
Disclaimer
How to change rear wheel bearing on VW 1500/1600 Saloon (31) – replacement guide
downloads:
0
Views:
8
Important!
This replacement procedure can be used for:
VW 1500,1600 (31) 1.6, VW 1500,1600 (31) 1.6 TL … View more
The steps may slightly vary depending on the car design.
VW 1500,1600 (31) 1.6, VW 1500,1600 (31) 1.6 TL … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Wheel Bearing for 1500,1600 (31) and other VW models
Wheel bearing kit
Alternative products

Wire brush
All-purpose cleaning spray
Multipurpose grease
Copper grease
Torque wrench
Combination spanner #10
Drive socket # 24
Wheel impact socket #17
Bush and bearing driver set
3-Arm Gear Puller
Ratchet wrench
Hammer
Crow bar
Wheel chock
AUTODOC recommends:
- Do not re-use the bearing assembly of your VW 1500,1600 (31) car.
- The wheel hub bearing replacement procedure is identical for both wheels on the same axle.
- Please note: all work on the car – VW 1500,1600 (31) – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1Engage the parking brake lever.
- Step 2Loosen the parking brake cable. Use a combination spanner #10.
- Step 3Secure the wheels with chocks.Step 4Loosen the wheel mounting bolts. Use wheel impact socket #17.
- Step 5Raise the rear of the car and secure on supports.Step 6Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. VW 1500,1600 (31)
- Step 7Remove the wheel.
- Step 8Clean the brake drum. Use a wire brush. Use all-purpose cleaning spray.
- Step 9Remove the wheel hub nut cap. Use a crowbar. Use a hammer.
- Step 10Remove the cotter pin securing the hub nut. Use a crowbar. Use a hammer.
- Step 11Unscrew the hub nut. Use a drive socket #24. Use a ratchet wrench.
- Step 12Remove the brake drum assembled with the wheel hub bearing.Replacement: wheel bearing – VW 1500,1600 (31). Tip:Examine the brake drum. Replace it if necessary.
- Step 13Clean the hub bearing mounting seat. Use all-purpose cleaning spray.
- Step 14Remove the hub bearing mounting. Use a crowbar.
- Step 15Remove the inner oil seal of the wheel bearing. Use a crowbar.
- Step 16Remove the hub bearing mounting. Use a crowbar.
- Step 17Clean the hub bearing mounting seat.
- Step 18Remove the inner race of the wheel bearing from the brake drum. Use 3-Arm Gear Puller. Use a bush and bearing driver set.
- Step 19Remove the inner race of the wheel bearing from the brake drum. Use a bush and bearing driver set.
- Step 20Install the new inner race of the wheel bearing into the brake drum. Use a bush and bearing driver set. Use a hammer.
- Step 21Install the new inner race of the wheel bearing into the brake drum. Use a bush and bearing driver set. Use a hammer.
- Step 22Treat the inner race and the wheel bearing. Use a multipurpose grease.
- Step 23Install a new hub bearing and secure it.
- Step 24Press in the inner oil seal of the wheel bearing. Use a bush and bearing driver set. Use a hammer.
- Step 25Install a new hub bearing and secure it.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the VW 1500/1600 Saloon (31) model
Popular maintenance tutorials for VW 1500,1600 (31)
Complete guides for changing the Wheel bearings on different VW 1500/1600 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your VW 1500,1600 (31)
View more
- When, why, and how to change engine oil | AUTODOC tips
- How to Use Sandblasting Equipment: Step-by-Step Guide | AUTODOC Tips
- Understanding Airbag Light Warnings | Essential Tips for Car Safety
- What to do if your check engine light is on | AUTODOC tips
Most commonly replaced car parts on VW 1500/1600
Time to replace parts? Get even better deals in our Shop app.

SCAN ME