How to carry out replacement: Poly V-Belt 1.8i BMW Z3 Roadster
Disclaimer
Change BMW Z3 Roadster 1.9i Poly V-Belt yourself – manuals and video tutorials

How to change serpentine belt on BMW Z3 Roadster (E36) – replacement guide

downloads: 13
Views: 448
Download your free tutorial and fix BMW Z3 Roadster (E36) 1.8i problems yourself Download for free 1.31 MB Poly V-Belt for BMW Z3 Roadster Shop now
Leave a comment Open in a new tab
When to replace the Poly V-Belt on your BMW Z3
Recommended replacement interval for the part category Serpentine belt : 30000 km
Important!
This replacement procedure can be used for:
BMW Z3 Roadster (E36) 2.5i, BMW Z3 Roadster (E36) 2.2i, BMW Z3 Roadster (E36) 2.2i, BMW Z3 Roadster (E36) 3.0i … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Poly V-Belt for Z3 Roadster (E36) and other BMW models
Alternative products
How to change Serpentine belt on BMW Z3 Roadster 1.8i – step-by-step instructions for straightforward car repair Serpentine belt
250865 MAPCO Serpentine belt
3,80 GBP
Shop
SKPB-0090063 STARK Serpentine belt
4,89 GBP
Shop
SK-5PK880 STARK Serpentine belt
5,72 GBP
Shop
1 987 947 911 BOSCH Serpentine belt
6,92 GBP
Shop
SK-5PK865 STARK Serpentine belt
7,13 GBP
Shop
305P0026 RIDEX Serpentine belt
7,13 GBP
Shop
5PK862 DAYCO Serpentine belt
7,54 GBP
Shop
VKMV 5PK863 SKF Serpentine belt
8,07 GBP
Shop
5PK865 DAYCO Serpentine belt
8,32 GBP
Shop
VKMV 5PK864 SKF Serpentine belt
8,34 GBP
Shop
Tools
Replacement: serpentine belt – BMW Z3 (E36). Tools you'll need:
Combination spanner #13
Combination spanner #32
Drive socket # 16
Ratchet wrench
Torque wrench
Fender cover
Buy tools
Replacement: serpentine belt – BMW Z3 (E36). AUTODOC recommends:
  • All work should be done with the engine stopped.
Replacement: serpentine belt – BMW Z3 (E36). Use the following procedure:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Poly V-Belt on BMW Z3 Roadster 1995 - free PDF and video manuals
    Unscrew the fastener of the viscous fan clutch. Use a combination spanner #32.
  2. Step 4
    How to replace BMW Z3 Roadster (E36) 1.8i 1996 Poly V-Belt - step-by-step manuals and video guides
    Remove the fan shroud seal.
  3. Step 5
    BMW Z3 Roadster 1.9i 1997 Poly V-Belt replacement: free workshop manuals
    Unscrew and remove the viscous fan clutch.
  4. Step 6
    Changing Poly V-Belt on BMW Z3 Roadster (E36) 2.0i 1998 by yourself
    Remove the fan shroud.
  5. Step 7
    How to remove BMW Z3 3.0i 1999 Poly V-Belt - online easy-to-follow instructions
    Pull aside the AC compressor belt tensioner pulley. Use a combination spanner #13.
  6. Step 8
    How to replace Poly V-Belt on BMW Z3 Roadster (E36) 2000: download PDF manuals and video instructions
    Remove the AC compressor belt.
  7. Step 9
    How hard is it to do yourself: Poly V-Belt replacement on BMW Z3 Roadster M3.2 2001 - download illustrated guide
    Remove the tensioner pulley cap.
  8. Step 10
    Need to know how to renew Poly V-Belt on BMW Z3 2002? This free workshop manual will help you to do it yourself
    Pull aside the V-ribbed belt tensioner pulley. Use a drive socket #16. Use a ratchet wrench.
  9. Step 11
    Changing of Poly V-Belt on BMW Z3 Roadster 2003 won't be an issue if you follow this illustrated step-by-step guide
    Remove the V-ribbed belt.
  10. Step 12
    BMW Z3 1.9i Poly V-Belt replacement: online guides and video tutorials
    Return the tensioner pulley to its initial position. Use a drive socket #16. Use a ratchet wrench.
    Replacement: serpentine belt – BMW Z3 (E36). Professionals recommend:
    Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.
  11. Step 13
    Replacing Poly V-Belt on BMW Z3 Roadster 1996 1.8i by yourself
    Pull aside the V-ribbed belt tensioner pulley. Use a drive socket #16. Use a ratchet wrench.
  12. Step 14
    Z3 Roadster (E36) 3.0i 1997 Poly V-Belt DIY replacement workshop manual
    Install the V-ribbed belt.
    Replacement: serpentine belt – BMW Z3 (E36). Tip from AUTODOC:
    Make sure that the V-ribbed belt fits all pulleys snugly.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the BMW Z3 Roadster (E36) model

BMW Z3 Roadster tyre size

Popular maintenance tutorials for BMW Z3 Roadster

More manuals for BMW Z3 Roadster

Complete guides for changing the Alternator belt on different BMW Z3 models

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY BMW Z3 Roadster (E36) Poly V-Belt replacement - online guide
Tips & tricks for your BMW Z3 Roadster (E36)
View more
  • How to change Alternator belt on BMW Z3 Roadster (E36) 2.8i - replacement tricks
    Top 5 Mistakes to Avoid for Safe Engine Bay Repairs | AUTODOC Tips
    8K views
    Published on: 04/08/2023
  • Changing Auxiliary belt BMW Z3 Roadster 1.8i - Replacement Tips
    Transform Your Old Engine Valve Cover: Quick Polishing Tips for a Shiny Finish | AUTODOC Tips
    10K views
    Published on: 30/11/2023
  • Maintenance Hacks - BMW Z3 Roadster (E36) 1.9i Poly V-belt replacement guide
    Don’t Replace, Restore: Fixing Damaged Threads at Home
    7K views
    Published on: 04/05/2023
  • Replace Drive belt on BMW Z3 Roadster - free video tips
    Easy Steps to Paint Brake Calipers Without Special Skills or High Costs
    10K views
    Published on: 08/04/2021

Most commonly replaced car parts on BMW Z3

Professional manuals for the most common BMW models

Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
BMW Z3 Roadster (E36) Poly V-Belt replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME