How to carry out replacement: Wheel Bearing 1.6 i (C25, D25) OPEL KADETT E Combo (38_, 48_)
Disclaimer
Change OPEL KADETT E Combo (38_, 48_) 1.6 i (C25, D25) Wheel Bearing yourself – manuals and video tutorials

How to change rear wheel bearing on OPEL Kadett E Combo (T85) – replacement guide

downloads: 0
Views: 4
Download your free tutorial and fix OPEL Kadett E Combo (T85) 1.4 i (C25, D25) problems yourself Download for free 2.66 MB Wheel Bearing for OPEL KADETT E Combo (38_, 48_) Shop now
Leave a comment Open in a new tab
Important!
This replacement procedure can be used for:
OPEL Kadett E Combo (T85) 1.7 D (C25, D25), OPEL Kadett E Combo (T85) 1.4 i (C25, D25), OPEL Kadett E Combo (T85) 1.6 i (C25, D25), OPEL Kadett E Combo (T85) 1.7 D (C25, D25), OPEL Kadett E Combo (T85) 1.6 (C25, D25) … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Wheel Bearing for Kadett E Combo (T85) and other OPEL models
Alternative products
How to change Wheel bearing kit on OPEL KADETT E Combo (38_, 48_) 1.6 i (C25, D25) – step-by-step instructions for straightforward car repair Wheel bearing kit
Tools
Replacement: wheel bearing – OPEL KADETT E Combo (38_, 48_). Tools you might need:
Wire brush
WD-40 spray
Brake cleaner
Electronic spray
Copper grease
Torque wrench
Combination spanner #13
Combination spanner #17
Drive socket # E8
Drive socket # 13
Drive socket # 16
Drive socket # E20
Torx bit T30
Wheel impact socket #17
Ratchet wrench
Tap wrench
Hammer
Water pump pliers
Crow bar
Wheel chock
Buy tools
Replacement: wheel bearing – OPEL KADETT E Combo (38_, 48_). AUTODOC experts recommend:
  • Do not re-use the bearing assembly of your OPEL KADETT E Combo (38_, 48_) car.
  • The wheel hub bearing replacement procedure is identical for both wheels on the same axle.
  • Please note: all work on the car – OPEL KADETT E Combo (38_, 48_) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Secure the wheels with chocks.
    Step 2
    How to change Wheel Bearing on OPEL KADETT E Combo (38_, 48_) 1986 - free PDF and video manuals
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  2. Step 3
    Raise the rear of the car and secure on supports.
    Step 4
    How to replace OPEL Kadett E Combo (T85) 1.6 i (C25, D25) 1987 Wheel Bearing - step-by-step manuals and video guides
    Unscrew the wheel bolts.
    AUTODOC recommends:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  3. Step 5
    OPEL KADETT E Combo (38_, 48_) 1.6 D (C25, D25) 1988 Wheel Bearing replacement: free workshop manuals
    Remove the wheel.
  4. Step 6
    Changing Wheel Bearing on OPEL Kadett E Combo (T85) 1.3 N (C25, D25) 1989 by yourself
    Clean the brake caliper fasteners. Use a wire brush. Use WD-40 spray.
  5. Step 7
    How to remove OPEL KADETT 1.3 S (C25, D25) 1990 Wheel Bearing - online easy-to-follow instructions
    Release the parking brake cable. Use water pump pliers. Use a crowbar.
  6. Step 8
    How to replace Wheel Bearing on OPEL Kadett E Combo (T85) 1991: download PDF manuals and video instructions
    Unscrew the brake caliper fastening. Use a combination spanner #13. Use a combination spanner #17.
  7. Step 9
    How hard is it to do yourself: Wheel Bearing replacement on OPEL KADETT E Combo (38_, 48_) 1.4 S (C25, D25) 1992 - download illustrated guide
    Spread the brake pads. Use a crowbar.
  8. Step 10
    Need to know how to renew Wheel Bearing on OPEL KADETT 1993? This free workshop manual will help you to do it yourself
    Remove the brake caliper.
    Replacement: wheel bearing – OPEL KADETT E Combo (38_, 48_). Tip from AUTODOC:
    Tie the caliper to the suspension or to the body with a wire without disconnecting from the brake hose to prevent depressurization of the brake system.Make sure that the brake caliper is not hanging on the brake hose.Don't press the brake pedal after the brake caliper has been removed. As a result, the piston can fall out from the brake cylinder, and brake fluid leakage and depressurization of the system may occur. Check the brake caliper bracket, brake caliper guide pins and boots. Clean them. Replace, if necessary.
  9. Step 11
    Changing of Wheel Bearing on OPEL KADETT E Combo (38_, 48_) 1994 won't be an issue if you follow this illustrated step-by-step guide
    Remove the brake pads. Use a crowbar.
  10. Step 12
    OPEL KADETT 1.6 i (C25, D25) Wheel Bearing replacement: online guides and video tutorials
    Clean the brake caliper bracket fasteners. Use a wire brush. Use a brake cleaner.
    AUTODOC recommends:
    Replacement: wheel bearing – OPEL KADETT E Combo (38_, 48_). After applying the spray, wait a few minutes.
  11. Step 13
    Replacing Wheel Bearing on OPEL KADETT E Combo (38_, 48_) 1987 1.6 i (C25, D25) by yourself
    Unscrew the caliper bracket fastening. Use a drive socket #Е20. Use a tap wrench.
  12. Step 14
    Kadett E Combo (T85) 1.3 S (C25, D25) 1988 Wheel Bearing DIY replacement workshop manual
    Remove the caliper bracket.
  13. Step 15
    How to change Wheel Bearing on OPEL Kadett E Combo (T85) 1989 - tips and tricks
    Clean the brake disc fasteners. Use a wire brush. Use WD-40 spray.
  14. Step 16
    Step-by-step recommendations for DIY replacement OPEL KADETT E Combo (38_, 48_) 1990 1.3 S (C25, D25) Wheel Bearing
    Unscrew the brake disc fastening. Use Torx T30. Use a ratchet wrench.
  15. Step 17
    DIY replacement of Wheel Bearing on OPEL Kadett E Combo (T85) 1.7 D (C25, D25) 1991 is not an issue anymore with our step-by-step tutorial
    Remove the brake disc. Use a hammer.
  16. Step 18
    How to change Wheel Bearing on OPEL KADETT E Combo (38_, 48_) 1986 - free PDF and video manuals
    Disconnect the ABS sensor wiring.
  17. Step 19
    How to replace OPEL Kadett E Combo (T85) 1.6 i (C25, D25) 1987 Wheel Bearing - step-by-step manuals and video guides
    Detach the ABS sensor connector. Use a crowbar.
  18. Step 20
    OPEL KADETT E Combo (38_, 48_) 1.6 D (C25, D25) 1988 Wheel Bearing replacement: free workshop manuals
    Clean the fasteners of the wheel hub bearing. Use a wire brush. Use WD-40 spray.
  19. Step 21
    Changing Wheel Bearing on OPEL Kadett E Combo (T85) 1.3 N (C25, D25) 1989 by yourself
    Unscrew the hub bearing nuts. Use a drive socket #16. Use a ratchet wrench.
  20. Step 22
    How to remove OPEL KADETT 1.3 S (C25, D25) 1990 Wheel Bearing - online easy-to-follow instructions
    Unscrew the fastener of the ABS wiring harness bracket. Use a drive socket #Е8. Use a ratchet wrench.
  21. Step 23
    Remove the ABS wiring harness bracket.
    Step 24
    How to replace Wheel Bearing on OPEL Kadett E Combo (T85) 1991: download PDF manuals and video instructions
    Remove the hub bearing together with the brake disc protection plate.
  22. Step 25
    How hard is it to do yourself: Wheel Bearing replacement on OPEL KADETT E Combo (38_, 48_) 1.4 S (C25, D25) 1992 - download illustrated guide
    Clean the hub bearing mounting seat. Use a wire brush. Use WD-40 spray.
  23. Step 26
    Need to know how to renew Wheel Bearing on OPEL KADETT 1993? This free workshop manual will help you to do it yourself
    Detach the hub bearing from the brake disc protection plate. Use a hammer.
  24. Step 27
    Changing of Wheel Bearing on OPEL KADETT E Combo (38_, 48_) 1994 won't be an issue if you follow this illustrated step-by-step guide
    Treat the fasteners of the wheel hub bearing. Use copper grease.
  25. Step 28
    Install a new wheel hub bearing.
    Step 29
    OPEL KADETT 1.6 i (C25, D25) Wheel Bearing replacement: online guides and video tutorials
    Install the hub bearing together with the brake disc protection plate.
  26. Step 30
    Replacing Wheel Bearing on OPEL KADETT E Combo (38_, 48_) 1987 1.6 i (C25, D25) by yourself
    Screw in the hub bearing nuts. Use a drive socket #16. Use a ratchet wrench.
  27. Step 31
    Kadett E Combo (T85) 1.3 S (C25, D25) 1988 Wheel Bearing DIY replacement workshop manual
    Tighten the hub bearing nuts. Use a drive socket #16. Use a torque wrench. Tighten it to 50 Nm torque.+45°
    AUTODOC recommends:
    Important! Be sure to use new fasteners.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the OPEL Kadett E Combo (T85) model

