Disclaimer
How to change rear brake pads on MERCEDES-BENZ VITO / MIXTO Box (W639) – replacement guide
downloads:
5
Views:
103
Recommended replacement interval for the part category Brake pad set : 30000 km
Important!
This replacement procedure can be used for:
MERCEDES-BENZ VITO / MIXTO Box (W639) 110 CDI (639.601, 639.603, 639.605), MERCEDES-BENZ VITO / MIXTO Box (W639) 113 CDI (639.601, 639.603, 639.605), MERCEDES-BENZ VITO / MIXTO Box (W639) 116 CDI (639.601, 639.603, 639.605), MERCEDES-BENZ VITO / MIXTO Box (W639) 122 CDI (639.601, 639.603, 639.605), MERCEDES-BENZ VITO / MIXTO Box (W639) 115 CDI (639.601, 639.603, 639.605), MERCEDES-BENZ VITO / MIXTO Box (W639) 111 CDI (639.601, 639.603, 639.605), MERCEDES-BENZ VITO / MIXTO Box (W639) 119 (639.601, 639.603, 639.605), MERCEDES-BENZ VITO / MIXTO Box (W639) 122 (639.601, 639.603, 639.605), MERCEDES-BENZ VITO / MIXTO Box (W639) 109 CDI (639.601, 639.603, 639.605), MERCEDES-BENZ VITO / MIXTO Box (W639) 111 CDI (639.601, 639.603), MERCEDES-BENZ VITO / MIXTO Box (W639) 120 CDI (639.601, 639.603, 639.605), MERCEDES-BENZ VITO / MIXTO Box (W639) 111 CDI 4x4 (639.601, 639.603, 639.605), MERCEDES-BENZ VITO / MIXTO Box (W639) 115 CDI 4x4 (639.601, 639.603, 639.605), MERCEDES-BENZ VITO / MIXTO Box (W639) 126 (639.601, 639.603, 639.605), MERCEDES-BENZ VITO / MIXTO Box (W639) 109 CDI (639.601, 639.603, 639.605), MERCEDES-BENZ VITO / MIXTO Box (W639) 123 (639.601), MERCEDES-BENZ VITO / MIXTO Box (W639) 123 (639.601, 639.603, 639.605), MERCEDES-BENZ VITO / MIXTO Box (W639) 113 CDI 4x4 (639.601, 639.603, 639.605), MERCEDES-BENZ VITO / MIXTO Box (W639) 116 CDI 4x4 (639.601, 639.603, 639.605), MERCEDES-BENZ VITO / MIXTO Box (W639) E-CELL (639.601, 639.603, 639.605) … View more
The steps may slightly vary depending on the car design.
MERCEDES-BENZ VITO / MIXTO Box (W639) 110 CDI (639.601, 639.603, 639.605), MERCEDES-BENZ VITO / MIXTO Box (W639) 113 CDI (639.601, 639.603, 639.605), MERCEDES-BENZ VITO / MIXTO Box (W639) 116 CDI (639.601, 639.603, 639.605), MERCEDES-BENZ VITO / MIXTO Box (W639) 122 CDI (639.601, 639.603, 639.605), MERCEDES-BENZ VITO / MIXTO Box (W639) 115 CDI (639.601, 639.603, 639.605), MERCEDES-BENZ VITO / MIXTO Box (W639) 111 CDI (639.601, 639.603, 639.605), MERCEDES-BENZ VITO / MIXTO Box (W639) 119 (639.601, 639.603, 639.605), MERCEDES-BENZ VITO / MIXTO Box (W639) 122 (639.601, 639.603, 639.605), MERCEDES-BENZ VITO / MIXTO Box (W639) 109 CDI (639.601, 639.603, 639.605), MERCEDES-BENZ VITO / MIXTO Box (W639) 111 CDI (639.601, 639.603), MERCEDES-BENZ VITO / MIXTO Box (W639) 120 CDI (639.601, 639.603, 639.605), MERCEDES-BENZ VITO / MIXTO Box (W639) 111 CDI 4x4 (639.601, 639.603, 639.605), MERCEDES-BENZ VITO / MIXTO Box (W639) 115 CDI 4x4 (639.601, 639.603, 639.605), MERCEDES-BENZ VITO / MIXTO Box (W639) 126 (639.601, 639.603, 639.605), MERCEDES-BENZ VITO / MIXTO Box (W639) 109 CDI (639.601, 639.603, 639.605), MERCEDES-BENZ VITO / MIXTO Box (W639) 123 (639.601), MERCEDES-BENZ VITO / MIXTO Box (W639) 123 (639.601, 639.603, 639.605), MERCEDES-BENZ VITO / MIXTO Box (W639) 113 CDI 4x4 (639.601, 639.603, 639.605), MERCEDES-BENZ VITO / MIXTO Box (W639) 116 CDI 4x4 (639.601, 639.603, 639.605), MERCEDES-BENZ VITO / MIXTO Box (W639) E-CELL (639.601, 639.603, 639.605) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Brake Pads for VITO / MIXTO Box (W639) and other MERCEDES-BENZ models
Alternative products

Wire brush
Nylon cleaning brush
WD-40 spray
Brake cleaner
Anti-squeal paste
Copper grease
Torque wrench
Drive socket # 12
Wheel impact socket #17
Brake caliper wind back tool
Ratchet wrench
Crow bar
Wheel chock
Replacement: brake pads – MERCEDES-BENZ VITO / MIXTO Box (W639). AUTODOC experts recommend:
- Perform the replacement of brake pads in complete set for each axis. This provides effective braking.
