When to replace the Lambda Sensor on your DS DS 3
Recommended replacement interval for the part category Lambda sensor : 100000 km
Important!
This replacement procedure can be used for:
DS DS 3 1.6 Vti (SA5FS9, SA5FS0), DS DS 3 1.6 THP 208 (SA5GRM) View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Lambda Sensor for DS 3 and other DS models
Alternative products
How to change Lambda sensor on DS DS 3 1.6 BlueHDi 100 (SABHY0, SABHYT) – step-by-step instructions for straightforward car repair Lambda sensor
Tools
Replacement: lambda sensor – DS DS 3. Tools you might need:
Wire brush
WD-40 spray
Electronic spray
Copper grease
Torque wrench
Combination spanner #22
22-mm oxygen sensor socket
Ratchet wrench
Thread tap
Fender cover
Replacement: lambda sensor – DS DS 3. AUTODOC experts recommend:
  • After replacing the oxygen sensor, clear the trouble code from the electronic control unit and let the ECU adapt itself to the new sensor.
  • Before getting down to work, start the engine and let it warm up to operating temperature.
  • Please note: all work on the car – DS DS 3 – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Lambda Sensor on DS DS 3 2015 - free PDF and video manuals
    Detach the oxygen sensor connector.
  2. Step 4
    How to replace DS DS 3 1.6 BlueHDi 100 (SABHY0, SABHYT) 2016 Lambda Sensor - step-by-step manuals and video guides
    Clean the oxygen sensor fastener. Use a wire brush. Use WD-40 spray.
  3. Step 5
    DS DS 3 1.2 THP 110 / PureTech 110 (SAHNPS, SAHNZ6, SAHNZT) 2017 Lambda Sensor replacement: free workshop manuals
    Unscrew the oxygen sensor fastener. Use a 22-mm oxygen sensor socket. Use a ratchet wrench.
  4. Step 6
    Changing Lambda Sensor on DS DS 3 1.6 BlueHDi 120 (SABHZM) 2018 by yourself
    Remove the oxygen sensor.
  5. Step 7
    How to remove DS DS 3 1.6 THP 208 (SA5GRM) 2019 Lambda Sensor - online easy-to-follow instructions
    Clean the oxygen sensor mounting seat. Use WD-40 spray.
  6. Step 8
    How to replace Lambda Sensor on DS DS 3 2020: download PDF manuals and video instructions
    Cut the thread for the new oxygen sensor. Use a thread tap. Use a ratchet wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the DS DS3 Hatchback model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY DS DS 3 Lambda Sensor replacement - online guide
Tips & tricks for your DS DS 3
View more
  • How to change Oxygen sensor on DS DS 3 1.2 VTi 82 (SAHMZ6) - replacement tricks
    DIY brake caliper restoration | AUTODOC tips
  • Changing O2 sensor DS DS 3 1.6 BlueHDi 100 (SABHY0, SABHYT) - Replacement Tips
    How to Make a DIY Foam Sprayer | AUTODOC tips
  • Maintenance Hacks - DS DS 3 1.2 THP 110 / PureTech 110 (SAHNPS, SAHNZ6, SAHNZT) NOx sensor replacement guide
    Motorcycle fuel tank restoration
  • Replace Lambda sensors on DS DS 3 - free video tips
    How to fix your car with AUTODOC CLUB

Professional manuals for the most common DS models

Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
DS DS 3 Lambda Sensor replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME