Disclaimer
How to change mass air flow sensor on MERCEDES-BENZ S-Class Saloon (W220) – replacement guide
downloads:
13
Views:
248
Important!
This replacement procedure can be used for:
MERCEDES-BENZ S-Class Saloon (W220) S 280 (220.063, 220.163), MERCEDES-BENZ S-Class Saloon (W220) S 320 (220.065, 220.165) … View more
The steps may slightly vary depending on the car design.
MERCEDES-BENZ S-Class Saloon (W220) S 280 (220.063, 220.163), MERCEDES-BENZ S-Class Saloon (W220) S 320 (220.065, 220.165) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Mass Air Flow Sensor for S-Class Saloon (W220) and other MERCEDES-BENZ models
Alternative products

Electronic spray
Crow bar
Microfibre towel
Fender cover
Replacement: mass air flow sensor – MERCEDES-BENZ S-CLASS (W220). AUTODOC experts recommend:
- Сlear the trouble codes from the electronic control unit if necessary.
- Make sure that no dust or dirt gets into the air duct components and the throttle body.
- All work should be done with the engine stopped.
Replacement: mass air flow sensor – MERCEDES-BENZ S-CLASS (W220). Take the following steps:
- Step 1Open the bonnet.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3
Remove the engine cover.AUTODOC recommends:Replacement: mass air flow sensor – MERCEDES-BENZ S-CLASS (W220). Do not use excessive force when removing the part as this may damage it. - Step 4
Remove the air intake hoses. - Step 5
Clean the air filter cover and housing. - Step 6
Remove the air filter housing.AUTODOC recommends:Replacement: mass air flow sensor – MERCEDES-BENZ S-CLASS (W220). Do not use excessive force when removing the part as this may damage it. - Step 7
Detach the mass air flow sensor connector. - Step 8
Release the mass air flow sensor retaining clips. Use a crowbar. - Step 9
Cover the throttle body with a microfibre towel to prevent dust and dirt from getting into the system. - Step 10
Clean the mounting seat of the mass air flow sensor. - Step 11
Remove the microfibre towel from the throttle body. - Step 12
Release the mass air flow sensor retaining clips. Use a crowbar. - Step 13
Remove the mass air flow sensor. - Step 14
Install a new mass air flow sensor. Make sure you hear a click indicating that it is locked in place.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the MERCEDES-BENZ S-Class Saloon (W220) model
Popular maintenance tutorials for Mercedes W220
Complete guides for changing the MAF sensor on different MERCEDES-BENZ S-CLASS models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your MERCEDES-BENZ S-Class Saloon (W220)
View more
DIY car soundproofing | AUTODOC tips
How to tighten cylinder head bolts
Cold starts | 5 mistakes that wreck your car
Fuse Replacement Made Simple: Step-by-Step Guide | AUTODOC
Most commonly replaced car parts on MERCEDES-BENZ S-CLASS
Time to replace parts? Get even better deals in our Shop app.

SCAN ME



























