When to replace the Lambda Sensor on your OPEL ADAM
Recommended replacement interval for the part category Lambda sensor : 100000 km
Important!
This replacement procedure can be used for:
OPEL Adam (M13) 1.4, OPEL Adam (M13) 1.4, OPEL Adam (M13) 1.2, OPEL Adam (M13) 1.4 LPG View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Lambda Sensor for Adam (M13) and other OPEL models
Alternative products
How to change Lambda sensor on Opel Adam M13 1.4 – step-by-step instructions for straightforward car repair Lambda sensor
Tools
Replacement: lambda sensor – OPEL ADAM. List of the tools you'll need:
Wire brush
WD-40 spray
Electronic spray
High-temperature ceramic grease
Torque wrench
Combination spanner #22
Flare nut wrench #22
Ratchet wrench
Thread tap
Fender cover
Replacement: lambda sensor – OPEL ADAM. AUTODOC experts recommend:
  • After replacing the oxygen sensor, clear the trouble code from the electronic control unit and let the ECU adapt itself to the new sensor.
  • Before getting down to work, start the engine and let it warm up to operating temperature.
  • Please note: all work on the car – OPEL ADAM – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Open the hood.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    Lift the car using a jack or place it over an inspection pit.
    Step 4
    How to change Lambda Sensor on Opel Adam M13 2012 - free PDF and video manuals
    Clean the oxygen sensor fastener. Use a wire brush. Use WD-40 spray.
  2. Step 5
    How to replace OPEL Adam (M13) 1.4 2013 Lambda Sensor - step-by-step manuals and video guides
    Detach the oxygen sensor connector.
  3. Step 6
    Opel Adam M13 1.2 2014 Lambda Sensor replacement: free workshop manuals
    Unscrew the oxygen sensor fastener. Use a flare nut spanner #22.
  4. Step 7
    Changing Lambda Sensor on OPEL Adam (M13) 1.4 LPG 2015 by yourself
    Remove the oxygen sensor.
  5. Step 8
    How to remove OPEL ADAM 1.0 2016 Lambda Sensor - online easy-to-follow instructions
    Cut the thread for the new oxygen sensor. Use a thread tap. Use a ratchet wrench.
  6. Step 9
    Treat the oxygen sensor. Use high-temperature ceramic grease.
    Step 10
    How to replace Lambda Sensor on OPEL Adam (M13) 2017: download PDF manuals and video instructions
    Install the new oxygen sensor.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the OPEL Adam (M13) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY OPEL Adam (M13) Lambda Sensor replacement - online guide
Tips & tricks for your OPEL Adam (M13)
View more
  • How to change Oxygen sensor on OPEL Adam (M13) 1.4 S - replacement tricks
    Revive Your Vehicle's Look | How to Restore Wheel Rims Yourself!
  • Changing O2 sensor Opel Adam M13 1.4 - Replacement Tips
    Why does it burn oil? The main cause of oil consumption in EA888 Gen 1
  • Maintenance Hacks - OPEL Adam (M13) 1.2 NOx sensor replacement guide
    How to Fix a Squealing Belt: Causes & Solutions | AUTODOC Expert Tips
  • Replace Lambda sensors on Opel Adam M13 - free video tips
    Coolant comparison test | AUTODOC

Professional manuals for the most common OPEL models

Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
OPEL Adam (M13) Lambda Sensor replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME