Disclaimer
How to change rear wheel bearing on CITROËN C6 (TD_) – replacement guide
downloads:
1
Views:
17
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Wheel Bearing for C6 (TD_) and other CITROËN models
Alternative products
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #19. - Step 3Raise the rear of the car and secure on supports.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. CITROËN C6 (TD_) - Step 5
Remove the wheel. - Step 6Clean the brake caliper fasteners. Use a wire brush. Use WD-40 spray.Step 7
Unscrew the brake caliper fastening. Use a combination spanner #13. Use a combination spanner #15. - Step 8
Spread the brake pads. Use a crowbar. - Step 9
Remove the brake caliper.Replacement: wheel bearing – CITROËN C6 (TD_). AUTODOC experts recommend:Tie the caliper to the suspension or to the body with a wire without disconnecting from the brake hose to prevent depressurization of the brake system.Make sure that the brake caliper is not hanging on the brake hose.Don't press the brake pedal after the brake caliper has been removed. As a result, the piston can fall out from the brake cylinder, and brake fluid leakage and depressurization of the system may occur.Check the brake caliper bracket, brake caliper guide pins and boots. Clean them. Replace, if necessary. - Step 10
Remove the brake pads. - Step 11
Clean the brake caliper bracket fasteners. Use a wire brush. Use WD-40 spray. - Step 12
Unscrew the caliper bracket fastening. Use Torx T55. Use a ratchet wrench. - Step 13
Remove the caliper bracket. - Step 14Clean the brake disc fasteners. Use a wire brush. Use WD-40 spray.Step 15
Unscrew the brake disc fastening. Use Torx T30. Use a ratchet wrench. - Step 16
Remove the brake disc. - Step 17
Remove the hub bearing protection cap. Use a crowbar. Use a hammer. - Step 18
Unstake the wheel hub retaining nut. Use a flat metal-working chisel. Use a hammer. - Step 19
Unscrew the wheel hub axle nut. Use a drive socket #41. Use a ratchet wrench. - Step 20
Remove the fastening nut. - Step 21
Remove the hub and the bearing together, since they are a sealed unit. - Step 22
Install the new wheel hub with a bearing. Use a rubber mallet. - Step 23
Install the fastening nut.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the CITROËN C6 Saloon model
Popular maintenance tutorials for Citroen C6 Saloon
Complete guides for changing the Wheel bearings on different CITROËN C6 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your CITROËN C6 (TD_)
View more
When, why, and how to change engine oil | AUTODOC tips
5 signs of a faulty strut mount and how to fix it
Drive with Care: 8 Common Bad Driving Habits Explained | AUTODOC
5 possible reasons why your car heater isn't working
Most commonly replaced car parts on CITROËN C6
Time to replace parts? Get even better deals in our Shop app.

SCAN ME
































