Disclaimer
How to change rear wheel bearing on VAUXHALL Tigra TwinTop (X04) – replacement guide
downloads:
2
Views:
60
Important!
This replacement procedure can be used for:
VAUXHALL Tigra TwinTop (X04) 1.3 CDTI, VAUXHALL Tigra TwinTop (X04) 1.8, VAUXHALL Tigra TwinTop (X04) 1.4 … View more
The steps may slightly vary depending on the car design.
VAUXHALL Tigra TwinTop (X04) 1.3 CDTI, VAUXHALL Tigra TwinTop (X04) 1.8, VAUXHALL Tigra TwinTop (X04) 1.4 … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Wheel Bearing for Tigra TwinTop (X04) and other VAUXHALL models
Alternative products

Wire brush
WD-40 spray
All-purpose cleaning spray
Copper grease
Torx bit T30
Drive socket # 32
Wheel impact socket #17
Ratchet wrench
Torque wrench
Tap wrench
Hammer
Crow bar
Rubber mallet
Wheel chock
Replacement: wheel bearing – VAUXHALL TIGRA TwinTop. AUTODOC recommends:
- Do not re-use the bearing assembly of your VAUXHALL TIGRA TwinTop car.
- The wheel hub bearing replacement procedure is identical for both wheels on the same axle.
- All work should be done with the engine stopped.
Replacement: wheel bearing – VAUXHALL TIGRA TwinTop. Use the following procedure:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3Raise the rear of the car and secure on supports.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Important! Hold the wheel while unscrewing the fastening bolts. VAUXHALL TIGRA TwinTop - Step 5
Remove the wheel. - Step 6
Clean the brake drum fasteners. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the brake drum fastening Use Torx T30. Use a ratchet wrench. - Step 8
Remove the brake drum.Replacement: wheel bearing – VAUXHALL TIGRA TwinTop. Tip:Examine the brake drum. Replace it if necessary. - Step 9
Remove the hub bearing protection cap. Use a crowbar. Use a hammer.Replacement: wheel bearing – VAUXHALL TIGRA TwinTop. AUTODOC experts recommend:Some cars are not equipped with wheel hub caps. - Step 10
Unscrew the wheel hub axle nut. Use a drive socket #32. Use a tap wrench. - Step 11
Remove the fastening nut. - Step 12
Remove the hub and the bearing together, since they are a sealed unit. - Step 13
Clean the hub bearing mounting seat. Use a wire brush. Use all-purpose cleaning spray. - Step 14
Install the new wheel hub with a bearing. - Step 15
Install the fastening nut.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the VAUXHALL Tigra Mk2 TwinTop (X04) model
Popular maintenance tutorials for VAUXHALL TIGRA TwinTop
Complete guides for changing the Wheel bearings on different VAUXHALL TIGRA models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your VAUXHALL Tigra TwinTop (X04)
View more
Top 5 Mistakes to Avoid for Safe Engine Bay Repairs | AUTODOC Tips
How to get your motorcycle ready for spring
How to Prevent Premature Wear on Your Car Boot Damper | AUTODOC
When, why, and how to change engine oil | AUTODOC tips
Most commonly replaced car parts on VAUXHALL TIGRA
Time to replace parts? Get even better deals in our Shop app.

SCAN ME

























