Disclaimer
How to change rear wheel bearing on VW Golf IV Convertible (1E) – replacement guide
downloads:
4
Views:
107
Important!
This replacement procedure can be used for:
VW Golf IV Convertible (1E) 1.8, VW Golf IV Convertible (1E) 1.8, VW Golf IV Convertible (1E) 1.6, VW Golf IV Convertible (1E) 1.9 TDI, VW Golf IV Convertible (1E) 2.0, VW Golf IV Convertible (1E) 1.9 TDI … View more
The steps may slightly vary depending on the car design.
VW Golf IV Convertible (1E) 1.8, VW Golf IV Convertible (1E) 1.8, VW Golf IV Convertible (1E) 1.6, VW Golf IV Convertible (1E) 1.9 TDI, VW Golf IV Convertible (1E) 2.0, VW Golf IV Convertible (1E) 1.9 TDI … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Wheel Bearing for Golf IV Convertible (1E) and other VW models
Alternative products

Wire brush
All-purpose cleaning spray
Multipurpose grease
Copper grease
Torque wrench
Drive socket # 24
Wheel impact socket #17
Bush and bearing driver set
Pin punch
Tap wrench
Hammer
Rubber mallet
Flat Screwdriver
Crow bar
Wheel chock
Replacement: wheel bearing – VW GOLF Mk III Convertible (1E7). AUTODOC recommends:
- Do not re-use the bearing assembly of your VW GOLF Mk III Convertible (1E7) car.
- The wheel hub bearing replacement procedure is identical for both wheels on the same axle.
- All work should be done with the engine stopped.
Replacement: wheel bearing – VW GOLF Mk III Convertible (1E7). Recommended sequence of steps:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3Raise the rear of the car and secure on supports.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. VW GOLF Mk III Convertible (1E7) - Step 5
Remove the wheel. - Step 6
Remove the wheel hub nut cap. Use a crowbar. Use a hammer. - Step 7
Remove the cotter pin securing the hub nut. Use a crowbar. - Step 8
Unscrew the hub nut. Use a drive socket #24. Use a tap wrench. - Step 9
Remove the brake drum assembled with the wheel hub bearing. Use a flat screwdriver.Replacement: wheel bearing – VW GOLF Mk III Convertible (1E7). Tip:Examine the brake drum. Replace it if necessary. - Step 10
Remove the wheel hub bearing retaining ring. Use a crowbar. - Step 11
Remove the hub bearing mounting. Use a crowbar. - Step 12
Remove the inner race of the wheel bearing from the brake drum. Use a pin punch. Use a hammer. - Step 13
Install the new inner race of the wheel bearing into the brake drum. Use a bush and bearing driver set. Use a hammer. - Step 14
Treat the inner race and the wheel bearing. Use a multipurpose grease. - Step 15
Install a new hub bearing and secure it. - Step 16
Install the wheel hub bearing retaining ring. Use a bush and bearing driver set. Use a hammer. - Step 17
Clean the stub axle. Use all-purpose cleaning spray. Use WD-40 spray. - Step 18
Install the brake drum assembled with the wheel hub bearing. - Step 19
Apply special grease to the bearing assembly mounting seat. Use a multipurpose grease. - Step 20
Tighten the wheel hub nut. Use a drive socket #24. Use a ratchet wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the VW Golf IV Convertible (1E) model
Popular maintenance tutorials for Golf 4 Cabrio
Complete guides for changing the Wheel bearings on different VW GOLF models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your VW Golf IV Convertible (1E)
View more
5 Essential Tips to Prepare Your Car for Winter | AUTODOC tips
TOP 6 WD-40 lifehacks | AUTODOC tips
The most common problems when buying a used car | AUTODOC
Easy Steps to Paint Brake Calipers Without Special Skills or High Costs
Most commonly replaced car parts on VW GOLF
Time to replace parts? Get even better deals in our Shop app.

SCAN ME































