Disclaimer
How to change rear wheel bearing on OPEL KADETT C – replacement guide
downloads:
1
Views:
11
Important!
This replacement procedure can be used for:
OPEL KADETT C 1.6 S, OPEL KADETT C 1.2 S, OPEL KADETT C 1.2, OPEL KADETT C 1.2, OPEL KADETT C 1.0 … View more
The steps may slightly vary depending on the car design.
OPEL KADETT C 1.6 S, OPEL KADETT C 1.2 S, OPEL KADETT C 1.2, OPEL KADETT C 1.2, OPEL KADETT C 1.0 … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Wheel Bearing for KADETT C and other OPEL models
Alternative products

All-purpose cleaning spray
Bearing grease
Ceramic grease
Torque wrench
Drive socket # 24
Wheel impact socket #17
Universal puller
Bush and bearing driver set
Ratchet wrench
Flat screwdriver
Hammer
Rubber mallet
Crow bar
Wheel chock
AUTODOC recommends:
- Do not re-use the bearing assembly of your OPEL KADETT C car.
- The wheel hub bearing replacement procedure is identical for both wheels on the same axle.
- Please note: all work on the car – OPEL KADETT C – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1Secure the wheels with chocks.Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3Raise the car.Replacement: wheel bearing – OPEL KADETT C. Professionals recommend:If you are using a jack, make sure it rests on a flat surface without any unevenness.Be sure to additionally secure the car with jack stands.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. OPEL KADETT C - Step 5
Remove the wheel. - Step 6
Remove the wheel hub nut cap. Use a crowbar. Use a hammer. - Step 7
Remove the cotter pin securing the hub nut. Use a crowbar. Use a flat screwdriver. - Step 8
Unscrew the hub nut. Use a drive socket #24. Use a ratchet wrench. - Step 9
Remove the wheel bearing washer. Use a crowbar. - Step 10
Remove the wheel hub bearing. Use a crowbar. - Step 11
Remove the brake drum assembled with the wheel hub bearing.Replacement: wheel bearing – OPEL KADETT C. Tip from AUTODOC:Examine the brake drum. Replace it if necessary. - Step 12
Remove the inner oil seal of the wheel bearing. Use a crowbar. - Step 13
Remove the wheel hub bearing. Use a crowbar. - Step 14
Clean the hub bearing mounting seat. - Step 15
Remove the inner race of the wheel bearing from the brake drum. Use a universal puller. - Step 16
Remove the wheel bearing's outer race from the brake drum. Use a bush and bearing driver set. - Step 17
Clean the hub bearing mounting seat. Use all-purpose cleaning spray. - Step 18
Install a new wheel bearing outer race in the brake drum. Bush and bearing driver set. - Step 19
Install the new inner race of the wheel bearing into the brake drum. Bush and bearing driver set. - Step 20
Treat the wheel hub bearing. Use bearing grease. - Step 21
Install a new hub bearing and secure it. - Step 22
Install the wheel bearing oil seal. - Step 23
Treat the stub axle. Use all-purpose cleaning spray. Use bearing grease.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the OPEL Kadett C Saloon model
Popular maintenance tutorials for Opel Kadett C Saloon
Complete guides for changing the Wheel bearings on different OPEL KADETT models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your OPEL KADETT C
View more
What causes engine misfire? | AUTODOC
Understanding Car Tools: The Key Differences You Need to Know | AUTODOC tips
5 Essential Tips to Prepare Your Car for Winter | AUTODOC tips
Three ways to change oil without a lift
Most commonly replaced car parts on OPEL KADETT
ОЕ number
Time to replace parts? Get even better deals in our Shop app.

SCAN ME





























