How to carry out replacement: Engine Mount 1.9 TDI Seat Cordoba 6L2
Disclaimer
Change Seat Cordoba 6L2 1.4 TDI Engine Mount yourself – manuals and video tutorials

How to change rear engine mounts on SEAT Cordoba Saloon (6L2) – replacement guide

downloads: 3
Views: 25
Download your free tutorial and fix SEAT Cordoba Saloon (6L2) 1.9 SDI problems yourself Download for free 1.24 MB Engine Mount for Seat Cordoba 6L2 Shop now
Leave a comment Open in a new tab
Important!
This replacement procedure can be used for:
SEAT Cordoba Saloon (6L2) 1.2, SEAT Cordoba Saloon (6L2) 1.2 12V … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Engine Mount for Cordoba Saloon (6L2) and other SEAT models
How to change Engine mount on Seat Cordoba 6L2 1.9 TDI – step-by-step instructions for straightforward car repair Engine mount
How to change Engine mount on Córdoba II Saloon (6L2) – tips for proper car maintenance
Engine mount for Córdoba II Saloon (6L2) Petrol (64 hp)
Simple DIY car repair steps – Replacing Engine mount on Córdoba II Saloon (6L2)
Engine mount for Córdoba II Saloon (6L2) Petrol (70 hp)
Tools
Replacement: engine mounts – SEAT CORDOBA (6L2). List of the tools you'll need:
Wire brush
WD-40 spray
Copper grease
Drive socket # 12
Drive socket # 16
Ratchet wrench
Torque wrench
Phillips screwdriver
Fender cover
Buy tools
Replacement: engine mounts – SEAT CORDOBA (6L2). AUTODOC recommends:
  • All work should be done with the engine stopped.
Replacement: engine mounts – SEAT CORDOBA (6L2). Use the following procedure:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    Lift the car using a jack or place it over an inspection pit.
    Replacement: engine mounts – SEAT CORDOBA (6L2). Tip:
    The vehicle must be on even keel, and if it is at an angle, the drain plug must be at the lowest point.
    Step 4
    How to change Engine Mount on Seat Cordoba 6L2 2002 - free PDF and video manuals
    Unscrew the fasteners of the lower sound insulation. Use a drive socket #12. Use a Phillips screwdriver.
  2. Step 5
    How to replace SEAT Cordoba Saloon (6L2) 1.9 TDI 2003 Engine Mount - step-by-step manuals and video guides
    Remove the lower sound insulation.
  3. Step 6
    Seat Cordoba 6L2 1.4 16V 2004 Engine Mount replacement: free workshop manuals
    Clean the engine mount fasteners. Use a wire brush. Use WD-40 spray.
  4. Step 7
    Changing Engine Mount on SEAT Cordoba Saloon (6L2) 1.4 TDI 2005 by yourself
    Unscrew the fastener connecting the engine mount to the gearbox housing. Use a drive socket #16. Use a ratchet wrench.
  5. Step 8
    How to remove SEAT CORDOBA 1.6 2006 Engine Mount - online easy-to-follow instructions
    Unscrew the engine mount fastener that connects it to the subframe. Use a drive socket #16. Use a ratchet wrench.
  6. Step 9
    How to replace Engine Mount on SEAT Cordoba Saloon (6L2) 2007: download PDF manuals and video instructions
    Remove the engine mount.
    Replacement: engine mounts – SEAT CORDOBA (6L2). AUTODOC experts recommend:
    Carefully check the other engine mounts and replace them if necessary.
  7. Step 10
    How hard is it to do yourself: Engine Mount replacement on Seat Cordoba 6L2 1.4 16V 2008 - download illustrated guide
    Install the engine mount to its mounting seat.
  8. Step 11
    Need to know how to renew Engine Mount on SEAT CORDOBA 2009? This free workshop manual will help you to do it yourself
    Screw in the engine mount fastener that connects it to the subframe. Use a drive socket #16.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the SEAT Córdoba II Saloon (6L2) model.

Browse tyres

Popular maintenance tutorials for Seat Cordoba 6L2

More manuals for Seat Cordoba 6L2

Complete guides for changing the Engine mounts on different SEAT CORDOBA models

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
SEAT Cordoba Saloon (6L2) Engine Mount replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY SEAT Cordoba Saloon (6L2) Engine Mount replacement - online guide
Tips & tricks for your SEAT Cordoba Saloon (6L2)
View more
  • How to change Engine mounts on SEAT Cordoba Saloon (6L2) 1.9 SDI - replacement tricks
    Coolant comparison test | AUTODOC
    11K views
    Published on: 18/02/2021
  • Changing Engine mounting Seat Cordoba 6L2 1.9 TDI - Replacement Tips
    What to do if your car heater isn't working | AUTODOC tips
    4K views
    Published on: 11/02/2021
  • Maintenance Hacks - SEAT Cordoba Saloon (6L2) 1.4 16V Motor mounts replacement guide
    How to detect vacuum leaks using a smoke machine | AUTODOC
    19K views
    Published on: 23/07/2020
  • Replace Motor mount on Seat Cordoba 6L2 - free video tips
    How to paint a car with a spray can | AUTODOC tips
    5K views
    Published on: 25/03/2021

Most commonly replaced car parts on SEAT CORDOBA

Professional manuals for the most common SEAT models