Important!
This replacement procedure can be used for:
AUDI A6 Allroad (4GH, 4GJ, C7) 3.0 TDI quattro, AUDI A6 Allroad (4GH, 4GJ, C7) 3.0 TFSI quattro, AUDI A6 Allroad (4GH, 4GJ, C7) 3.0 TDI quattro, AUDI A6 Allroad (4GH, 4GJ, C7) 3.0 TDI quattro, AUDI A6 Allroad (4GH, 4GJ, C7) 3.0 TDI quattro, AUDI A6 Allroad (4GH, 4GJ, C7) 3.0 TDI quattro, AUDI A6 Allroad (4GH, 4GJ, C7) 3.0 TDI quattro, AUDI A6 Allroad (4GH, 4GJ, C7) 3.0 TDI quattro, AUDI A6 Allroad (4GH, 4GJ, C7) 3.0 TDI quattro, AUDI A6 Allroad (4GH, 4GJ, C7) 3.0 TFSI quattro View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Anti Roll Bar Links for A6 Allroad (4GH, 4GJ, C7) and other AUDI models
Tools
Replacement: anti roll bar links – AUDI A6 Allroad (4GH, 4GJ). Tools you need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #16
Drive socket # 16
Wheel impact socket #17
Ratchet wrench
Torque wrench
Hydraulic transmission jack
Wheel chock
Replacement: anti roll bar links – AUDI A6 Allroad (4GH, 4GJ). AUTODOC experts recommend:
  • Replace the stabiliser links on AUDI A6 Allroad (4GH, 4GJ) in pairs.
  • The replacement procedure is identical for both stabiliser links on the same axle.
  • All work should be done with the engine stopped.
Replacement: anti roll bar links – AUDI A6 Allroad (4GH, 4GJ). Use the following procedure:
  1. Step 1
    How to change Anti Roll Bar Links on AUDI A6 Allroad 2012 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace AUDI A6 Allroad (4GH, 4GJ, C7) 3.0 TDI quattro 2013 Anti Roll Bar Links - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 3
    Raise the rear of the car and secure on supports.
    Step 4
    AUDI A6 Allroad 3.0 TFSI quattro 2014 Anti Roll Bar Links replacement: free workshop manuals
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Important! Hold the wheel while unscrewing the fastening bolts. AUDI A6 Allroad (4GH, 4GJ)
  4. Step 5
    Changing Anti Roll Bar Links on AUDI A6 Allroad (4GH, 4GJ, C7) 3.0 TFSI quattro 2015 by yourself
    Remove the wheel.
  5. Step 6
    How to remove AUDI A6 3.0 TDI quattro 2016 Anti Roll Bar Links - online easy-to-follow instructions
    Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
  6. Step 7
    How to replace Anti Roll Bar Links on AUDI A6 Allroad (4GH, 4GJ, C7) 2017: download PDF manuals and video instructions
    Unscrew the fastener connecting the stabilizer bar with the control arm. Use a drive socket #16. Use a ratchet wrench.
  7. Step 8
    How hard is it to do yourself: Anti Roll Bar Links replacement on AUDI A6 Allroad 3.0 TDI quattro 2018 - download illustrated guide
    Unscrew the fasteners connecting the stabiliser link to the stabiliser bar. Use a combination spanner #16 (2 pieces).
  8. Step 9
    Need to know how to renew Anti Roll Bar Links on AUDI A6 2012? This free workshop manual will help you to do it yourself
    Remove the stabilizer rod.
    Replacement: anti roll bar links – AUDI A6 Allroad (4GH, 4GJ). Tip:
    Examine stabiliser bushes. Replace them if needed.
  9. Step 10
    Changing of Anti Roll Bar Links on AUDI A6 Allroad 2013 won't be an issue if you follow this illustrated step-by-step guide
    Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
  10. Step 11
    AUDI A6 3.0 TDI quattro Anti Roll Bar Links replacement: online guides and video tutorials
    Install a new rod, tighten the fasteners. Use a combination spanner #16 (2 pieces). Use a drive socket #16. Use a ratchet wrench.
  11. Step 12
    Replacing Anti Roll Bar Links on AUDI A6 Allroad 2015 3.0 TDI quattro by yourself
    Support the arm. Use a hydraulic transmission jack.
  12. Step 13
    A6 Allroad (4GH, 4GJ, C7) 3.0 TDI quattro 2016 Anti Roll Bar Links DIY replacement workshop manual
    Tighten the fastener connecting the stabilizer bar with the control arm. Use a combination spanner #16. Use a drive socket #16. Use a torque wrench. Tighten it to 40 Nm torque.+90°
    AUTODOC recommends:
    Important! Be sure to use new fasteners.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the AUDI A6 C7 Allroad (4GH, 4GJ) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
AUDI A6 Allroad (4GH, 4GJ, C7) Anti Roll Bar Links replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY AUDI A6 Allroad (4GH, 4GJ, C7) Anti Roll Bar Links replacement - online guide
Tips & tricks for your AUDI A6 Allroad (4GH, 4GJ, C7)
View more
  • How to change Drop links on AUDI A6 Allroad (4GH, 4GJ, C7) 3.0 TDI quattro - replacement tricks
    How to wash your car in winter | AUTODOC tips
  • Changing Stabilizer link AUDI A6 Allroad 3.0 TDI quattro - Replacement Tips
    How to find and change a fuse | AUTODOC
  • Maintenance Hacks - AUDI A6 Allroad (4GH, 4GJ, C7) 3.0 TFSI quattro Sway bar link replacement guide
    How to restore a steering wheel | AUTODOC tips
  • Replace Drop link on AUDI A6 Allroad - free video tips
    How to repair a chipped or cracked windscreen | AUTODOC tips

Professional manuals for the most common AUDI models