Important!
This replacement procedure can be used for:
MERCEDES-BENZ E-Class Convertible (A207) E 350 CDI (207.423), MERCEDES-BENZ E-Class Convertible (A207) E 300 (207.455), MERCEDES-BENZ E-Class Convertible (A207) E 350 (207.459), MERCEDES-BENZ E-Class Convertible (A207) E 500 (207.473), MERCEDES-BENZ E-Class Convertible (A207) E 220 CDI / BlueTEC / d (207.402, 207.401), MERCEDES-BENZ E-Class Convertible (A207) E 250 CDI / BlueTEC / d (207.403, 207.404), MERCEDES-BENZ E-Class Convertible (A207) E 350 CDI (207.422), MERCEDES-BENZ E-Class Convertible (A207) E 200 CGI (207.448), MERCEDES-BENZ E-Class Convertible (A207) E 250 CGI (207.447), MERCEDES-BENZ E-Class Convertible (A207) E 350 CGI (207.457), MERCEDES-BENZ E-Class Convertible (A207) E 500 (207.472), MERCEDES-BENZ E-Class Convertible (A207) E 220 CDI (207.402), MERCEDES-BENZ E-Class Convertible (A207) E 350 BlueTEC (207.426), MERCEDES-BENZ E-Class Convertible (A207) E 200 (207.434), MERCEDES-BENZ E-Class Convertible (A207) E 250 (207.436), MERCEDES-BENZ E-Class Convertible (A207) E 400 (207.465), MERCEDES-BENZ E-Class Convertible (A207) E 220 BlueTEC (207.401), MERCEDES-BENZ E-Class Convertible (A207) E 350 BlueTEC/ d (207.426), MERCEDES-BENZ E-Class Convertible (A207) E 320 (207.462), MERCEDES-BENZ E-Class Convertible (A207) E 400 (207.461) View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Control Arm for E-Class Convertible (A207) and other MERCEDES-BENZ models
Tools
Replacement: rear lower arm – MERCEDES-BENZ E-CLASS Convertible (A207). Tools you might need:
Wire brush
WD-40 spray
Brake cleaner
Ceramic grease
Copper grease
Torque wrench
Combination spanner #18
Drive socket # 10
Drive socket # 18
Torx bit E10
Torx bit E14
XZN socket bit # 12
Wheel impact socket #17
Ratchet wrench
Flat screwdriver
Hydraulic transmission jack
Wheel chock
Replacement: rear lower arm – MERCEDES-BENZ E-CLASS Convertible (A207). Tip from AUTODOC:
  • The replacement procedure is identical for the left and right lower control arms.
  • Please note: all work on the car – MERCEDES-BENZ E-CLASS Convertible (A207) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Secure the wheels with chocks.
    Step 2
    How to change Control Arm on Mercedes A207 2010 - free PDF and video manuals
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  2. Step 3
    Raise the car.
    Replacement: rear lower arm – MERCEDES-BENZ E-CLASS Convertible (A207). AUTODOC experts recommend:
    If you are using a jack, make sure it rests on a flat surface without any unevenness.Be sure to additionally secure the car with jack stands.
    Step 4
    How to replace MERCEDES-BENZ E-Class Convertible (A207) E 350 CDI 3.0 (207.422) 2011 Control Arm - step-by-step manuals and video guides
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. MERCEDES-BENZ E-CLASS Convertible (A207)
  3. Step 5
    Mercedes A207 E 220 CDI / BlueTEC / d (207.402, 207.401) 2012 Control Arm replacement: free workshop manuals
    Remove the wheel.
  4. Step 6
    Changing Control Arm on MERCEDES-BENZ E-Class Convertible (A207) E 200 CGI 1.8 (207.448) 2013 by yourself
    Unclip the fasteners and remove the suspension arm plastic cover. Use a flat screwdriver.
  5. Step 7
    How to remove MERCEDES-BENZ E-CLASS E 250 CGI 1.8 (207.447) 2014 Control Arm - online easy-to-follow instructions
    Unscrew the fasteners of the underbody plastic cover. Use a drive socket #10. Use a ratchet wrench.
  6. Step 8
    How to replace Control Arm on MERCEDES-BENZ E-Class Convertible (A207) 2015: download PDF manuals and video instructions
    Clean all joints of the arm. Use a wire brush. Use WD-40 spray.
  7. Step 9
    How hard is it to do yourself: Control Arm replacement on Mercedes A207 E 350 CDI (207.423) 2016 - download illustrated guide
    Unscrew the fastener that connects the suspension arm to the stub axle. Use a combination spanner #18. Use XZN #12. Use a ratchet wrench.
