When to replace the Poly V-Belt on your CITROËN RELAY
Recommended replacement interval for the part category Serpentine belt : 30000 km
Important!
This replacement procedure can be used for:
CITROËN JUMPER Platform/Chassis (230) 1.9 TD, CITROËN JUMPER Platform/Chassis (230) 1.9 TD View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Poly V-Belt for JUMPER Platform/Chassis (230) and other CITROËN models
How to change Serpentine belt on Citroen Jumper Platform 2.5 D – step-by-step instructions for straightforward car repair Serpentine belt
How to change V-Ribbed Belt Set on Citroen Jumper Platform 2.5 D – step-by-step instructions for straightforward car repair V-Ribbed Belt Set
Tools
Replacement: serpentine belt – CITROËN JUMPER Platform/Chassis (230). List of the tools you'll need:
Wire brush
Torque wrench
Drive socket # 27
HEX bit no.H8
1/4" square drive extension bar
Wheel impact socket #19
Ratchet wrench
Clip removal tool
Phillips screwdriver
Fender cover
Wheel chock
Replacement: serpentine belt – CITROËN JUMPER Platform/Chassis (230). Tools you might need:
  • All work should be done with the engine stopped.
Replacement: serpentine belt – CITROËN JUMPER Platform/Chassis (230). Use the following procedure:
  1. Step 1
    Open the hood.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    Secure the wheels with chocks.
    Step 4
    How to change Poly V-Belt on Citroen Jumper Platform 1994 - free PDF and video manuals
    Loosen the wheel mounting bolts. Use wheel impact socket #19.
  2. Step 5
    Raise the car.
    Replacement: serpentine belt – CITROËN JUMPER Platform/Chassis (230). AUTODOC recommends:
    If you are using a jack, make sure it rests on a flat surface without any unevenness.Be sure to additionally secure the car with jack stands.
    Step 6
    How to replace CITROËN JUMPER Platform/Chassis (230) 2.5 D 1995 Poly V-Belt - step-by-step manuals and video guides
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. CITROËN JUMPER Platform/Chassis (230)
  3. Step 7
    Citroen Jumper Platform 2.5 TDi 1996 Poly V-Belt replacement: free workshop manuals
    Remove the wheel.
  4. Step 8
    Changing Poly V-Belt on CITROËN JUMPER Platform/Chassis (230) 2.8 HDi 1997 by yourself
    Unscrew and remove the wheel arch cover fasteners. Use a clip removal tool. Use a Phillips screwdriver.
  5. Step 9
    How to remove CITROËN RELAY 2.0 1998 Poly V-Belt - online easy-to-follow instructions
    Remove the wheel arch cover.
  6. Step 10
    How to replace Poly V-Belt on CITROËN JUMPER Platform/Chassis (230) 1999: download PDF manuals and video instructions
    Release the coolant pipe fasteners.
  7. Step 11
    How hard is it to do yourself: Poly V-Belt replacement on Citroen Jumper Platform 2.8 D 2000 - download illustrated guide
    Clean the tensioner pulley fastener. Use a wire brush.
  8. Step 12
    Need to know how to renew Poly V-Belt on CITROËN RELAY 2001? This free workshop manual will help you to do it yourself
    Loosen the tensioner pulley fastener. Use HEX No.H8. Use a ratchet wrench.
  9. Step 13
    Changing of Poly V-Belt on Citroen Jumper Platform 2002 won't be an issue if you follow this illustrated step-by-step guide
    Pull aside the V-ribbed belt tensioner pulley. Use a 1/4" square drive extension bar. Use a ratchet wrench.
  10. Step 14
    CITROËN RELAY 2.5 D Poly V-Belt replacement: online guides and video tutorials
    Remove the V-ribbed belt.
    Replacement: serpentine belt – CITROËN JUMPER Platform/Chassis (230). Tip from AUTODOC experts:
    Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.
  11. Step 15
    Replacing Poly V-Belt on Citroen Jumper Platform 1995 2.5 D by yourself
    Install the V-ribbed belt.
    Replacement: serpentine belt – CITROËN JUMPER Platform/Chassis (230). Professionals recommend:
    Make sure that the V-ribbed belt fits all pulleys snugly.
  12. Step 16
    JUMPER Platform/Chassis (230) 2.0 1996 Poly V-Belt DIY replacement workshop manual
    Tension the belt by turning the tensioner pulley clockwise. Use a 1/4" square drive extension bar. Use a ratchet wrench.
    Replacement: serpentine belt – CITROËN JUMPER Platform/Chassis (230). Tip:
    Keep the belt taut until you've tightened the tensioner pulley fastener.
  13. Step 17
    How to change Poly V-Belt on CITROËN JUMPER Platform/Chassis (230) 1997 - tips and tricks
    Tighten the fastener of the serpentine belt tensioner pulley. Use HEX No.H8. Use a torque wrench. Tighten it to 35 Nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the CITROËN Relay I Platform / Chassis (230) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY CITROËN JUMPER Platform/Chassis (230) Poly V-Belt replacement - online guide
Tips & tricks for your CITROËN JUMPER Platform/Chassis (230)
View more
  • How to change Alternator belt on CITROËN JUMPER Platform/Chassis (230) 2.5 TD - replacement tricks
    5 tools that make car repair incredibly simple | AUTODOC tips
  • Changing Auxiliary belt Citroen Jumper Platform 2.5 D - Replacement Tips
    BMW E30 Turbo Suspension Swap: Boost Your Handling | AUTODOC project
  • Maintenance Hacks - CITROËN JUMPER Platform/Chassis (230) 2.5 TDi Poly V-belt replacement guide
    Drive with Care: 8 Common Bad Driving Habits Explained | AUTODOC
  • Replace Drive belt on Citroen Jumper Platform - free video tips
    #DIY Wheel Rim Restoration: Revive Scratches and Chips Easily!
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
CITROËN JUMPER Platform/Chassis (230) Poly V-Belt replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME