How to carry out replacement: Wheel Bearing 1.4 VAUXHALL MERIVA Mk II (B)
Disclaimer
Change VAUXHALL MERIVA Mk II (B) 1.7 CDTi Wheel Bearing yourself – manuals and video tutorials

How to change rear wheel bearing on VAUXHALL Meriva Mk II (B) (S10) – replacement guide

downloads: 9
Views: 51
Download your free tutorial and fix VAUXHALL Meriva Mk II (B) (S10) 1.4 problems yourself Download for free 2.99 MB Wheel Bearing for VAUXHALL MERIVA Mk II (B) Shop now
Leave a comment Open in a new tab
Important!
This replacement procedure can be used for:
VAUXHALL Meriva Mk II (B) (S10) 1.3 CDTi, VAUXHALL Meriva Mk II (B) (S10) 1.7 CDTi, VAUXHALL Meriva Mk II (B) (S10) 1.7 CDTi, VAUXHALL Meriva Mk II (B) (S10) 1.4, VAUXHALL Meriva Mk II (B) (S10) 1.4, VAUXHALL Meriva Mk II (B) (S10) 1.3 CDTI, VAUXHALL Meriva Mk II (B) (S10) 1.7 CDTI, VAUXHALL Meriva Mk II (B) (S10) 1.4, VAUXHALL Meriva Mk II (B) (S10) 1.4 LPG, VAUXHALL Meriva Mk II (B) (S10) 1.6 CDTi, VAUXHALL Meriva Mk II (B) (S10) 1.6 CDTi, VAUXHALL Meriva Mk II (B) (S10) 1.6 CDTI … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Wheel Bearing for Meriva Mk II (B) (S10) and other VAUXHALL models
Alternative products
How to change Wheel bearing kit on VAUXHALL MERIVA Mk II (B) 1.4 – step-by-step instructions for straightforward car repair Wheel bearing kit
Tools
Replacement: wheel bearing – VAUXHALL MERIVA Mk II (B). Tools you need:
Wire brush
WD-40 spray
Brake cleaner
All-purpose cleaning spray
Copper grease
Combination spanner #11
Combination spanner #13
Combination spanner #17
Drive socket # E8
Drive socket # 11
Drive socket # 13
Drive socket # 16
Drive socket # E20
Torx bit T30
Wheel impact socket #17
Ratchet wrench
Torque wrench
Tap wrench
Brake hose clip
Brake bleeder kit
Crow bar
Wheel chock
Buy tools
Replacement: wheel bearing – VAUXHALL MERIVA Mk II (B). AUTODOC recommends:
  • Do not re-use the bearing assembly of your VAUXHALL MERIVA Mk II (B) car.
  • The wheel hub bearing replacement procedure is identical for both wheels on the same axle.
  • Warning! Shut down the engine before starting any work – VAUXHALL MERIVA Mk II (B).
Carry out replacement in the following order:
  1. Step 1
    Open the bonnet. Unscrew the brake fluid reservoir cap.
    Step 2
    How to change Wheel Bearing on VAUXHALL MERIVA Mk II (B) 2010 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 3
    How to replace VAUXHALL Meriva Mk II (B) (S10) 1.4 2011 Wheel Bearing - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 4
    Raise the rear of the car and secure on supports.
    Step 5
    VAUXHALL MERIVA Mk II (B) 1.7 CDTi 2012 Wheel Bearing replacement: free workshop manuals
    Unscrew the wheel bolts.
    AUTODOC recommends:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  4. Step 6
    Changing Wheel Bearing on VAUXHALL Meriva Mk II (B) (S10) 1.7 CDTI 2013 by yourself
    Remove the wheel.
  5. Step 7
    How to remove VAUXHALL MERIVA 1.6 CDTi 2014 Wheel Bearing - online easy-to-follow instructions
    Clean the brake caliper fasteners. Use a wire brush. Use WD-40 spray.
  6. Step 8
    How to replace Wheel Bearing on VAUXHALL Meriva Mk II (B) (S10) 2015: download PDF manuals and video instructions
    Clean the area where the brake hose is connected to the caliper, and the guide pins area. Use a wire brush. Use a brake cleaner.
    AUTODOC recommends:
    Replacement: wheel bearing – VAUXHALL MERIVA Mk II (B). After applying the spray, wait a few minutes.
  7. Step 9
    How hard is it to do yourself: Wheel Bearing replacement on VAUXHALL MERIVA Mk II (B) 1.4 LPG 2016 - download illustrated guide
    Clamp the brake hose off using a brake hose clamp.
  8. Step 10
    Need to know how to renew Wheel Bearing on VAUXHALL MERIVA 2017? This free workshop manual will help you to do it yourself
    Unscrew the brake hose from the brake caliper. Use a combination spanner #11.
  9. Step 11
    Changing of Wheel Bearing on VAUXHALL MERIVA Mk II (B) 2010 won't be an issue if you follow this illustrated step-by-step guide
    Disconnect the brake hose.
  10. Step 12
    VAUXHALL MERIVA 1.7 CDTi Wheel Bearing replacement: online guides and video tutorials
    Unscrew the brake caliper fastening. Use a combination spanner #13.
  11. Step 13
    Replacing Wheel Bearing on VAUXHALL MERIVA Mk II (B) 2012 1.4 by yourself
    Spread the brake pads. Use a crowbar.
  12. Step 14
    Meriva Mk II (B) (S10) 1.6 CDTi 2013 Wheel Bearing DIY replacement workshop manual
    Remove the brake caliper. Use a crowbar.
    Replacement: wheel bearing – VAUXHALL MERIVA Mk II (B). AUTODOC experts recommend:
    Tie the caliper to the suspension or to the body with a wire without disconnecting from the brake hose to prevent depressurization of the brake system.Make sure that the brake caliper is not hanging on the brake hose.Don't press the brake pedal after the brake caliper has been removed. As a result, the piston can fall out from the brake cylinder, and brake fluid leakage and depressurization of the system may occur. Check the brake caliper bracket, brake caliper guide pins and boots. Clean them. Replace, if necessary.
