Recommended replacement interval for the part category Serpentine belt : 6 year / 120000 km

Important!

This replacement procedure can be used for:
DACIA LOGAN MCV II 1.6 … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Poly V-Belt for LOGAN MCV II and other DACIA models

Serpentine belt

Serpentine belt for Logan II MCV (L8) Petrol (84 hp)

Replacement: serpentine belt – DACIA LOGAN MCV II. Tools you need:

                        Torque wrench
                      
                        Combination spanner #10
                      
                        Combination spanner #16
                      
                        Drive socket # 13 
                      
                        Wheel impact socket #17
                      
                        Ratchet wrench
                      
                        Clip removal tool
                      
                        Fender cover
                      
                        Wheel chock

Buy tools

Replacement: serpentine belt – DACIA LOGAN MCV II. AUTODOC recommends:

All work should be done with the engine stopped.

Replacement: serpentine belt – DACIA LOGAN MCV II. Use the following procedure:

Step 1

Open the hood.

Step 2

Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.

Step 3

Secure the wheels with chocks.
Step 4

Loosen the wheel mounting bolts. Use wheel impact socket #17.
Step 5

Raise the front of the car and secure on supports.

Step 6

Unscrew the wheel bolts.

AUTODOC recommends:
Important! Hold the wheel while unscrewing the fastening bolts. DACIA LOGAN MCV II
Step 7

Remove the wheel.
Step 8

Remove the wheel arch cover. Use a clip removal tool.
Step 9

Unscrew the fuel filter bracket fixing bolts. Use a drive socket #13. Use a ratchet wrench.
Step 10

Remove the fuel filter fastening bracket.
Step 11

Unscrew the fuel filter bracket fixing bolts. Use a combination spanner #10.
Step 12

Remove the fuel filter fastening bracket.
Step 13

Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #16.
Step 14

Remove the V-ribbed belt.
Step 15

Return the tensioner pulley to its initial position.

Replacement: serpentine belt – DACIA LOGAN MCV II. Tip:
Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.
Step 16

Install the V-ribbed belt.

AUTODOC recommends:
Make sure that the V-ribbed belt fits all pulleys snugly.
Step 17

Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #16.
Step 18

Place the V-ribbed belt on the tensioner pulley.
Step 19

Return the tensioner pulley to its initial position.
Step 20

Install the fuel filter fastening bracket.
Step 21

Screw the fixing bolts of the fuel filter bracket. Use a combination spanner #10.
Step 22

Install the fuel filter fastening bracket.
Step 23

Screw the fixing bolts of the fuel filter bracket. Use a drive socket #13. Use a ratchet wrench.
Step 24

Install the wheel arch cover to its mounting seat.
Step 25

Install the wheel.

Replacement: serpentine belt – DACIA LOGAN MCV II. Tip from AUTODOC:
To avoid injury, hold up the wheel when screwing in the fastening bolts.
Step 26

Screw in the wheel bolts. Use wheel impact socket #17.
Step 27

Lower the car and working in a cross order, tighten the wheel bolts. Use wheel impact socket #17. Use a torque wrench. Tighten it to 105 nm torque.
Step 28

Remove the jacks and chocks.

Step 29

Run the engine for a few minutes. This is necessary in order to make sure that the component operates properly.

Step 30

Shut off the engine.

Step 31

Remove the fender protection cover.

Step 32

Close the hood.

Was this manual helpful?

Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.

Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the DACIA Logan II MCV (L8) model.

Dacia Logan MCV 2 tyre size

How to change spark plugs on DACIA LOGAN MCV II – replacement guide

Free download PDF
880.64 KB
How to change glow plugs on DACIA LOGAN MCV II – replacement guide

Free download PDF
1.55 MB
How to change front brake discs on DACIA LOGAN MCV II – replacement guide

Free download PDF
1.94 MB
How to change front wheel bearing on DACIA LOGAN MCV II – replacement guide

Free download PDF
3.39 MB
How to change engine oil and filter on DACIA LOGAN MCV II – replacement guide

Free download PDF
1.17 MB
How to change fuel filter on DACIA LOGAN MCV II – replacement guide

Free download PDF
962.56 KB

How to change serpentine belt on DACIA LOGAN MCV (KS_) – replacement guide

Free download PDF
1.15 MB
How to change serpentine belt on DACIA LOGAN (LS_) – replacement guide

Free download PDF
1.13 MB
How to change serpentine belt on DACIA LOGAN EXPRESS (FS_) – replacement guide

Free download PDF
1.13 MB
How to change serpentine belt on DACIA LOGAN Pickup (US_) – replacement guide

Free download PDF
1.13 MB
How to change serpentine belt on a car – replacement tutorial

Universal

Free download PDF
1.51 MB
How to change serpentine belt on DACIA SANDERO II – replacement guide

Free download PDF
1.62 MB

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!

Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.

Scan

To download the app:

- scan the QR code
- download from App Store
- download from Google Play

What to do if the airbag light is on | AUTODOC tips

5K views

Published on: 10/04/2023
Car checks you need to carry out on your car after the winter | AUTODOC tips

3K views

Published on: 23/03/2023
5 car tips for a winter's day | AUTODOC tips

5K views

Published on: 05/02/2024
3 things to know before buying summer tyres | AUTODOC tips

3K views

Published on: 18/05/2023