
Disclaimer
How to change rear wheel bearing on CITROËN BERLINGO Box (B9) – replacement guide
downloads:
0
Views:
5
Important!
This replacement procedure can be used for:
CITROËN BERLINGO Box (B9) 1.6 … View more
The steps may slightly vary depending on the car design.
CITROËN BERLINGO Box (B9) 1.6 … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Wheel Bearing for BERLINGO Box (B9) and other CITROËN models
Alternative products

Wire brush
WD-40 spray
All-purpose cleaning spray
Copper grease
Torx bit T30
Drive socket # 32
Drive socket # 34
Wheel impact socket #19
Torque wrench
Flat chisel
Hammer
Tap wrench
Impact screwdriver
Rubber mallet
3-Arm Gear Puller
Crow bar
Wheel chock
Replacement: wheel bearing – CITROËN BERLINGO Box (B9). AUTODOC experts recommend:
- Do not re-use the bearing assembly of your CITROËN BERLINGO Box (B9) car.
- The wheel hub bearing replacement procedure is identical for both wheels on the same axle.
- Warning! Shut down the engine before starting any work – CITROËN BERLINGO Box (B9).
Carry out replacement in the following order:
- Step 1Secure the wheels with chocks.
- Step 2Loosen the wheel mounting bolts. Use wheel impact socket #19.
- Step 3Raise the rear of the car and secure on supports.Step 4Unscrew the wheel bolts.Replacement: wheel bearing – CITROËN BERLINGO Box (B9). Tip:To avoid injury, hold up the wheel when unscrewing the bolts.
- Step 5Remove the wheel.
- Step 6Clean the brake drum. Use a wire brush. Use WD-40 spray.
- Step 7Unscrew the brake drum fastening. Use Torx T30. Use an impact screwdriver. Use a hammer.
- Step 8Remove the brake drum. Use a crowbar. Use a hammer.Replacement: wheel bearing – CITROËN BERLINGO Box (B9). AUTODOC recommends:Examine the brake drum. Replace it if necessary.
- Step 9Remove the hub bearing protection cap. Use a crowbar. Use a hammer.Replacement: wheel bearing – CITROËN BERLINGO Box (B9). Tip from AUTODOC:Some cars are not equipped with wheel hub caps.
- Step 10Unstake the wheel hub retaining nut. Use a flat metal-working chisel. Use a hammer.
- Step 11Unscrew the wheel hub axle nut. Use a drive socket #34. Use a tap wrench.
- Step 12Remove the hub and the bearing together, since they are a sealed unit. Use 3-Arm Gear Puller.
- Step 13Clean the hub bearing mounting seat. Use all-purpose cleaning spray.
- Step 14Install the new wheel hub with a bearing.
- Step 15Tighten the hub. Use a drive socket #32. Use a torque wrench. Tighten it to 225 Nm torque.Replacement: wheel bearing – CITROËN BERLINGO Box (B9). Tip from AUTODOC experts:The wheel bearing unit must not tilt on the axle pin.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the CITROËN Berlingo II Van (B9) model
Popular maintenance tutorials for Citroen Berlingo mk2
Complete guides for changing the Wheel bearings on different CITROËN BERLINGO models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your CITROËN BERLINGO Box (B9)
View more
- Top 4 Car Cleaning Products to Protect Your Car's Body | AUTODOC Tips
- 5 most common causes of oil leaks | AUTODOC tips
- Regain Your Confidence on the Road: Easy Headlight Restoration Tips
- Coolant comparison test | AUTODOC
Most commonly replaced car parts on CITROËN BERLINGO
Time to replace parts? Get even better deals in our Shop app.

SCAN ME