
How to change right engine mounts on VAUXHALL Vivaro Van (X83) – replacement guide
VAUXHALL Vivaro Van (X83) 2.0 CDTI, VAUXHALL Vivaro Van (X83) 2.0 CDTI, VAUXHALL Vivaro Van (X83) 2.5 CDTI, VAUXHALL Vivaro Van (X83) 2.5 DTI … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle

- All the work should be carried out with the ignition switched off.
- Step 1
Raise the vehicle or place it over an inspection pit.
Warning!If you are using a jack, make sure the car is parked on a hard, flat surface.Make sure to additionally secure the car with jack stands.
Step 2
Clean the engine mount fasteners. Use a wire brush. Use WD-40 spray.
- Step 3

Unscrew the fastener that connects the engine mount to the engine mount bracket. Use a 24 mm socket. Use a ratchet wrench.
- Step 4

Unscrew the fastener that connects the engine mount to the subframe. Use an 18 mm socket. Use a ratchet wrench.
- Step 5

Remove the fastening bolts.
- Step 6

Remove the engine mount.
Replacement: engine mounts – VAUXHALL VIVARO Box (F7). AUTODOC experts recommend:Carefully inspect the other engine mounts and replace them if necessary.
- Step 7

Clean the mounting seats of the engine mount. Use a wire brush. Use an all-purpose cleaning spray.
Find out which tyre and wheel sizes are compatible with the VAUXHALL Vivaro Van (X83) model
Popular maintenance tutorials for Vauxhall Vivaro Van
Complete guides for changing the Engine mounts on different VAUXHALL VIVARO models
Track expenses, manage logs, schedule replacements, and more.
Don’t Replace, Just Polish! Headlight Restoration with AUTODOC
How to identify a faulty CV joint
Why is the gearbox leaking? 5 main causes
DIY engine block coffee table
Most commonly replaced car parts on VAUXHALL VIVARO































