Disclaimer
How to change spark plugs on DACIA LOGAN Pickup (US_) – replacement guide
downloads:
1
Views:
7
Recommended replacement interval for the part category Spark plug : 30000 km
Important!
This replacement procedure can be used for:
DACIA LOGAN Pickup (US_) 1.6, DACIA LOGAN Pickup (US_) 1.6 Bifuel, DACIA LOGAN Pickup (US_) 1.6 MPI 85 … View more
The steps may slightly vary depending on the car design.
DACIA LOGAN Pickup (US_) 1.6, DACIA LOGAN Pickup (US_) 1.6 Bifuel, DACIA LOGAN Pickup (US_) 1.6 MPI 85 … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Spark Plug for LOGAN Pickup (US_) and other DACIA models
Spark plug
Alternative products
Spark plug
High-temperature anti-seize lubricant
Spark plug socket # 16
Round-nose pliers
Torque wrench
Fender cover
Replacement: spark plugs – DACIA LOGAN Pickup (US_). Professionals recommend:
- The replacement procedure is the same for all spark plugs.
- Warning! Shut down the engine before starting any work – DACIA LOGAN Pickup (US_)
Carry out replacement in the following order:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3
Remove the engine cover. - Step 4
Remove the spark plug wire connectors from the spark plug wells. Use round-nose pliers.Replacement: spark plugs – DACIA LOGAN Pickup (US_). Tip from AUTODOC:Be careful to avoid damaging spark plug wires.Remember the sequence of the spark plug wires connectors. - Step 5
Clean dirt, dust and debris from inside the spark plug wells. - Step 6
Unscrew the spark plugs. Use the spark plug socket #16. - Step 7
Take out the spark plugs. Use the spark plug socket #16. - Step 8
Apply a thin layer of a special high temperature anti-seize lubricant to the threads of the new spark plugs. - Step 9Install the new spark plugs into their mounting seats. Use the spark plug socket #16.Step 10
Screw new spark plugs and tighten them. Use the spark plug socket #16. Use a torque wrench. Tighten it to 25 nm torque.Replacement: spark plugs – DACIA LOGAN Pickup (US_). AUTODOC experts recommend:Don't tighten the plugs with excessive force. Exceeding tightening torque can damage the thread connection. Be careful when working with a spark plug wrench. Its skewing can cause damage to the threaded connection.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the DACIA Logan I Pickup (US) model
Popular maintenance tutorials for Dacia Logan US
Free download PDF
1.55 MB
Free download PDF1.13 MB
Free download PDF1.49 MB
Free download PDF2.02 MB
Free download PDF1.44 MB
Free download PDF3.41 MB
Complete guides for changing the Engine spark plug on different DACIA LOGAN models
Free download PDF880.64 KB
Free download PDF1.1 MB
Free download PDF1.1 MB
Free download PDF1.24 MB
Free download PDF890.88 KB
Free download PDF1.74 MB
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your DACIA LOGAN Pickup (US_)
View more
The most common problems when buying a used car | AUTODOC
TOP 5 mistakes during DIY oil change | AUTODOC tips
How to Swap an M50 Engine in a BMW E30 Turbo | AUTODOC Project
5 most common causes of oil leaks | AUTODOC tips
Most commonly replaced car parts on DACIA LOGAN
Time to replace parts? Get even better deals in our Shop app.
SCAN ME