Disclaimer
How to change pollen filter on OPEL Adam (M13) – replacement guide
downloads:
12
Views:
401
Recommended replacement interval for the part category Pollen filter : 2 year / 60000 km
Important!
This replacement procedure can be used for:
OPEL Adam (M13) 1.4 LPG, OPEL Adam (M13) 1.2, OPEL Adam (M13) 1.4, OPEL Adam (M13) 1.4, OPEL Adam (M13) 1.0, OPEL Adam (M13) 1.0, OPEL Adam (M13) 1.4 S … View more
The steps may slightly vary depending on the car design.
OPEL Adam (M13) 1.4 LPG, OPEL Adam (M13) 1.2, OPEL Adam (M13) 1.4, OPEL Adam (M13) 1.4, OPEL Adam (M13) 1.0, OPEL Adam (M13) 1.0, OPEL Adam (M13) 1.4 S … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Pollen Filter for Adam (M13) and other OPEL models
Alternative products

Torx screwdriver T20
Clip removal tool
Microfibre towel
Replacement: pollen filter – OPEL ADAM. Professionals recommend:
- Replace the cabin filter at least once every six months, in early spring and autumn seasons.
- Follow the terms, recommendations and requirements of the part operation provided by the manufacturer.
- If the air flow into the cabin has sharply reduced, replace the filter before a scheduled maintenance.
- Please note: all work on the car – OPEL ADAM – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1
Move the passenger seat fully backwards. - Step 2
Spread a cloth under the cabin filter cover to protect the interior upholstery from getting dirty. - Step 3
Unscrew the fasteners of the bottom trim panel. Use Torx T20. - Step 4
Remove the bottom cover of the glove box. - Step 5
Unscrew the glove box fastening screws. Use Torx T20. - Step 6
Open the glove box. - Step 7
Unscrew the glove box fastening screws. Use Torx T20. - Step 8
Unplug the glove box light connector. - Step 9
Remove the glovebox.Replacement: pollen filter – OPEL ADAM. AUTODOC recommends:Be careful to avoid damaging the glove compartment fasteners. - Step 10
Remove the fasteners of the air duct housing. Use a clip removal tool. - Step 11
Remove the air distribution housing assembly. - Step 12
Remove the cabin filter housing cover - Step 13
Remove the filter element from the filter housingReplacement: pollen filter – OPEL ADAM. Tip from AUTODOC:Do not attempt to clean and reuse the filter - it will affect the quality of air cleaning inside the car. - Step 14
Insert a new filter element into the filter housing. Make sure that the filter edge fits tight to the housing.AUTODOC recommends:Check out the correct location of the filter element. Do not skew.Follow the air flow direction arrow on the filter.OPEL ADAM – It's important to only use high-quality filters. - Step 15
Reinstall the cabin filter housing cover Make sure you hear a click indicating that it is locked in place.Replacement: pollen filter – OPEL ADAM. Tip from AUTODOC experts:Do not apply excessive force when installing the part. Otherwise you may damage the fasteners. - Step 16
Reinstall the air distribution housing assembly. - Step 17
Install the air duct housing fasteners.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the OPEL Adam (M13) model
Popular maintenance tutorials for Opel Adam M13
Complete guides for changing the Pollen filter on different OPEL ADAM models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your OPEL Adam (M13)
View more
How to inspect and troubleshoot your car heater when it’s not working
Top 5 Mistakes to Avoid for Safe Engine Bay Repairs | AUTODOC Tips
Regain Your Confidence on the Road: Easy Headlight Restoration Tips
How to Fix P0401 ✅ error code Insufficient EGR flow
Most commonly replaced car parts on OPEL ADAM
Time to replace parts? Get even better deals in our Shop app.

SCAN ME

















