How to change pollen filter on AUDI A1 Citycarver (GBH) – replacement guide
downloads:
1
Views:
49
0
Users voted – 0
Recommended replacement interval for the part category Pollen filter : 15000km
Important!
This replacement procedure can be used for:
AUDI A1 Citycarver (GBH) 30 TFSI,
AUDI A1 Citycarver (GBH) 35 TFSI,
AUDI A1 Citycarver (GBH) 30 TFSI,
AUDI A1 Citycarver (GBH) 25 TFSI
…
View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Pollen Filter for A1 Citycarver (GBH) and other AUDI models
Replacement: pollen filter – AUDI A1 Citycarver (GBH). AUTODOC recommends:
Replace the cabin filter at least once every six months, in early spring and autumn seasons.
Follow the terms, recommendations and requirements of the part operation provided by the manufacturer.
If the air flow into the cabin has sharply reduced, replace the filter before a scheduled maintenance.
All work should be done with the engine stopped.
Replacement: pollen filter – AUDI A1 Citycarver (GBH). Take the following steps:
Step 1
Move the passenger seat fully backwards.
Step 2
Remove the bottom cover of the glove box.
Step 3
Release the cabin filter cover clips.
Step 4
Remove the cabin filter housing cover
Step 5
Remove the filter element from the filter housing
AUTODOC recommends:
Do not attempt to clean and reuse the filter - it will affect the quality of air cleaning inside the car.
Step 6
Insert a new filter element into the filter housing. Make sure that the filter edge fits tight to the housing.
AUTODOC recommends:
Check out the correct location of the filter element. Do not skew.Follow the air flow direction arrow on the filter.AUDI A1 Citycarver (GBH) – It's important to only use high-quality filters.
Step 7
Reinstall the cabin filter housing cover
Step 8
Attach the cabin filter cover clips.
Step 9
Install the glove box bottom cover.
Replacement: pollen filter – AUDI A1 Citycarver (GBH). Tip:
Do not apply excessive force when installing the part. Otherwise you may damage the fasteners.
Step 10
Return the passenger seat to its initial position.
Step 11
Switch on the ignition.
Step 12
Switch on the air conditioning system. This is necessary in order to make sure that the component operates properly.
Step 13
Switch off the ignition.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the AUDI A1 Citycarver (GBH) model