How to carry out replacement: Poly V-Belt 1.5 dCi Dacia Logan MCV KS
Disclaimer
Change Dacia Logan MCV KS 1.6 (KS0B, KS0D, KS0F) Poly V-Belt yourself – manuals and video tutorials

How to change serpentine belt on DACIA LOGAN MCV (KS_) – replacement guide

downloads: 31
Views: 316
Download your free tutorial and fix DACIA LOGAN MCV (KS_) 1.5 dCi problems yourself Download for free 1.15 MB Poly V-Belt for Dacia Logan MCV KS Shop now
Leave a comment Open in a new tab
When to replace the Poly V-Belt on your DACIA LOGAN
Recommended replacement interval for the part category Serpentine belt : 4 year / 90000 km
Important!
This replacement procedure can be used for:
DACIA LOGAN MCV (KS_) 1.6 Bifuel, DACIA LOGAN MCV (KS_) 1.6 (KS0B, KS0D, KS0F), DACIA LOGAN MCV (KS_) 1.4 … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Poly V-Belt for LOGAN MCV (KS_) and other DACIA models
Alternative products
How to change Serpentine belt on Dacia Logan MCV KS 1.5 dCi – step-by-step instructions for straightforward car repair Serpentine belt
Tools
Replacement: serpentine belt – DACIA LOGAN MCV (KS_). Tools you need:
Torque wrench
Combination spanner #13
Drive socket # 18
Wheel impact socket #19
Ratchet wrench
Phillips Screwdriver
Fender cover
Wheel chock
Buy tools
AUTODOC recommends:
  • Please note: all work on the car – DACIA LOGAN MCV (KS_) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Poly V-Belt on Dacia Logan MCV KS 2007 - free PDF and video manuals
    Secure the wheels with chocks. Loosen the wheel mounting bolts. Use wheel impact socket #19.
  2. Step 4
    Raise the car.
    Replacement: serpentine belt – DACIA LOGAN MCV (KS_). Tip from AUTODOC:
    If you are using a jack, make sure it rests on a flat surface without any unevenness.Be sure to additionally secure the car with jack stands.
    Step 5
    How to replace DACIA LOGAN MCV (KS_) 1.5 dCi 2008 Poly V-Belt - step-by-step manuals and video guides
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. DACIA LOGAN MCV (KS_)
  3. Step 6
    Dacia Logan MCV KS 1.6 (KS0B, KS0D, KS0F) 2009 Poly V-Belt replacement: free workshop manuals
    Remove the wheel.
  4. Step 7
    Changing Poly V-Belt on DACIA LOGAN MCV (KS_) 1.4 2010 by yourself
    Unscrew and remove the wheel arch cover fasteners. Use a Phillips screwdriver.
  5. Step 8
    How to remove DACIA LOGAN 1.6 16V Hi-Flex 2011 Poly V-Belt - online easy-to-follow instructions
    Remove the wheel arch cover.
  6. Step 9
    How to replace Poly V-Belt on DACIA LOGAN MCV (KS_) 2012: download PDF manuals and video instructions
    Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #13.
  7. Step 10
    How hard is it to do yourself: Poly V-Belt replacement on Dacia Logan MCV KS 1.6 Bifuel 2013 - download illustrated guide
    Remove the V-ribbed belt.
    Replacement: serpentine belt – DACIA LOGAN MCV (KS_). Professionals recommend:
    Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.
  8. Step 11
    Need to know how to renew Poly V-Belt on DACIA LOGAN 2014? This free workshop manual will help you to do it yourself
    Install the V-ribbed belt.
    AUTODOC recommends:
    Make sure that the V-ribbed belt fits all pulleys snugly.
  9. Step 12
    Changing of Poly V-Belt on Dacia Logan MCV KS 2015 won't be an issue if you follow this illustrated step-by-step guide
    Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #13.
  10. Step 13
    DACIA LOGAN 1.6 (KS0B, KS0D, KS0F) Poly V-Belt replacement: online guides and video tutorials
    Place the V-ribbed belt on the tensioner pulley. Return the tensioner pulley to its initial position.
  11. Step 14
    Replacing Poly V-Belt on Dacia Logan MCV KS 2017 1.5 dCi by yourself
    Rotate the crankshaft several times to check whether the new V-ribbed belt is working correctly. Use a drive socket #18. Use a ratchet wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the DACIA Logan I MCV (KS) model

Dacia Logan MCV KS tyre size

Popular maintenance tutorials for Dacia Logan MCV KS

More manuals for Dacia Logan MCV KS

Complete guides for changing the Alternator belt on different DACIA LOGAN models

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY DACIA LOGAN MCV (KS_) Poly V-Belt replacement - online guide
Tips & tricks for your DACIA LOGAN MCV (KS_)
View more
  • How to change Alternator belt on DACIA LOGAN MCV (KS_) 1.6 16V (KS0L, KS0M, KS0P, KS1S) - replacement tricks
    #DIY Guide: How to Fix a Cracked Windscreen Without a Garage Visit
    9K views
    Published on: 14/12/2023
  • Changing Auxiliary belt Dacia Logan MCV KS 1.5 dCi - Replacement Tips
    Easy Steps to Paint Brake Calipers Without Special Skills or High Costs
    10K views
    Published on: 08/04/2021
  • Maintenance Hacks - DACIA LOGAN MCV (KS_) 1.6 (KS0B, KS0D, KS0F) Poly V-belt replacement guide
    5 causes of turbocharger failure and how to avoid them
    15K views
    Published on: 04/04/2024
  • Replace Drive belt on Dacia Logan MCV KS - free video tips
    DIY car soundproofing | AUTODOC tips
    107K views
    Published on: 15/04/2021

Most commonly replaced car parts on DACIA LOGAN

Professional manuals for the most common DACIA models

ОЕ number
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
DACIA LOGAN MCV (KS_) Poly V-Belt replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME