Disclaimer
How to change rear anti roll bar links on MERCEDES-BENZ E-Class Platform / Chassis (VF210) – replacement guide
downloads:
0
Views:
10
Important!
This replacement procedure can be used for:
MERCEDES-BENZ E-Class Platform / Chassis (VF210) E 280 (210.663), MERCEDES-BENZ E-Class Platform / Chassis (VF210) E 290 TD (210.617), MERCEDES-BENZ E-Class Platform / Chassis (VF210) E 270 CDI (210.616), MERCEDES-BENZ E-Class Platform / Chassis (VF210) E 250 d (210.610), MERCEDES-BENZ E-Class Platform / Chassis (VF210) E 220 CDi (210.606) … View more
The steps may slightly vary depending on the car design.
MERCEDES-BENZ E-Class Platform / Chassis (VF210) E 280 (210.663), MERCEDES-BENZ E-Class Platform / Chassis (VF210) E 290 TD (210.617), MERCEDES-BENZ E-Class Platform / Chassis (VF210) E 270 CDI (210.616), MERCEDES-BENZ E-Class Platform / Chassis (VF210) E 250 d (210.610), MERCEDES-BENZ E-Class Platform / Chassis (VF210) E 220 CDi (210.606) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for E-Class Platform / Chassis (VF210) and other MERCEDES-BENZ models
Alternative products

Wire brush
WD-40 spray
Copper grease
Drive socket # 10
Drive socket # 13
Drive socket # 17
Combination spanner #13
Combination spanner #17
Combination spanner #19
Wheel impact socket #17
Ratchet wrench
Torque wrench
Flat chisel
Crow bar
Rubber mallet
Wheel chock
Replacement: anti roll bar links – MERCEDES-BENZ E-Klasse Pritsche / Fahrgestell (VF210). Tip from AUTODOC experts:
- Replace the stabiliser links on MERCEDES-BENZ E-Klasse Pritsche / Fahrgestell (VF210) in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Carry out replacement in the following order:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3Raise the rear of the car and secure on supports.Step 4
Unscrew the wheel bolts.Replacement: anti roll bar links – MERCEDES-BENZ E-Klasse Pritsche / Fahrgestell (VF210). Tip from AUTODOC:To avoid injury, hold up the wheel when unscrewing the bolts. - Step 5
Remove the wheel. - Step 6
Unscrew the fasteners of the control arm plastic cover. Use a drive socket #10. Use a ratchet wrench. - Step 7
Remove the control arm plastic cover. - Step 8
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 9
Disconnect the transverse stabilizer fastener from the link. Use a combination spanner #17. Use a combination spanner #19. - Step 10
Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #13 (2 pieces). - Step 11
Remove the stabilizer rod. - Step 12
Install a new rod, tighten the fasteners. Use a crowbar. - Step 13
Align the fastener holes of the stabilizer link and the suspension control arm. Use a pin punch. Use a rubber mallet.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the MERCEDES-BENZ E-Class Platform / Chassis (VF210) model
Popular maintenance tutorials for MERCEDES-BENZ E-Klasse Pritsche / Fahrgestell (VF210)
Complete guides for changing the Drop links on different MERCEDES-BENZ E-CLASS models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your MERCEDES-BENZ E-Class Platform / Chassis (VF210)
View more
TOP 5 mistakes during DIY oil change | AUTODOC tips
How to replace a timing chain yourself
Discover the 4 Key Reasons Your CHECK ENGINE Light Could Be On | AUTODOC Tips
Stop Rust Before It Starts: Top 5 Tips for Car Body Protection | AUTODOC Insights
Most commonly replaced car parts on MERCEDES-BENZ E-CLASS
Time to replace parts? Get even better deals in our Shop app.

SCAN ME


























