Important!
This replacement procedure can be used for:
RENAULT THALIA II (LU1/2_) 1.4, RENAULT THALIA II (LU1/2_) 1.4, RENAULT THALIA II (LU1/2_) 1.2 LPG, RENAULT THALIA II (LU1/2_) 1.6 16V (LU1A, LU1B, LU1D, LU2M), RENAULT THALIA II (LU1/2_) 1.5 dCi, RENAULT THALIA II (LU1/2_) 1.6 16V, RENAULT THALIA II (LU1/2_) 1.2 16V (LU2V), RENAULT THALIA II (LU1/2_) 1.5 dCi, RENAULT THALIA II (LU1/2_) 1.5 dCi View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Wheel Bearing for THALIA II (LU1/2_) and other RENAULT models
Tools
Replacement: wheel bearing – RENAULT THALIA II (LU1/2_). Tools you might need:
Wire brush
All-purpose cleaning spray
Ceramic grease
Torque wrench
Drive socket # 30
Wheel impact socket #17
Ratchet wrench
Tap wrench
Crow bar
Hammer
Circlip pliers
Bush and bearing driver set
Wheel chock
Replacement: wheel bearing – RENAULT THALIA II (LU1/2_). Professionals recommend:
  • Do not re-use the bearing assembly of your RENAULT THALIA II (LU1/2_) car.
  • The wheel hub bearing replacement procedure is identical for both wheels on the same axle.
  • All work should be done with the engine stopped.
Replacement: wheel bearing – RENAULT THALIA II (LU1/2_). Take the following steps:
  1. Step 1
    Secure the wheels with chocks.
    Step 2
    How to change Wheel Bearing on RENAULT THALIA II (LU1/2_) 2008 - free PDF and video manuals
    Loosen the wheel bolts. Use wheel impact socket #17. Use a tap wrench.
  2. Step 3
    Raise the car.
    Replacement: wheel bearing – RENAULT THALIA II (LU1/2_). AUTODOC experts recommend:
    If you are using a jack, make sure it rests on a flat surface without any unevenness.Be sure to additionally secure the car with jack stands.
    Step 4
    How to replace RENAULT THALIA II (LU1/2_) 1.2 16V 2009 Wheel Bearing - step-by-step manuals and video guides
    Unscrew the wheel bolts.
    AUTODOC recommends:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  3. Step 5
    RENAULT THALIA II (LU1/2_) 1.5 dCi 2010 Wheel Bearing replacement: free workshop manuals
    Remove the wheel.
  4. Step 6
    Changing Wheel Bearing on RENAULT THALIA II (LU1/2_) 1.2 LPG 2011 by yourself
    Remove the hub bearing cap. Use a crowbar. Use a hammer.
  5. Step 7
    How to remove RENAULT SYMBOL / THALIA 1.6 2012 Wheel Bearing - online easy-to-follow instructions
    Unscrew the wheel hub fastener. Use a drive socket #30. Use a tap wrench.
  6. Step 8
    How to replace Wheel Bearing on RENAULT THALIA II (LU1/2_) 2013: download PDF manuals and video instructions
    Remove the fastening nut.
  7. Step 9
    How hard is it to do yourself: Wheel Bearing replacement on RENAULT THALIA II (LU1/2_) 1.2 16V 2014 - download illustrated guide
    Remove the brake drum assembled with the wheel hub bearing.
    Replacement: wheel bearing – RENAULT THALIA II (LU1/2_). Tip:
    Examine the brake drum. Replace it if necessary.
  8. Step 10
    Need to know how to renew Wheel Bearing on RENAULT SYMBOL / THALIA 2015? This free workshop manual will help you to do it yourself
    Remove the wheel hub bearing retaining ring. Use circlip pliers.
  9. Step 11
    Changing of Wheel Bearing on RENAULT THALIA II (LU1/2_) 2016 won't be an issue if you follow this illustrated step-by-step guide
    Press out the wheel hub bearing. Use a bush and bearing driver set.
  10. Step 12
    RENAULT SYMBOL / THALIA 1.6 16V Wheel Bearing replacement: online guides and video tutorials
    Clean the hub bearing mounting seat. Use a wire brush.
  11. Step 13
    Replacing Wheel Bearing on RENAULT THALIA II (LU1/2_) 2018 1.2 16V by yourself
    Press fit the new wheel hub bearing into the brake drum. Use a bush and bearing driver set.
    AUTODOC recommends:
    Check to make sure the wheel hub bearing is positioned correctly. Avoid its misalignment.Stop pressing on the surface of the bearing immediately after it has been fitted into its mounting seat.
  12. Step 14
    THALIA II (LU1/2_) 1.6 2019 Wheel Bearing DIY replacement workshop manual
    Install the wheel hub bearing retaining ring. Use circlip pliers.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the RENAULT Symbol / Thalia II model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
RENAULT THALIA II (LU1/2_) Wheel Bearing replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY RENAULT THALIA II (LU1/2_) Wheel Bearing replacement - online guide
Tips & tricks for your RENAULT THALIA II (LU1/2_)
View more
  • How to change Wheel bearings on RENAULT THALIA II (LU1/2_) 1.6 16V - replacement tricks
    How to detect vacuum leaks using a smoke machine | AUTODOC
  • Changing Hub bearing RENAULT THALIA II (LU1/2_) 1.2 16V - Replacement Tips
    How to choose the right engine oil for your car | AUTODOC
  • Maintenance Hacks - RENAULT THALIA II (LU1/2_) 1.5 dCi Wheel bearing kit replacement guide
    DIY starter repair | AUTODOC tips
  • Replace Wheel hub bearing on RENAULT THALIA II (LU1/2_) - free video tips
    How to remove scratches from car plastic | AUTODOC tips