  8. Step 10
    Need to know how to renew Control Arm on MERCEDES-BENZ E-CLASS 2010? This free workshop manual will help you to do it yourself
    Remove the fastening bolt.
  9. Step 11
    Changing of Control Arm on Mercedes A207 2011 won't be an issue if you follow this illustrated step-by-step guide
    Clean the subframe bracket fasteners. Use a wire brush. Use WD-40 spray.
  10. Step 12
    MERCEDES-BENZ E-CLASS E 350 3.5 (207.459) Control Arm replacement: online guides and video tutorials
    Support the subframe. Use a hydraulic transmission jack.
  11. Step 13
    Replacing Control Arm on Mercedes A207 2013 E 350 CDI 3.0 (207.422) by yourself
    Unscrew the subframe bracket fasteners. This is necessary to access the upper fastening bolt of the suspension arm. Use Torx E10. Use Torx E14. Use a ratchet wrench.
  12. Step 14
    E-Class Convertible (A207) E 250 CGI 1.8 (207.447) 2014 Control Arm DIY replacement workshop manual
    Remove the fastening bolts.
  13. Step 15
    How to change Control Arm on MERCEDES-BENZ E-Class Convertible (A207) 2015 - tips and tricks
    Remove the subframe bracket.
  14. Step 16
    Step-by-step recommendations for DIY replacement Mercedes A207 2016 E 250 CGI 1.8 (207.447) Control Arm
    Unscrew the fastener connecting the control arm to the subframe. Use a combination spanner #18. Use XZN #12. Use a ratchet wrench.
  15. Step 17
    DIY replacement of Control Arm on MERCEDES-BENZ E-Class Convertible (A207) E 250 CDI / BlueTEC / d (207.403, 207.404) 2010 is not an issue anymore with our step-by-step tutorial
    Remove the fastening bolt.
  16. Step 18
    How to change Control Arm on Mercedes A207 2010 - free PDF and video manuals
    Remove the arm.
  17. Step 19
    How to replace MERCEDES-BENZ E-Class Convertible (A207) E 350 CDI 3.0 (207.422) 2011 Control Arm - step-by-step manuals and video guides
    Clean the suspension arm mounting seats. Use a wire brush. Use WD-40 spray.
  18. Step 20
    Mercedes A207 E 220 CDI / BlueTEC / d (207.402, 207.401) 2012 Control Arm replacement: free workshop manuals
    Clean the subframe bracket mounting seats. Use a wire brush. Use WD-40 spray.
  19. Step 21
    Changing Control Arm on MERCEDES-BENZ E-Class Convertible (A207) E 200 CGI 1.8 (207.448) 2013 by yourself
    Install a new arm.
    Replacement: rear lower arm – MERCEDES-BENZ E-CLASS Convertible (A207). Professionals recommend:
    During the installation process, use only new bolts and nuts.
  20. Step 22
    How to remove MERCEDES-BENZ E-CLASS E 250 CGI 1.8 (207.447) 2014 Control Arm - online easy-to-follow instructions
    Install the fastening bolts.
  21. Step 23
    How to replace Control Arm on MERCEDES-BENZ E-Class Convertible (A207) 2015: download PDF manuals and video instructions
    Install the subframe bracket.
  22. Step 24
    How hard is it to do yourself: Control Arm replacement on Mercedes A207 E 350 CDI (207.423) 2016 - download illustrated guide
    Install the fastening bolts.
  23. Step 25
    Need to know how to renew Control Arm on MERCEDES-BENZ E-CLASS 2010? This free workshop manual will help you to do it yourself
    Tighten the subframe bracket fasteners. Use Torx E10. Use a torque wrench. Tighten it to 28 Nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the MERCEDES-BENZ E-Class Convertible (A207) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
MERCEDES-BENZ E-Class Convertible (A207) Control Arm replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY MERCEDES-BENZ E-Class Convertible (A207) Control Arm replacement - online guide
Tips & tricks for your MERCEDES-BENZ E-Class Convertible (A207)
View more
  • How to change Control arm on MERCEDES-BENZ E-Class Convertible (A207) E 250 CDI / BlueTEC / d (207.403, 207.404) - replacement tricks
    What to do if your car heater isn't working | AUTODOC tips
  • Changing Wishbone Mercedes A207 E 350 CDI 3.0 (207.422) - Replacement Tips
    How and why to check your oil | AUTODOC tips
  • Maintenance Hacks - MERCEDES-BENZ E-Class Convertible (A207) E 220 CDI / BlueTEC / d (207.402, 207.401) Control arms replacement guide
    How to prevent car windows from fogging up | AUTODOC tips
  • Replace Trailing arm on Mercedes A207 - free video tips
    DIY alternator repair | AUTODOC tips