  13. Step 15
    How to change Wheel Bearing on VAUXHALL Meriva Mk II (B) (S10) 2014 - tips and tricks
    Remove the brake pads. Use a crowbar.
  14. Step 16
    Step-by-step recommendations for DIY replacement VAUXHALL MERIVA Mk II (B) 2015 1.6 CDTi Wheel Bearing
    Clean the brake caliper bracket fasteners. Use a wire brush. Use a brake cleaner.
    Replacement: wheel bearing – VAUXHALL MERIVA Mk II (B). Professionals recommend:
    After applying the spray, wait a few minutes.
  15. Step 17
    DIY replacement of Wheel Bearing on VAUXHALL Meriva Mk II (B) (S10) 1.3 CDTI 2016 is not an issue anymore with our step-by-step tutorial
    Unscrew the caliper bracket fastening. Use a drive socket #E20. Use a tap wrench.
  16. Step 18
    How to change Wheel Bearing on VAUXHALL MERIVA Mk II (B) 2010 - free PDF and video manuals
    Remove the caliper bracket.
  17. Step 19
    How to replace VAUXHALL Meriva Mk II (B) (S10) 1.4 2011 Wheel Bearing - step-by-step manuals and video guides
    Clean the brake disc fasteners. Use a wire brush. Use WD-40 spray.
  18. Step 20
    VAUXHALL MERIVA Mk II (B) 1.7 CDTi 2012 Wheel Bearing replacement: free workshop manuals
    Unscrew the brake disc fastening. Use Torx T30. Use a ratchet wrench.
  19. Step 21
    Changing Wheel Bearing on VAUXHALL Meriva Mk II (B) (S10) 1.7 CDTI 2013 by yourself
    Remove the brake disc.
    Replacement: wheel bearing – VAUXHALL MERIVA Mk II (B). Tip from AUTODOC:
    If necessary, use a rubber mallet.
  20. Step 22
    Disconnect the ABS sensor wiring.
    Step 23
    How to remove VAUXHALL MERIVA 1.6 CDTi 2014 Wheel Bearing - online easy-to-follow instructions
    Clean the ABS sensor connector. Use a wire brush. Use all-purpose cleaning spray.
  21. Step 24
    How to replace Wheel Bearing on VAUXHALL Meriva Mk II (B) (S10) 2015: download PDF manuals and video instructions
    Detach the ABS sensor connector. Use a crowbar.
  22. Step 25
    How hard is it to do yourself: Wheel Bearing replacement on VAUXHALL MERIVA Mk II (B) 1.4 LPG 2016 - download illustrated guide
    Clean the fasteners of the wheel hub bearing. Use a wire brush. Use WD-40 spray.
  23. Step 26
    Need to know how to renew Wheel Bearing on VAUXHALL MERIVA 2017? This free workshop manual will help you to do it yourself
    Unscrew the hub bearing mounting. Use a drive socket #16. Use a ratchet wrench.
  24. Step 27
    Changing of Wheel Bearing on VAUXHALL MERIVA Mk II (B) 2010 won't be an issue if you follow this illustrated step-by-step guide
    Treat the fasteners of the wheel hub bearing. Use WD-40 spray.
  25. Step 28
    VAUXHALL MERIVA 1.7 CDTi Wheel Bearing replacement: online guides and video tutorials
    Unscrew the bolt and remove the mounting bracket of the brake hose and the ABS cable. Use a drive socket #E8. Use a ratchet wrench.
  26. Step 29
    Replacing Wheel Bearing on VAUXHALL MERIVA Mk II (B) 2012 1.4 by yourself
    Remove the hub and the bearing together, since they are a sealed unit.
  27. Step 30
    Meriva Mk II (B) (S10) 1.6 CDTi 2013 Wheel Bearing DIY replacement workshop manual
    Remove the brake disc cover.
  28. Step 31
    How to change Wheel Bearing on VAUXHALL Meriva Mk II (B) (S10) 2014 - tips and tricks
    Clean the hub bearing mounting seat. Use a wire brush. Use WD-40 spray.
  29. Step 32
    Step-by-step recommendations for DIY replacement VAUXHALL MERIVA Mk II (B) 2015 1.6 CDTi Wheel Bearing
    Install the brake disc cover.
  30. Step 33
    DIY replacement of Wheel Bearing on VAUXHALL Meriva Mk II (B) (S10) 1.3 CDTI 2016 is not an issue anymore with our step-by-step tutorial
    Install the new wheel hub with a bearing.
  31. Step 34
    How to change Wheel Bearing on VAUXHALL MERIVA Mk II (B) 2010 - free PDF and video manuals
    Tighten the wheel hub bearing fasteners. Use a drive socket #16. Use a ratchet wrench.
  32. Step 35
    How to replace VAUXHALL Meriva Mk II (B) (S10) 1.4 2011 Wheel Bearing - step-by-step manuals and video guides
    Install the mounting bracket of the brake hose and the ABS cable. Use a drive socket #E8. Use a ratchet wrench.
  33. Step 36
    VAUXHALL MERIVA Mk II (B) 1.7 CDTi 2012 Wheel Bearing replacement: free workshop manuals
    Tighten the fastener of the wheel hub bearing. Use a drive socket #16. Use a torque wrench. Tighten it to 50 Nm torque.+45°
    Replacement: wheel bearing – VAUXHALL MERIVA Mk II (B). Tip from AUTODOC experts:
    Important! Be sure to use new fasteners.The wheel bearing unit must not tilt on the axle pin.
  34. Step 37
    Changing Wheel Bearing on VAUXHALL Meriva Mk II (B) (S10) 1.7 CDTI 2013 by yourself
    Treat the fasteners of the wheel hub bearing. Use copper grease.
  35. Step 38
    How to remove VAUXHALL MERIVA 1.6 CDTi 2014 Wheel Bearing - online easy-to-follow instructions
    Attach the ABS sensor connector.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the VAUXHALL Meriva Mk2 (B) (S10) model

