Disclaimer
How to change pollen filter on FORD TRANSIT CONNECT (P65_, P70_, P80_) – replacement guide
downloads:
18
Views:
1074
Recommended replacement interval for the part category Pollen filter : 2 year / 50000 km
Important!
This replacement procedure can be used for:
FORD TRANSIT CONNECT (P65_, P70_, P80_) 1.8 TDCi, FORD TRANSIT CONNECT (P65_, P70_, P80_) 1.8 TDCi, FORD TRANSIT CONNECT (P65_, P70_, P80_) 1.8 Di, FORD TRANSIT CONNECT (P65_, P70_, P80_) 1.8 16V, FORD TRANSIT CONNECT (P65_, P70_, P80_) 1.8 16V LPG … View more
The steps may slightly vary depending on the car design.
FORD TRANSIT CONNECT (P65_, P70_, P80_) 1.8 TDCi, FORD TRANSIT CONNECT (P65_, P70_, P80_) 1.8 TDCi, FORD TRANSIT CONNECT (P65_, P70_, P80_) 1.8 Di, FORD TRANSIT CONNECT (P65_, P70_, P80_) 1.8 16V, FORD TRANSIT CONNECT (P65_, P70_, P80_) 1.8 16V LPG … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Pollen Filter for TRANSIT CONNECT (P65_, P70_, P80_) and other FORD models
Alternative products

Phillips Screwdriver
Microfibre towel
Fender cover
Replacement: pollen filter – FORD TRANSIT CONNECT (P65_, P70_, P80_). AUTODOC experts recommend:
- Replace the cabin filter at least once every six months, in early spring and autumn seasons.
- Follow the terms, recommendations and requirements of the part operation provided by the manufacturer.
- If the air flow into the cabin has sharply reduced, replace the filter before a scheduled maintenance.
- Please note: all work on the car – FORD TRANSIT CONNECT (P65_, P70_, P80_) – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1Open the bonnet.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3
Unscrew the fastener of the wiper cowl grille located on the right side. Use a Phillips screwdriver. - Step 4
Remove the wiper cowl grille located on the right side. - Step 5
Remove the cabin filter.Replacement: pollen filter – FORD TRANSIT CONNECT (P65_, P70_, P80_). Tip:Do not attempt to clean and reuse the filter - it will affect the quality of air cleaning inside the car. - Step 6Switch on the ignition.Step 7Close the heater flap.Step 8Switch off the ignition.Step 9
Clean the cabin filter housing and cover.Replacement: pollen filter – FORD TRANSIT CONNECT (P65_, P70_, P80_). Professionals recommend:Remove any debris from the cabin filter housing carefully to prevent contamination of the ventilation duct. - Step 10
Install the cabin filter to its mounting seat.Replacement: pollen filter – FORD TRANSIT CONNECT (P65_, P70_, P80_). AUTODOC experts recommend:Follow the air flow direction arrow on the filter.Check out the correct location of the filter element. Do not skew.Attention! Use quality filters – FORD TRANSIT CONNECT (P65_, P70_, P80_).
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the FORD Transit Connect Mk1 Van model
Popular maintenance tutorials for Ford Transit Connect mk1
Complete guides for changing the Pollen filter on different FORD TRANSIT CONNECT models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your FORD TRANSIT CONNECT (P65_, P70_, P80_)
View more
K2 ROTON wheel cleaner overview
How to repair a bumper yourself | AUTODOC tips
How to Safely Wash Your Car in Winter Without Damage | AUTODOC tips
Checking the starter without removing it | AUTODOC tips
Most commonly replaced car parts on FORD TRANSIT CONNECT
Time to replace parts? Get even better deals in our Shop app.

SCAN ME



















