Important!
This replacement procedure can be used for:
MERCEDES-BENZ E-Class T-modell (S124) E 300 TD (124.191), MERCEDES-BENZ E-Class T-modell (S124) E 200 T (124.079), MERCEDES-BENZ E-Class T-modell (S124) E 220 T (124.082), MERCEDES-BENZ E-Class T-modell (S124) E 280 T (124.088), MERCEDES-BENZ E-Class T-modell (S124) E 320 T (124.092), MERCEDES-BENZ E-Class T-modell (S124) E 250 TD (124.186), MERCEDES-BENZ E-Class T-modell (S124) E 280 T (124.088), MERCEDES-BENZ E-Class T-modell (S124) E 36 T AMG (124.092), MERCEDES-BENZ E-Class T-modell (S124) E 300 T Turbo-D (124.193), MERCEDES-BENZ E-Class T-modell (S124) E 300 T 4-matic (124.290), MERCEDES-BENZ E-Class T-modell (S124) E 300 T Turbo-D 4-matic (124.393), MERCEDES-BENZ E-Class T-modell (S124) E 250 Turbo D View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Anti Roll Bar Links for E-Class T-modell (S124) and other MERCEDES-BENZ models
Alternative products
How to change Anti-roll bar link on Mercedes S124 E 250 2.5 Turbo Diesel (124.186) – step-by-step instructions for straightforward car repair Anti-roll bar link
Tools
Replacement: anti roll bar links – MERCEDES-BENZ E-CLASS Estate (S124). List of the tools you'll need:
Wire brush
WD-40 spray
Copper grease
Drive socket # 10
Drive socket # 13
Drive socket # 17
Combination spanner #13
Combination spanner #17
Combination spanner #19
Wheel impact socket #17
Ratchet wrench
Torque wrench
Flat chisel
Crow bar
Rubber mallet
Wheel chock
Replacement: anti roll bar links – MERCEDES-BENZ E-CLASS Estate (S124). Tip from AUTODOC experts:
  • Replace the stabiliser links on MERCEDES-BENZ E-CLASS Estate (S124) in pairs.
  • The replacement procedure is identical for both stabiliser links on the same axle.
  • All work should be done with the engine stopped.
Carry out replacement in the following order:
  1. Step 1
    How to change Anti Roll Bar Links on Mercedes S124 1993 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace MERCEDES-BENZ E-Class T-modell (S124) E 250 2.5 Turbo Diesel (124.186) 1994 Anti Roll Bar Links - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 3
    Raise the rear of the car and secure on supports.
    Step 4
    Mercedes S124 E 220 2.2 (124.082) 1995 Anti Roll Bar Links replacement: free workshop manuals
    Unscrew the wheel bolts.
    Replacement: anti roll bar links – MERCEDES-BENZ E-CLASS Estate (S124). Tip from AUTODOC:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  4. Step 5
    Changing Anti Roll Bar Links on MERCEDES-BENZ E-Class T-modell (S124) E 280 T (124.088) 1996 by yourself
    Remove the wheel.
  5. Step 6
    How to remove MERCEDES-BENZ E-CLASS E 200 2.0 (124.079) 1993 Anti Roll Bar Links - online easy-to-follow instructions
    Unscrew the fasteners of the control arm plastic cover. Use a drive socket #10. Use a ratchet wrench.
  6. Step 7
    How to replace Anti Roll Bar Links on MERCEDES-BENZ E-Class T-modell (S124) 1994: download PDF manuals and video instructions
    Remove the control arm plastic cover.
  7. Step 8
    How hard is it to do yourself: Anti Roll Bar Links replacement on Mercedes S124 E 300 3.0 Turbo Diesel (124.193) 1995 - download illustrated guide
    Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
  8. Step 9
    Need to know how to renew Anti Roll Bar Links on MERCEDES-BENZ E-CLASS 1996? This free workshop manual will help you to do it yourself
    Disconnect the transverse stabilizer fastener from the link. Use a combination spanner #17. Use a combination spanner #19.
  9. Step 10
    Changing of Anti Roll Bar Links on Mercedes S124 1993 won't be an issue if you follow this illustrated step-by-step guide
    Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #13 (2 pieces).
  10. Step 11
    MERCEDES-BENZ E-CLASS E 280 2.8 (124.088) Anti Roll Bar Links replacement: online guides and video tutorials
    Remove the stabilizer rod.
  11. Step 12
    Replacing Anti Roll Bar Links on Mercedes S124 1995 E 250 2.5 Turbo Diesel (124.186) by yourself
    Install a new rod, tighten the fasteners. Use a crowbar.
  12. Step 13
    E-Class T-modell (S124) E 200 2.0 (124.079) 1996 Anti Roll Bar Links DIY replacement workshop manual
    Align the fastener holes of the stabilizer link and the suspension control arm. Use a pin punch. Use a rubber mallet.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the MERCEDES-BENZ E-Class T-modell (S124) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY MERCEDES-BENZ E-Class T-modell (S124) Anti Roll Bar Links replacement - online guide
Tips & tricks for your MERCEDES-BENZ E-Class T-modell (S124)
View more
  • How to change Drop links on MERCEDES-BENZ E-Class T-modell (S124) E 300 3.0 Turbo Diesel (124.191) - replacement tricks
    Unveiling the secrets: Detecting vacuum leaks with a Smoke Machine | AUTODOC
  • Changing Stabilizer link Mercedes S124 E 250 2.5 Turbo Diesel (124.186) - Replacement Tips
    How to easily repair a punctured tyre | AUTODOC tips
  • Maintenance Hacks - MERCEDES-BENZ E-Class T-modell (S124) E 220 2.2 (124.082) Sway bar link replacement guide
    Transform Your Old Engine Valve Cover: Quick Polishing Tips for a Shiny Finish | AUTODOC Tips
  • Replace Drop link on Mercedes S124 - free video tips
    How to Swap an M50 Engine in a BMW E30 Turbo | AUTODOC Project
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
MERCEDES-BENZ E-Class T-modell (S124) Anti Roll Bar Links replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME