When to replace the Lambda Sensor on your OPEL COMBO
Recommended replacement interval for the part category Lambda sensor : 100000 km
Important!
This replacement procedure can be used for:
OPEL COMBO Tour 1.6, OPEL COMBO Tour 1.6 CNG View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Lambda Sensor for COMBO Tour and other OPEL models
Tools
Replacement: lambda sensor – OPEL COMBO Tour. Tools you'll need:
Wire brush
WD-40 spray
Electronic spray
High-temperature ceramic grease
Torque wrench
Flare nut wrench #22
Drive socket # 22
Ratchet wrench
Thread tap
Fender cover
Replacement: lambda sensor – OPEL COMBO Tour. AUTODOC recommends:
  • After replacing the oxygen sensor, clear the trouble code from the electronic control unit and let the ECU adapt itself to the new sensor.
  • Before getting down to work, start the engine and let it warm up to operating temperature.
  • Please note: all work on the car – OPEL COMBO Tour – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    Lift the car using a jack or place it over an inspection pit.
    Step 4
    How to change Lambda Sensor on Opel Combo C Tour 2001 - free PDF and video manuals
    Detach the oxygen sensor connector.
  2. Step 5
    How to replace OPEL COMBO Tour 1.7 CDTI 16V 2002 Lambda Sensor - step-by-step manuals and video guides
    Clean the oxygen sensor fastener. Use a wire brush. Use WD-40 spray.
  3. Step 6
    Opel Combo C Tour 1.3 CDTI 16V 2003 Lambda Sensor replacement: free workshop manuals
    Unscrew the oxygen sensor fastener. Use a flare nut spanner #22.
  4. Step 7
    Changing Lambda Sensor on OPEL COMBO Tour 1.7 DTI 16V 2004 by yourself
    Remove the oxygen sensor.
  5. Step 8
    How to remove OPEL COMBO 1.6 2005 Lambda Sensor - online easy-to-follow instructions
    Cut the thread for the new oxygen sensor. Use a thread tap. Use a ratchet wrench.
  6. Step 9
    How to replace Lambda Sensor on OPEL COMBO Tour 2006: download PDF manuals and video instructions
    Treat the oxygen sensor. Use high-temperature ceramic grease.
  7. Step 10
    How hard is it to do yourself: Lambda Sensor replacement on Opel Combo C Tour 1.7 DI 16V 2007 - download illustrated guide
    Install the new oxygen sensor.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the OPEL Combo C Tour model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
OPEL COMBO Tour Lambda Sensor replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY OPEL COMBO Tour Lambda Sensor replacement - online guide
Tips & tricks for your OPEL COMBO Tour
View more
  • How to change Oxygen sensor on OPEL COMBO Tour 1.4 - replacement tricks
    How to remove rust | AUTODOC tips
  • Changing O2 sensor Opel Combo C Tour 1.7 CDTI 16V - Replacement Tips
    How to replace a wheel stud | AUTODOC tips
  • Maintenance Hacks - OPEL COMBO Tour 1.3 CDTI 16V NOx sensor replacement guide
    Top 5 mistakes when buying car parts
  • Replace Lambda sensors on Opel Combo C Tour - free video tips
    The most common problems when buying a used car | AUTODOC

Professional manuals for the most common OPEL models