VAUXHALL MERIVA Mk II (B) tyre size

Popular maintenance tutorials for VAUXHALL MERIVA Mk II (B)

More manuals for VAUXHALL MERIVA Mk II (B)

Complete guides for changing the Wheel bearings on different VAUXHALL MERIVA models

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY VAUXHALL Meriva Mk II (B) (S10) Wheel Bearing replacement - online guide
Tips & tricks for your VAUXHALL Meriva Mk II (B) (S10)
View more
  • How to change Wheel bearings on VAUXHALL Meriva Mk II (B) (S10) 1.3 CDTI - replacement tricks
    DIY rear axle restoration | Drivetrain restoration – Part 2
    7K views
    Published on: 07/11/2024
  • Changing Hub bearing VAUXHALL MERIVA Mk II (B) 1.4 - Replacement Tips
    How to Swap an M50 Engine in a BMW E30 Turbo | AUTODOC Project
    2K views
    Published on: 15/02/2021
  • Maintenance Hacks - VAUXHALL Meriva Mk II (B) (S10) 1.7 CDTi Wheel bearing kit replacement guide
    How to Fix a Squealing Belt: Causes & Solutions | AUTODOC Expert Tips
    5K views
    Published on: 04/03/2021
  • Replace Wheel hub bearing on VAUXHALL MERIVA Mk II (B) - free video tips
    Prevent Engine Damage: How to Identify Rocker Cover Gasket Issues and Proper Replacement | AUTODOC
    6K views
    Published on: 03/12/2020

Most commonly replaced car parts on VAUXHALL MERIVA

Professional manuals for the most common VAUXHALL models

ОЕ number
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
VAUXHALL Meriva Mk II (B) (S10) Wheel Bearing replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME