Disclaimer
How to change serpentine belt on BMW Z3 Coupe (E36) – replacement guide
downloads:
0
Views:
68
Recommended replacement interval for the part category Serpentine belt : 30000 km
Important!
This replacement procedure can be used for:
BMW Z3 Coupe (E36) 3.0i … View more
The steps may slightly vary depending on the car design.
BMW Z3 Coupe (E36) 3.0i … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Poly V-Belt for Z3 Coupe (E36) and other BMW models
Alternative products

Combination spanner #13
Combination spanner #32
Drive socket # 16
Ratchet wrench
Torque wrench
Fender cover
Replacement: serpentine belt – BMW Z3 Coupe (E36). AUTODOC recommends:
- All work should be done with the engine stopped.
Replacement: serpentine belt – BMW Z3 Coupe (E36). Use the following procedure:
- Step 1Open the bonnet.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3
Unscrew the fastener of the viscous fan clutch. Use a combination spanner #32. - Step 4
Remove the fan shroud seal. - Step 5
Unscrew and remove the viscous fan clutch. - Step 6
Remove the fan shroud. - Step 7
Pull aside the AC compressor belt tensioner pulley. Use a combination spanner #13. - Step 8
Remove the AC compressor belt. - Step 9
Remove the tensioner pulley cap. - Step 10
Pull aside the V-ribbed belt tensioner pulley. Use a drive socket #16. Use a ratchet wrench. - Step 11
Remove the V-ribbed belt. - Step 12
Return the tensioner pulley to its initial position. Use a drive socket #16. Use a ratchet wrench.Replacement: serpentine belt – BMW Z3 Coupe (E36). Professionals recommend:Check the condition of the tensioner pulley and idler pulley. Replace them if necessary. - Step 13
Pull aside the V-ribbed belt tensioner pulley. Use a drive socket #16. Use a ratchet wrench. - Step 14
Install the V-ribbed belt.Replacement: serpentine belt – BMW Z3 Coupe (E36). Tip from AUTODOC:Make sure that the V-ribbed belt fits all pulleys snugly.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the BMW Z3 Coupe (E36) model
Popular maintenance tutorials for BMW Z3 Coupe
Complete guides for changing the Alternator belt on different BMW Z3 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your BMW Z3 Coupe (E36)
View more
5 signs of a faulty strut mount and how to fix it
Why Checking Your Oil is Crucial for Engine Performance
TOP 5 mistakes when replacing shock absorbers | AUTODOC tips
TOP 8 mistakes car owners make | AUTODOC tips
Most commonly replaced car parts on BMW Z3
Time to replace parts? Get even better deals in our Shop app.

SCAN ME




























