When to replace the Lambda Sensor on your VW AMAROK
Recommended replacement interval for the part category Lambda sensor : 100000 km
Important!
This replacement procedure can be used for:
VW Amarok Pickup (2HA, 2HB, S1B, S6B, S7A, S7B) 2.0 TSI View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Lambda Sensor for Amarok Pickup (2HA, 2HB, S1B, S6B, S7A, S7B) and other VW models
Alternative products
How to change Lambda sensor on VW Amarok 2H 2.0 BiTDI 4motion – step-by-step instructions for straightforward car repair Lambda sensor
Tools
Replacement: lambda sensor – VW AMAROK (2H_, S1B). Tools you might need:
Electronic spray
High-temperature ceramic grease
Torque wrench
Drive socket # 10
22-mm oxygen sensor socket
Ratchet wrench
Thread tap
Fender cover
Replacement: lambda sensor – VW AMAROK (2H_, S1B). AUTODOC experts recommend:
  • After replacing the oxygen sensor, clear the trouble code from the electronic control unit and let the ECU adapt itself to the new sensor.
  • Before getting down to work, start the engine and let it warm up to operating temperature.
  • Please note: all work on the car – VW AMAROK (2H_, S1B) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    Lift the car using a jack or place it over an inspection pit.
    Step 4
    How to change Lambda Sensor on VW Amarok 2H 2010 - free PDF and video manuals
    Unscrew the fasteners of the oxygen sensor housing cover. Use a drive socket #10. Use a ratchet wrench.
  2. Step 5
    How to replace VW Amarok Pickup (2HA, 2HB, S1B, S6B, S7A, S7B) 2.0 BiTDI 4motion 2011 Lambda Sensor - step-by-step manuals and video guides
    Remove the oxygen sensor housing cover.
  3. Step 6
    VW Amarok 2H 2.0 BiTDI 2012 Lambda Sensor replacement: free workshop manuals
    Detach the oxygen sensor connector.
  4. Step 7
    Changing Lambda Sensor on VW Amarok Pickup (2HA, 2HB, S1B, S6B, S7A, S7B) 2.0 TDI 4motion 2013 by yourself
    Unscrew the oxygen sensor fastener. Use a 22-mm oxygen sensor socket. Use a ratchet wrench.
  5. Step 8
    How to remove VW AMAROK 2.0 TDI 2014 Lambda Sensor - online easy-to-follow instructions
    Remove the oxygen sensor.
  6. Step 9
    How to replace Lambda Sensor on VW Amarok Pickup (2HA, 2HB, S1B, S6B, S7A, S7B) 2015: download PDF manuals and video instructions
    Cut the thread for the new oxygen sensor. Use a thread tap. Use a ratchet wrench.
  7. Step 10
    Treat the oxygen sensor. Use high-temperature ceramic grease.
    Step 11
    How hard is it to do yourself: Lambda Sensor replacement on VW Amarok 2H 2.0 BiTDI 2016 - download illustrated guide
    Install the new oxygen sensor.
  8. Step 12
    Need to know how to renew Lambda Sensor on VW AMAROK 2017? This free workshop manual will help you to do it yourself
    Tighten the oxygen sensor fastener. Use a 22-mm oxygen sensor socket. Use a torque wrench. Tighten it to 37 Nm torque.
Comments – 1
  • @user_2012264
    18.11.2023 13:49
    Member
    Thanks
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 2
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the VW Amarok Pickup (2HA, 2HB, S1B, S6B, S7A, S7B) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY VW Amarok Pickup (2HA, 2HB, S1B, S6B, S7A, S7B) Lambda Sensor replacement - online guide
Tips & tricks for your VW Amarok Pickup (2HA, 2HB, S1B, S6B, S7A, S7B)
View more
  • How to change Oxygen sensor on VW Amarok Pickup (2HA, 2HB, S1B, S6B, S7A, S7B) 3.0 TDI 4motion - replacement tricks
    How to repair a bumper yourself | AUTODOC tips
  • Changing O2 sensor VW Amarok 2H 2.0 BiTDI 4motion - Replacement Tips
    Checking the starter without removing it | AUTODOC tips
  • Maintenance Hacks - VW Amarok Pickup (2HA, 2HB, S1B, S6B, S7A, S7B) 2.0 BiTDI NOx sensor replacement guide
    K2 ROTON wheel cleaner overview
  • Replace Lambda sensors on VW Amarok 2H - free video tips
    #TPMS Explained: Why Your Light is On and How to Respond Safely
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
VW Amarok Pickup (2HA, 2HB, S1B, S6B, S7A, S7B) Lambda Sensor replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME