When to replace the Poly V-Belt on your CITROËN RELAY
Recommended replacement interval for the part category Serpentine belt : 30000 km
Important!
This replacement procedure can be used for:
CITROËN JUMPER Box (244) 2.2 HDi, CITROËN JUMPER Box (244) 2.0 HDi View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Poly V-Belt for JUMPER Box (244) and other CITROËN models
Alternative products
How to change Serpentine belt on CITROËN JUMPER Box (244) 2.0 HDi – step-by-step instructions for straightforward car repair Serpentine belt
Tools
Replacement: serpentine belt – CITROËN JUMPER Box (244). Tools you'll need:
Combination spanner #16
Fender cover
Replacement: serpentine belt – CITROËN JUMPER Box (244). Professionals recommend:
  • All work should be done with the engine stopped.
Replacement: serpentine belt – CITROËN JUMPER Box (244). Take the following steps:
  1. Step 1
    Open the hood.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    Lift the car using a jack or place it over an inspection pit.
    Step 4
    How to change Poly V-Belt on CITROËN JUMPER Box (244) 2002 - free PDF and video manuals
    Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #16.
  2. Step 5
    How to replace CITROËN JUMPER Box (244) 2.0 HDi 2003 Poly V-Belt - step-by-step manuals and video guides
    Remove the V-ribbed belt.
  3. Step 6
    CITROËN JUMPER Box (244) 2.2 HDi 2004 Poly V-Belt replacement: free workshop manuals
    Return the tensioner pulley to its initial position.
    Replacement: serpentine belt – CITROËN JUMPER Box (244). Tip from AUTODOC:
    Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.
  4. Step 7
    Install the V-ribbed belt.
    Replacement: serpentine belt – CITROËN JUMPER Box (244). AUTODOC recommends:
    Make sure that the V-ribbed belt fits all pulleys snugly.
    Step 8
    Changing Poly V-Belt on CITROËN JUMPER Box (244) 2.8 HDi 4x4 2005 by yourself
    Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #16.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the CITROËN Relay I Van (244) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY CITROËN JUMPER Box (244) Poly V-Belt replacement - online guide
Tips & tricks for your CITROËN JUMPER Box (244)
View more
  • How to change Alternator belt on CITROËN JUMPER Box (244) 2.8 HDi - replacement tricks
    Top 5 reasons why the suspension knocks | AUTODOC tips
  • Changing Auxiliary belt CITROËN JUMPER Box (244) 2.0 HDi - Replacement Tips
    5 mistakes made when washing the engine | AUTODOC tips
  • Maintenance Hacks - CITROËN JUMPER Box (244) 2.2 HDi Poly V-belt replacement guide
    5 possible reasons why your car heater isn't working
  • Replace Drive belt on CITROËN JUMPER Box (244) - free video tips
    5 mistakes when replacing consumables
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
CITROËN JUMPER Box (244) Poly V-Belt replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME