternative products

12-point socket # 17
Ratchet wrench
Fender cover
Wheel chock
Replacement: serpentine belt – MERCEDES-BENZ VIANO (W639). AUTODOC recommends:
- All work should be done with the engine stopped.
Replacement: serpentine belt – MERCEDES-BENZ VIANO (W639). Use the following procedure:
- Step 1Open the bonnet.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3Secure the wheels with chocks.Step 4Lift the car using a jack or place it over an inspection pit.Step 5
Pull aside the V-ribbed belt tensioner pulley. Use 12-point socket No.17. Use a ratchet wrench. - Step 6
Remove the V-ribbed belt.Replacement: serpentine belt – MERCEDES-BENZ VIANO (W639). AUTODOC experts recommend:Check the condition of the tensioner pulley and idler pulley. Replace them if necessary. - Step 7Return the tensioner pulley to its initial position. Use 12-point socket No.17. Use a ratchet wrench.Step 8Pull aside the V-ribbed belt tensioner pulley. Use 12-point socket No.17. Use a ratchet wrench.Step 9
Install the V-ribbed belt.Replacement: serpentine belt – MERCEDES-BENZ VIANO (W639). Tip from AUTODOC:Make sure that the V-ribbed belt fits all pulleys snugly.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the MERCEDES-BENZ Viano (W639) model
Popular maintenance tutorials for Mercedes Viano W639
Complete guides for changing the Alternator belt on different MERCEDES-BENZ VIANO models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your MERCEDES-BENZ VIANO (W639)
View more
#DIY guide: Changing your car's color with a spray can | AUTODOC tips
Preventing Engine Failure: Head Gasket Inspection Tutorial | AUTODOC
2 ways to clean the EGR valve – which one is better?
How to prevent car windows from fogging up | AUTODOC tips
Most commonly replaced car parts on MERCEDES-BENZ VIANO
Time to replace parts? Get even better deals in our Shop app.

SCAN ME





















