When to replace the Spark Plug on your CITROËN RELAY
Recommended replacement interval for the part category Spark plug : 60000 km
Important!
This replacement procedure can be used for:
CITROËN JUMPER Box (244) 2.0, CITROËN JUMPER Box (244) 2.0 bivalent View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Spark Plug for JUMPER Box (244) and other CITROËN models
Tools
Replacement: spark plugs – CITROËN JUMPER Box (244). Tools you need:
High-temperature anti-seize lubricant
Drive socket # 10
Spark plug socket # 16
Ratchet wrench
Torque wrench
Telescoping magnet
Fender cover
Replacement: spark plugs – CITROËN JUMPER Box (244). AUTODOC experts recommend:
  • The replacement procedure is the same for all spark plugs.
  • All work should be done with the engine stopped.
Replacement: spark plugs – CITROËN JUMPER Box (244). Recommended sequence of steps:
  1. Step 1
    Open the hood.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Spark Plug on CITROËN JUMPER Box (244) 2002 - free PDF and video manuals
    Detach the PCV valve.
  2. Step 4
    How to replace CITROËN JUMPER Box (244) 2.0 HDi 2003 Spark Plug - step-by-step manuals and video guides
    Disconnect the crankcase ventilation hose from the intake manifold.
  3. Step 5
    Remove the crankcase ventilation hoses.
    Step 6
    CITROËN JUMPER Box (244) 2.2 HDi 2004 Spark Plug replacement: free workshop manuals
    Disconnect the crankcase ventilation hose from the air duct.
  4. Step 7
    Changing Spark Plug on CITROËN JUMPER Box (244) 2.8 HDi 4x4 2005 by yourself
    Detach the throttle valve connectors.
  5. Step 8
    How to remove CITROËN RELAY 2.0 bivalent 2006 Spark Plug - online easy-to-follow instructions
    Detach the connector from the ignition coil.
  6. Step 9
    How to replace Spark Plug on CITROËN JUMPER Box (244) 2007: download PDF manuals and video instructions
    Detach the connector from the intake manifold.
  7. Step 10
    How hard is it to do yourself: Spark Plug replacement on CITROËN JUMPER Box (244) 2.0 2008 - download illustrated guide
    Cover the PCV valve hole with a microfibre cloth to prevent dirt and foreign objects from getting into the system.
  8. Step 11
    Need to know how to renew Spark Plug on CITROËN RELAY 2009? This free workshop manual will help you to do it yourself
    Unscrew the ignition coil bracket. Use a drive socket #10. Use a ratchet wrench.
  9. Step 12
    Changing of Spark Plug on CITROËN JUMPER Box (244) 2010 won't be an issue if you follow this illustrated step-by-step guide
    Pry up the ignition coil. Take out the ignition coil from the spark plug well.
  10. Step 13
    CITROËN RELAY 2.2 HDi Spark Plug replacement: online guides and video tutorials
    Clean dirt, dust and debris from inside the spark plug wells.
  11. Step 14
    Replacing Spark Plug on CITROËN JUMPER Box (244) 2012 2.0 HDi by yourself
    Unscrew the spark plugs. Use the spark plug socket #16. Use a ratchet wrench.
  12. Step 15
    JUMPER Box (244) 2.0 bivalent 2013 Spark Plug DIY replacement workshop manual
    Take out the spark plugs. Use a telescoping magnet.
  13. Step 16
    Apply a thin layer of a special high temperature anti-seize lubricant to the threads of the new spark plugs.
    Step 17
    How to change Spark Plug on CITROËN JUMPER Box (244) 2014 - tips and tricks
    Install the new spark plugs into their mounting seats. Use the spark plug socket #16.
  14. Step 18
    Step-by-step recommendations for DIY replacement CITROËN JUMPER Box (244) 2015 2.0 bivalent Spark Plug
    Screw new spark plugs and tighten them. Use the spark plug socket #16. Use a torque wrench. Tighten it to 28 nm torque.
    Replacement: spark plugs – CITROËN JUMPER Box (244). AUTODOC recommends:
    Don't tighten the plugs with excessive force. Exceeding tightening torque can damage the thread connection. Be careful when working with a spark plug wrench. Its skewing can cause damage to the threaded connection.
  15. Step 19
    DIY replacement of Spark Plug on CITROËN JUMPER Box (244) 2.8 HDi 2016 is not an issue anymore with our step-by-step tutorial
    Treat the ignition coil tips. Use high-temperature grease.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the CITROËN Relay I Van (244) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
CITROËN JUMPER Box (244) Spark Plug replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY CITROËN JUMPER Box (244) Spark Plug replacement - online guide
Tips & tricks for your CITROËN JUMPER Box (244)
View more
  • How to change Engine spark plug on CITROËN JUMPER Box (244) 2.8 HDi - replacement tricks
    Why do your brakes squeak? | AUTODOC tips
  • Changing Spark plug CITROËN JUMPER Box (244) 2.0 HDi - Replacement Tips
    How do EGR valves work? | AUTODOC
  • Maintenance Hacks - CITROËN JUMPER Box (244) 2.2 HDi Engine spark plugs replacement guide
    TOP 5 mistakes when replacing shock absorbers | AUTODOC tips
  • Replace Spark plug set on CITROËN JUMPER Box (244) - free video tips
    What to do if the airbag light is on | AUTODOC tips