Important!
This replacement procedure can be used for:
MERCEDES-BENZ E-Class T-modell (S211) E 220 T CDI, MERCEDES-BENZ E-Class T-modell (S211) E 270 T CDI (211.216), MERCEDES-BENZ E-Class T-modell (S211) E 320 T CDI (211.226), MERCEDES-BENZ E-Class T-modell (S211) E 500 T (211.270), MERCEDES-BENZ E-Class T-modell (S211) E 280 T CDI (211.223), MERCEDES-BENZ E-Class T-modell (S211) E 320 T CDI (211.222), MERCEDES-BENZ E-Class T-modell (S211) E 280 T CDI (211.220), MERCEDES-BENZ E-Class T-modell (S211) E 220 T CDI (211.208), MERCEDES-BENZ E-Class T-modell (S211) E 500 T (211.272), MERCEDES-BENZ E-Class T-modell (S211) E 200 CDI (211.207), MERCEDES-BENZ E-Class T-modell (S211) E 270 T CDI (211.216) View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Engine Mount for E-Class T-modell (S211) and other MERCEDES-BENZ models
Tools
Replacement: engine mounts – MERCEDES-BENZ E-CLASS T-Model (S211). Tools you might need:
Wire brush
WD-40 spray
Copper grease
Torque wrench
Drive socket # 10
Drive socket # 16
Ratchet wrench
Hydraulic transmission jack
Fender cover
Replacement: engine mounts – MERCEDES-BENZ E-CLASS T-Model (S211). AUTODOC experts recommend:
  • All work should be done with the engine stopped.
Replacement: engine mounts – MERCEDES-BENZ E-CLASS T-Model (S211). Use the following procedure:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Engine Mount on Mercedes S211 2003 - free PDF and video manuals
    Clean the engine mount fasteners. Use a wire brush. Use WD-40 spray.
  2. Step 4
    How to replace MERCEDES-BENZ E-Class T-modell (S211) E 220 CDI 2.2 (211.208) 2004 Engine Mount - step-by-step manuals and video guides
    Unscrew the upper fastener of the engine mount. Use a drive socket #16. Use a ratchet wrench.
  3. Step 5
    Mercedes S211 E 220 CDI 2.2 (211.206) 2005 Engine Mount replacement: free workshop manuals
    Remove the fastening bolt.
  4. Step 6
    Lift the car using a jack or place it over an inspection pit.
    Step 7
    Changing Engine Mount on MERCEDES-BENZ E-Class T-modell (S211) E 320 CDI 3.0 (211.222) 2006 by yourself
    Undo the fasteners of the oil pan lower cover. Use a drive socket #10. Use a ratchet wrench.
  5. Step 8
    How to remove MERCEDES-BENZ E-CLASS E 280 CDI 3.0 (211.220) 2007 Engine Mount - online easy-to-follow instructions
    Remove the oil pan cover.
  6. Step 9
    How to replace Engine Mount on MERCEDES-BENZ E-Class T-modell (S211) 2008: download PDF manuals and video instructions
    Clean the engine mount fasteners. Use a wire brush. Use WD-40 spray.
  7. Step 10
    How hard is it to do yourself: Engine Mount replacement on Mercedes S211 E 200 1.8 Kompressor (211.242) 2009 - download illustrated guide
    Unscrew the lower fastener of the engine mount. Use a drive socket #16. Use a ratchet wrench.
  8. Step 11
    Need to know how to renew Engine Mount on MERCEDES-BENZ E-CLASS 2003? This free workshop manual will help you to do it yourself
    Remove the fastening bolt.
  9. Step 12
    Changing of Engine Mount on Mercedes S211 2004 won't be an issue if you follow this illustrated step-by-step guide
    Support the engine in the oil pan area. Use a hydraulic transmission jack.
  10. Step 13
    MERCEDES-BENZ E-CLASS E 200 1.8 Kompressor (211.241) Engine Mount replacement: online guides and video tutorials
    Remove the engine mount.
    Replacement: engine mounts – MERCEDES-BENZ E-CLASS T-Model (S211). Tip from AUTODOC experts:
    Carefully check the other engine mounts and replace them if necessary.
  11. Step 14
    Replacing Engine Mount on Mercedes S211 2006 E 220 CDI 2.2 (211.208) by yourself
    Clean the mounting seat of the engine mount. Use a wire brush. Use WD-40 spray.
  12. Step 15
    E-Class T-modell (S211) E 280 CDI 3.0 (211.220) 2007 Engine Mount DIY replacement workshop manual
    Install the engine mount to its mounting seat.
  13. Step 16
    How to change Engine Mount on MERCEDES-BENZ E-Class T-modell (S211) 2008 - tips and tricks
    Install the fastening bolt.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the MERCEDES-BENZ E-Class T-modell (S211) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
MERCEDES-BENZ E-Class T-modell (S211) Engine Mount replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY MERCEDES-BENZ E-Class T-modell (S211) Engine Mount replacement - online guide
Tips & tricks for your MERCEDES-BENZ E-Class T-modell (S211)
View more
  • How to change Engine mounts on MERCEDES-BENZ E-Class T-modell (S211) E 320 CDI 3.2 (211.226) - replacement tricks
    5 most common causes of oil leaks | AUTODOC tips
  • Changing Engine mounting Mercedes S211 E 220 CDI 2.2 (211.208) - Replacement Tips
    How to choose the right engine oil for your car | AUTODOC
  • Maintenance Hacks - MERCEDES-BENZ E-Class T-modell (S211) E 220 CDI 2.2 (211.206) Motor mounts replacement guide
    4 reasons why your CHECK ENGINE light is on | AUTODOC tips
  • Replace Motor mount on Mercedes S211 - free video tips
    TOP 8 mistakes car owners make | AUTODOC tips