OPEL KADETT E Combo (38_, 48_) tyre size

Popular maintenance tutorials for OPEL KADETT E Combo (38_, 48_)

More manuals for OPEL KADETT E Combo (38_, 48_)

Complete guides for changing the Wheel bearings on different OPEL KADETT models

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY OPEL Kadett E Combo (T85) Wheel Bearing replacement - online guide
Tips & tricks for your OPEL Kadett E Combo (T85)
View more
  • How to change Wheel bearings on OPEL Kadett E Combo (T85) 1.7 D (C25, D25) - replacement tricks
    TOP 8 mistakes car owners make | AUTODOC tips
    14K views
    Published on: 09/12/2021
  • Changing Hub bearing OPEL KADETT E Combo (38_, 48_) 1.6 i (C25, D25) - Replacement Tips
    How to unlock your car without a key | AUTODOC tips
    2M views
    Published on: 15/09/2022
  • Maintenance Hacks - OPEL Kadett E Combo (T85) 1.6 D (C25, D25) Wheel bearing kit replacement guide
    3 essential tips for choosing summer tyres | Get ready for warmer weather
    4K views
    Published on: 18/05/2023
  • Replace Wheel hub bearing on OPEL KADETT E Combo (38_, 48_) - free video tips
    Checking the starter without removing it | AUTODOC tips
    28K views
    Published on: 01/12/2020

Most commonly replaced car parts on OPEL KADETT

Professional manuals for the most common OPEL models

ОЕ number
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
OPEL Kadett E Combo (T85) Wheel Bearing replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME