
Disclaimer
How to change rear wheel bearing on RENAULT 11 Van – replacement guide
downloads:
0
Views:
2
Important!
This replacement procedure can be used for:
RENAULT 11 Box (S37_) 1.4 (S373), RENAULT 11 Box (S37_) 1.6 D (S374), RENAULT 11 Box (S37_) 1.4 (S372), RENAULT 11 Box (S37_) 1.2 (S37S), RENAULT 11 Box (S37_) 1.1 (S371) … View more
The steps may slightly vary depending on the car design.
RENAULT 11 Box (S37_) 1.4 (S373), RENAULT 11 Box (S37_) 1.6 D (S374), RENAULT 11 Box (S37_) 1.4 (S372), RENAULT 11 Box (S37_) 1.2 (S37S), RENAULT 11 Box (S37_) 1.1 (S371) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Wheel Bearing for 11 Box (S37_) and other RENAULT models
Wheel bearing kit
Alternative products

WD-40 spray
All-purpose cleaning spray
Multipurpose grease
Copper grease
Torque wrench
Drive socket # 30
Wheel impact socket #17
Tap wrench
Hammer
Rubber mallet
Bush and bearing driver set
Circlip pliers
Crow bar
Wheel chock
Replacement: wheel bearing – RENAULT 11 Box (S37_). AUTODOC experts recommend:
- Do not re-use the bearing assembly of your RENAULT 11 Box (S37_) car.
- The wheel hub bearing replacement procedure is identical for both wheels on the same axle.
- All work should be done with the engine stopped.
Replacement: wheel bearing – RENAULT 11 Box (S37_). Use the following procedure:
- Step 1Secure the wheels with chocks.Step 2Loosen the wheel mounting bolts. Use wheel impact socket #17.
- Step 3Raise the rear of the car and secure on supports.Step 4Unscrew the wheel bolts.Replacement: wheel bearing – RENAULT 11 Box (S37_). Professionals recommend:To avoid injury, hold up the wheel when unscrewing the bolts.
- Step 5Remove the wheel.
- Step 6Remove the hub bearing protection cap. Use a hammer. Use a crowbar.Replacement: wheel bearing – RENAULT 11 Box (S37_). Tip:Some cars are not equipped with wheel hub caps.
- Step 7Clean the wheel hub fastener. Use WD-40 spray.Step 8Unscrew the wheel hub axle nut. Use a drive socket #30. Use a tap wrench.
- Step 9Remove the brake drum assembled with the wheel hub bearing.Replacement: wheel bearing – RENAULT 11 Box (S37_). AUTODOC experts recommend:Examine the brake drum. Replace it if necessary.
- Step 10Clean the fasteners of the wheel hub bearing.
- Step 11Remove the wheel hub bearing retaining ring. Use circlip pliers.
- Step 12Press out the wheel hub bearing. Use a bush and bearing driver set.
- Step 13Clean the hub bearing mounting seat. Use WD-40 spray.
- Step 14Press fit the new wheel hub bearing into the brake drum. Use a bush and bearing driver set.Replacement: wheel bearing – RENAULT 11 Box (S37_). Tip from AUTODOC experts:Check to make sure the wheel hub bearing is positioned correctly. Avoid its misalignment. Stop pressing on the surface of the bearing immediately after it has been fitted into its mounting seat.
- Step 15Install the wheel hub bearing retaining ring. Use circlip pliers.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the RENAULT 11 Van model
Popular maintenance tutorials for RENAULT 11 Box (S37_)
Complete guides for changing the Wheel bearings on different RENAULT 11 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your RENAULT 11 Box (S37_)
View more
- Stop Rust Before It Starts: Top 5 Tips for Car Body Protection | AUTODOC Insights
- 5 causes of turbocharger failure and how to avoid them
- The most common problems when buying a used car | AUTODOC
- What to do if the ABS light comes on: DIY Diagnostics Tips
Most commonly replaced car parts on RENAULT 11
Time to replace parts? Get even better deals in our Shop app.

SCAN ME