- The replacement procedure is identical for all brake pads on the same axle.
- All work should be done with the engine stopped.
Replacement: brake pads – MERCEDES-BENZ VITO / MIXTO Box (W639). Use the following procedure:
- Step 1Open the bonnet. Unscrew the brake fluid reservoir cap.Step 2
Secure the wheels with chocks. - Step 3
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 4
Raise the rear of the car and secure on supports. - Step 5
Unscrew the wheel bolts.Replacement: brake pads – MERCEDES-BENZ VITO / MIXTO Box (W639). Tip:To avoid injury, hold up the wheel when unscrewing the bolts. - Step 6
Remove the wheel. - Step 7
Clean the brake caliper fasteners. Use a wire brush. Use WD-40 spray. - Step 8
Unscrew the brake caliper fastening. Use a drive socket #12. Use a ratchet wrench. - Step 9
Spread the brake pads. Use a crowbar. - Step 10Remove the guide pins from the brake caliper.Step 11
Remove the brake caliper.Replacement: brake pads – MERCEDES-BENZ VITO / MIXTO Box (W639). AUTODOC recommends:Tie the caliper to the suspension or to the body with a wire without disconnecting from the brake hose to prevent depressurization of the brake system.Make sure that the brake caliper is not hanging on the brake hose.Don't press the brake pedal after the brake caliper has been removed. As a result, the piston can fall out from the brake cylinder, and brake fluid leakage and depressurization of the system may occur. Check the brake caliper bracket, brake caliper guide pins and boots. Clean them. Replace, if necessary. - Step 12
Remove the brake pads.Replacement: brake pads – MERCEDES-BENZ VITO / MIXTO Box (W639). AUTODOC experts recommend:Measure the brake disc thickness. Upon reaching the wear limit the part must be replaced. - Step 13
Clean the brake caliper bracket from dirt and dust. Use a wire brush. Use a brake cleaner.AUTODOC recommends:Replacement: brake pads – MERCEDES-BENZ VITO / MIXTO Box (W639). After applying the spray, wait a few minutes. - Step 14
Treat the brake pads in the area where their surface comes into contact with the brake caliper bracket. Use anti-squeal paste.AUTODOC recommends:Make sure the disc surface is clean before installing the pads. - Step 15
Install new brake pads.Replacement: brake pads – MERCEDES-BENZ VITO / MIXTO Box (W639). Professionals recommend:Make sure the pads are installed with linings facing the disc. - Step 16
Treat the brake caliper piston. Use a nylon cleaning brush. Use a brake cleaner.Replacement: brake pads – MERCEDES-BENZ VITO / MIXTO Box (W639). Tip from AUTODOC:After applying the spray, wait a few minutes.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the MERCEDES-BENZ Vito Mixto (W639) model
Popular maintenance tutorials for Mercedes Vito Mixto W639
Complete guides for changing the Brake pad set on different MERCEDES-BENZ VITO models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your MERCEDES-BENZ VITO / MIXTO Box (W639)
View more
Petrol or diesel: The engine showdown! | AUTODOC
What to do if your car’s bonnet won’t open | AUTODOC tips
How to Polish Your Car Yourself and Save Money on Garage Services | AUTODOC tips
DIY rear axle restoration | Drivetrain restoration – Part 2
Most commonly replaced car parts on MERCEDES-BENZ VITO
Time to replace parts? Get even better deals in our Shop app.

SCAN ME































