Important!
This replacement procedure can be used for:
VW Polo Classic (6V2) 75 1.6, VW Polo Classic (6V2) 60 1.4, VW Polo Classic (6V2) 64 1.9 SDI, VW Polo Classic (6V2) 100 1.6, VW Polo Classic (6V2) 90 1.9 TDI, VW Polo Classic (6V2) 57 1.7 SDI, VW Polo Classic (6V2) 110 1.9 TDI, VW Polo Classic (6V2) 75 1.4 16V, VW Polo Classic (6V2) 68 1.9 SDI, VW Polo Classic (6V2) 75 1.6, VW Polo Classic (6V2) 64 1,9 D, VW Polo Classic (6V2) 54 1.4 View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Wheel Bearing for Polo Classic (6V2) and other VW models
Alternative products
How to change Wheel bearing kit on VW Polo Classic 6kv 1.4 – step-by-step instructions for straightforward car repair Wheel bearing kit
Tools
Replacement: wheel bearing – VW POLO CLASSIC (6KV2). Tools you might need:
Wire brush
All-purpose cleaning spray
Multipurpose grease
Copper grease
Torque wrench
Combination spanner #10
Drive socket # 24
Wheel impact socket #17
Bush and bearing driver set
3-Arm Gear Puller
Ratchet wrench
Hammer
Crow bar
Wheel chock
AUTODOC recommends:
  • Do not re-use the bearing assembly of your VW POLO CLASSIC (6KV2) car.
  • The wheel hub bearing replacement procedure is identical for both wheels on the same axle.
  • Please note: all work on the car – VW POLO CLASSIC (6KV2) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    How to change Wheel Bearing on VW Polo Classic 6kv 1995 - free PDF and video manuals
    Engage the parking brake lever.
  2. Step 2
    How to replace VW Polo Classic (6V2) 1.4 1996 Wheel Bearing - step-by-step manuals and video guides
    Loosen the parking brake cable. Use a combination spanner #10.
  3. Step 3
    Secure the wheels with chocks.
    Step 4
    VW Polo Classic 6kv 1.6 1997 Wheel Bearing replacement: free workshop manuals
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  4. Step 5
    Raise the rear of the car and secure on supports.
    Step 6
    Changing Wheel Bearing on VW Polo Classic (6V2) 1.9 SDI 1998 by yourself
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. VW POLO CLASSIC (6KV2)
  5. Step 7
    How to remove VW POLO 1.9 TDI 1999 Wheel Bearing - online easy-to-follow instructions
    Remove the wheel.
  6. Step 8
    How to replace Wheel Bearing on VW Polo Classic (6V2) 2000: download PDF manuals and video instructions
    Clean the brake drum. Use a wire brush. Use all-purpose cleaning spray.
  7. Step 9
    How hard is it to do yourself: Wheel Bearing replacement on VW Polo Classic 6kv 1.6 2001 - download illustrated guide
    Remove the wheel hub nut cap. Use a crowbar. Use a hammer.
  8. Step 10
    Need to know how to renew Wheel Bearing on VW POLO 2002? This free workshop manual will help you to do it yourself
    Remove the cotter pin securing the hub nut. Use a crowbar. Use a hammer.
  9. Step 11
    Changing of Wheel Bearing on VW Polo Classic 6kv 2003 won't be an issue if you follow this illustrated step-by-step guide
    Unscrew the hub nut. Use a drive socket #24. Use a ratchet wrench.
  10. Step 12
    VW POLO 1.9 SDI Wheel Bearing replacement: online guides and video tutorials
    Remove the brake drum assembled with the wheel hub bearing.
    Replacement: wheel bearing – VW POLO CLASSIC (6KV2). Tip:
    Examine the brake drum. Replace it if necessary.
  11. Step 13
    Replacing Wheel Bearing on VW Polo Classic 6kv 2005 1.4 by yourself
    Clean the hub bearing mounting seat. Use all-purpose cleaning spray.
  12. Step 14
    Polo Classic (6V2) 1.9 TDI 2006 Wheel Bearing DIY replacement workshop manual
    Remove the hub bearing mounting. Use a crowbar.
  13. Step 15
    How to change Wheel Bearing on VW Polo Classic (6V2) 1995 - tips and tricks
    Remove the inner oil seal of the wheel bearing. Use a crowbar.
  14. Step 16
    Step-by-step recommendations for DIY replacement VW Polo Classic 6kv 1996 1.9 TDI Wheel Bearing
    Remove the hub bearing mounting. Use a crowbar.
  15. Step 17
    DIY replacement of Wheel Bearing on VW Polo Classic (6V2) 1.4 16V 1997 is not an issue anymore with our step-by-step tutorial
    Clean the hub bearing mounting seat.
  16. Step 18
    How to change Wheel Bearing on VW Polo Classic 6kv 1995 - free PDF and video manuals
    Remove the inner race of the wheel bearing from the brake drum. Use 3-Arm Gear Puller. Use a bush and bearing driver set.
  17. Step 19
    How to replace VW Polo Classic (6V2) 1.4 1996 Wheel Bearing - step-by-step manuals and video guides
    Remove the inner race of the wheel bearing from the brake drum. Use a bush and bearing driver set.
  18. Step 20
    VW Polo Classic 6kv 1.6 1997 Wheel Bearing replacement: free workshop manuals
    Install the new inner race of the wheel bearing into the brake drum. Use a bush and bearing driver set. Use a hammer.
  19. Step 21
    Changing Wheel Bearing on VW Polo Classic (6V2) 1.9 SDI 1998 by yourself
    Install the new inner race of the wheel bearing into the brake drum. Use a bush and bearing driver set. Use a hammer.
  20. Step 22
    How to remove VW POLO 1.9 TDI 1999 Wheel Bearing - online easy-to-follow instructions
    Treat the inner race and the wheel bearing. Use a multipurpose grease.
  21. Step 23
    How to replace Wheel Bearing on VW Polo Classic (6V2) 2000: download PDF manuals and video instructions
    Install a new hub bearing and secure it.
  22. Step 24
    How hard is it to do yourself: Wheel Bearing replacement on VW Polo Classic 6kv 1.6 2001 - download illustrated guide
    Press in the inner oil seal of the wheel bearing. Use a bush and bearing driver set. Use a hammer.
  23. Step 25
    Need to know how to renew Wheel Bearing on VW POLO 2002? This free workshop manual will help you to do it yourself
    Install a new hub bearing and secure it.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the VW Polo III Classic (6V2) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY VW Polo Classic (6V2) Wheel Bearing replacement - online guide
Tips & tricks for your VW Polo Classic (6V2)
View more
  • How to change Wheel bearings on VW Polo Classic (6V2) 1.4 16V - replacement tricks
    Understanding Car Tools: The Key Differences You Need to Know | AUTODOC tips
  • Changing Hub bearing VW Polo Classic 6kv 1.4 - Replacement Tips
    Don’t Replace, Restore: Fixing Damaged Threads at Home
  • Maintenance Hacks - VW Polo Classic (6V2) 1.6 Wheel bearing kit replacement guide
    CHECK ENGINE light turned on – step-by-step guide on what to do
  • Replace Wheel hub bearing on VW Polo Classic 6kv - free video tips
    How to Prevent Premature Wear on Your Car Boot Damper | AUTODOC
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
VW Polo Classic (6V2) Wheel Bearing replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME