How to carry out replacement: Lambda Sensor 2.0 HDi 120 PEUGEOT EXPERT Platform/Chassis
Disclaimer
Change PEUGEOT EXPERT Platform/Chassis 1.6 HDi 90 16V Lambda Sensor yourself – manuals and video tutorials

How to change lambda sensor on PEUGEOT EXPERT Platform/Chassis – replacement guide

downloads: 7
Views: 131
Download your free tutorial and fix PEUGEOT EXPERT Platform/Chassis 2.0 HDi 120 problems yourself Download for free 849.92 KB Lambda Sensor for PEUGEOT EXPERT Platform/Chassis Shop now
Leave a comment Open in a new tab
When to replace the Lambda Sensor on your PEUGEOT EXPERT
Recommended replacement interval for the part category Lambda sensor : 100000 km
Important!
This replacement procedure can be used for:
PEUGEOT EXPERT Platform/Chassis 2.0 16V (X_RFH) … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Lambda Sensor for EXPERT Platform/Chassis and other PEUGEOT models
How to change Lambda sensor on PEUGEOT EXPERT Platform/Chassis 2.0 HDi 120 – step-by-step instructions for straightforward car repair Lambda sensor
How to change Lambda sensor on Expert II Platform/Chassis – tips for proper car maintenance
Lambda sensor for Expert II Platform/Chassis Petrol (140 hp)
Tools
Replacement: lambda sensor – PEUGEOT EXPERT Platform/Chassis. Tools you might need:
Wire brush
WD-40 spray
Electronic spray
Copper grease
Torque wrench
Combination spanner #22
22-mm oxygen sensor socket
Ratchet wrench
Thread tap
Fender cover
Buy tools
Replacement: lambda sensor – PEUGEOT EXPERT Platform/Chassis. AUTODOC experts recommend:
  • After replacing the oxygen sensor, clear the trouble code from the electronic control unit and let the ECU adapt itself to the new sensor.
  • Before getting down to work, start the engine and let it warm up to operating temperature.
  • Please note: all work on the car – PEUGEOT EXPERT Platform/Chassis – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Lambda Sensor on PEUGEOT EXPERT Platform/Chassis 2007 - free PDF and video manuals
    Detach the oxygen sensor connector.
  2. Step 4
    How to replace PEUGEOT EXPERT Platform/Chassis 2.0 HDi 120 2008 Lambda Sensor - step-by-step manuals and video guides
    Clean the oxygen sensor fastener. Use a wire brush. Use WD-40 spray.
  3. Step 5
    PEUGEOT EXPERT Platform/Chassis 1.6 HDi 90 16V 2009 Lambda Sensor replacement: free workshop manuals
    Unscrew the oxygen sensor fastener. Use a 22-mm oxygen sensor socket. Use a ratchet wrench.
  4. Step 6
    Changing Lambda Sensor on PEUGEOT EXPERT Platform/Chassis 2.0 HDi 165 2010 by yourself
    Remove the oxygen sensor.
  5. Step 7
    How to remove PEUGEOT EXPERT 2.0 HDi 140 2011 Lambda Sensor - online easy-to-follow instructions
    Clean the oxygen sensor mounting seat. Use WD-40 spray.
  6. Step 8
    How to replace Lambda Sensor on PEUGEOT EXPERT Platform/Chassis 2012: download PDF manuals and video instructions
    Cut the thread for the new oxygen sensor. Use a thread tap. Use a ratchet wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the PEUGEOT Expert II Platform/Chassis model.

PEUGEOT EXPERT Platform/Chassis tyre size

Popular maintenance tutorials for PEUGEOT EXPERT Platform/Chassis

More manuals for PEUGEOT EXPERT Platform/Chassis

Complete guides for changing the Oxygen sensor on different PEUGEOT EXPERT models

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
PEUGEOT EXPERT Platform/Chassis Lambda Sensor replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY PEUGEOT EXPERT Platform/Chassis Lambda Sensor replacement - online guide
Tips & tricks for your PEUGEOT EXPERT Platform/Chassis
View more
  • How to change Oxygen sensor on PEUGEOT EXPERT Platform/Chassis 2.0 HDi 130 - replacement tricks
    DIY valve cover restoration | AUTODOC tips
    6K views
    Published on: 29/06/2023
  • Changing O2 sensor PEUGEOT EXPERT Platform/Chassis 2.0 HDi 120 - Replacement Tips
    How to easily repair a punctured tyre | AUTODOC tips
    3K views
    Published on: 25/02/2021
  • Maintenance Hacks - PEUGEOT EXPERT Platform/Chassis 1.6 HDi 90 16V NOx sensor replacement guide
    Things you should never do with an automatic transmission | AUTODOC tips
    6K views
    Published on: 26/01/2021
  • Replace Lambda sensors on PEUGEOT EXPERT Platform/Chassis - free video tips
    Things you should never do with your manual transmission | AUTODOC tips
    6K views
    Published on: 20/10/2020

Most commonly replaced car parts on PEUGEOT EXPERT

Professional manuals for the most common PEUGEOT models