Disclaimer
How to change rear strut mount on VW Golf 2 – replacement guide
downloads:
5
Views:
45
Important!
This replacement procedure can be used for:
VW GOLF II (19E, 1G1) 1.3, VW GOLF II (19E, 1G1) 1.6, VW GOLF II (19E, 1G1) 1.6, VW GOLF II (19E, 1G1) 1.8 GTI G60 Syncro, VW GOLF II (19E, 1G1) 1.8, VW GOLF II (19E, 1G1) 1.8 Syncro, VW GOLF II (19E, 1G1) 1.8 i Cat, VW GOLF II (19E, 1G1) 1.8 Syncro, VW GOLF II (19E, 1G1) 1.8 GTI Cat, VW GOLF II (19E, 1G1) 1.8 GTI, VW GOLF II (19E, 1G1) 1.8 GTI 16V, VW GOLF II (19E, 1G1) 1.8 GTI 16V, VW GOLF II (19E, 1G1) 1.8 GTI G60, VW GOLF II (19E, 1G1) 1.6 D, VW GOLF II (19E, 1G1) 1.6 TD, VW GOLF II (19E, 1G1) 1.6 TD, VW GOLF II (19E, 1G1) 1.6 TD, VW GOLF II (19E, 1G1) 1.3 Cat, VW GOLF II (19E, 1G1) 1.8 GTI, VW GOLF II (19E, 1G1) 1.8, VW GOLF II (19E, 1G1) 1.0, VW GOLF II (19E, 1G1) 1.0, VW GOLF II (19E, 1G1) 1.8 GTI, VW GOLF II (19E, 1G1) 1.6, VW GOLF II (19E, 1G1) 1.3, VW GOLF II (19E, 1G1) 1.3, VW GOLF II (19E, 1G1) 1.8 GTI 16V, VW GOLF II (19E, 1G1) 1.6, VW GOLF II (19E, 1G1) 1.8 Syncro, VW GOLF II (19E, 1G1) 1.8 … View more
The steps may slightly vary depending on the car design.
VW GOLF II (19E, 1G1) 1.3, VW GOLF II (19E, 1G1) 1.6, VW GOLF II (19E, 1G1) 1.6, VW GOLF II (19E, 1G1) 1.8 GTI G60 Syncro, VW GOLF II (19E, 1G1) 1.8, VW GOLF II (19E, 1G1) 1.8 Syncro, VW GOLF II (19E, 1G1) 1.8 i Cat, VW GOLF II (19E, 1G1) 1.8 Syncro, VW GOLF II (19E, 1G1) 1.8 GTI Cat, VW GOLF II (19E, 1G1) 1.8 GTI, VW GOLF II (19E, 1G1) 1.8 GTI 16V, VW GOLF II (19E, 1G1) 1.8 GTI 16V, VW GOLF II (19E, 1G1) 1.8 GTI G60, VW GOLF II (19E, 1G1) 1.6 D, VW GOLF II (19E, 1G1) 1.6 TD, VW GOLF II (19E, 1G1) 1.6 TD, VW GOLF II (19E, 1G1) 1.6 TD, VW GOLF II (19E, 1G1) 1.3 Cat, VW GOLF II (19E, 1G1) 1.8 GTI, VW GOLF II (19E, 1G1) 1.8, VW GOLF II (19E, 1G1) 1.0, VW GOLF II (19E, 1G1) 1.0, VW GOLF II (19E, 1G1) 1.8 GTI, VW GOLF II (19E, 1G1) 1.6, VW GOLF II (19E, 1G1) 1.3, VW GOLF II (19E, 1G1) 1.3, VW GOLF II (19E, 1G1) 1.8 GTI 16V, VW GOLF II (19E, 1G1) 1.6, VW GOLF II (19E, 1G1) 1.8 Syncro, VW GOLF II (19E, 1G1) 1.8 … View more
The steps may slightly vary depending on the car design.
How to change rear strut mount VW GOLF 2 [TUTORIAL AUTODOC]

All the parts you need to replace – Strut Mount for GOLF II (19E, 1G1) and other VW models
Alternative products

Wire brush
WD-40 spray
Copper grease
Torque wrench
Combination spanner #17
Drive socket # 17
Shock absorber socket #DD6
Wheel impact socket #17
Ratchet wrench
Tap wrench
Hydraulic transmission jack
Wheel chock
Replacement: strut mount – VW Golf 2. AUTODOC experts recommend:
- The replacement procedure is identical for the mounts of the left and right shock struts of the rear suspension.
- All mounts of the rear shock struts should be replaced simultaneously.
- Please note: all work on the car – VW Golf 2 – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1
Open the boot lid. - Step 2
Clean the upper fastener of the suspension strut mount. Use a wire brush. Use WD-40 spray. - Step 3
Loosen the upper fastener of the shock strut mount. Use a combination spanner #17. Use a shock absorber socket DD№6. Use a ratchet wrench. - Step 4Secure the wheels with chocks.Step 5
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 6
Raise the rear of the car and secure on supports. - Step 7
Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. VW Golf 2 - Step 8
Remove the wheel. - Step 9
Clean the lower fastener connecting the suspension strut to the steering knuckle. Use a wire brush. Use WD-40 spray. - Step 10
Unscrew the lower fastener connecting the shock strut to the steering knuckle. Use a combination spanner #17. Use a drive socket #17. Use a tap wrench. - Step 11
Remove the fastening bolt. - Step 12
Support the rear suspension beam. Use a hydraulic transmission jack. - Step 13
Unscrew the upper fastener connecting the shock strut to the steering knuckle.AUTODOC recommends:Important! Hold the suspension strut while unscrewing the fastening bolts. VW Golf 2 - Step 14
Remove the suspension strut. - Step 15
Remove the top strut mount.Replacement: strut mount – VW Golf 2. Professionals recommend:Examine the shock absorber dust cap and the bump stop. Replace them if necessary. - Step 16
Clean the mounting seats of the shock strut. Use a wire brush. Use WD-40 spray. - Step 17
Install a new top shock strut mount. - Step 18
Install the shock strut into the wheel arch.AUTODOC recommends:VW Golf 2 – To avoid injury, hold the suspension strut while screwing in the fastening bolts. - Step 19
Raise the hydraulic transmission jack by 10-15 cm.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the VW Golf II Hatchback (19E, 1G1) model
Popular maintenance tutorials for VW GOLF II (19E, 1G1)
Complete guides for changing the Strut mount on different VW GOLF models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your VW GOLF II (19E, 1G1)
View more
How to remove rust | AUTODOC tips
How to Fix a Squealing Belt: Causes & Solutions | AUTODOC Expert Tips
Unveiling the secrets: Detecting vacuum leaks with a Smoke Machine | AUTODOC
TOP 5 mistakes during DIY oil change | AUTODOC tips
Most commonly replaced car parts on VW GOLF
Time to replace parts? Get even better deals in our Shop app.

SCAN ME































