Disclaimer
How to change serpentine belt on DACIA LOGAN Pickup (US_) – replacement guide
downloads:
4
Views:
111
Recommended replacement interval for the part category Serpentine belt : 4 year / 90000 km
Important!
This replacement procedure can be used for:
DACIA LOGAN Pickup (US_) 1.6 … View more
The steps may slightly vary depending on the car design.
DACIA LOGAN Pickup (US_) 1.6 … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Poly V-Belt for LOGAN Pickup (US_) and other DACIA models
Alternative products

Torque wrench
Combination spanner #13
Drive socket # 18
Wheel impact socket #19
Ratchet wrench
Phillips Screwdriver
Fender cover
Wheel chock
AUTODOC recommends:
- Please note: all work on the car – DACIA LOGAN Pickup (US_) – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1Open the bonnet.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3
Secure the wheels with chocks. Loosen the wheel mounting bolts. Use wheel impact socket #19. - Step 4Raise the car.Replacement: serpentine belt – DACIA LOGAN Pickup (US_). Tip from AUTODOC:If you are using a jack, make sure it rests on a flat surface without any unevenness.Be sure to additionally secure the car with jack stands.Step 5
Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. DACIA LOGAN Pickup (US_) - Step 6
Remove the wheel. - Step 7
Unscrew and remove the wheel arch cover fasteners. Use a Phillips screwdriver. - Step 8
Remove the wheel arch cover. - Step 9
Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #13. - Step 10
Remove the V-ribbed belt.Replacement: serpentine belt – DACIA LOGAN Pickup (US_). Professionals recommend:Check the condition of the tensioner pulley and idler pulley. Replace them if necessary. - Step 11
Install the V-ribbed belt.AUTODOC recommends:Make sure that the V-ribbed belt fits all pulleys snugly. - Step 12
Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #13. - Step 13
Place the V-ribbed belt on the tensioner pulley. Return the tensioner pulley to its initial position. - Step 14
Rotate the crankshaft several times to check whether the new V-ribbed belt is working correctly. Use a drive socket #18. Use a ratchet wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the DACIA Logan I Pickup (US) model
Popular maintenance tutorials for Dacia Logan US
Complete guides for changing the Alternator belt on different DACIA LOGAN models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your DACIA LOGAN Pickup (US_)
View more
DIY brake caliper restoration | AUTODOC tips
Easy Steps to Paint Brake Calipers Without Special Skills or High Costs
How to tell if a tie rod is faulty
How to unlock your car without a key | AUTODOC tips
Most commonly replaced car parts on DACIA LOGAN
Time to replace parts? Get even better deals in our Shop app.

SCAN ME
















