When to replace the Lambda Sensor on your DS DS 4
Recommended replacement interval for the part category Lambda sensor : 100000 km
Important!
This replacement procedure can be used for:
DS DS 4 / DS 4 CROSSBACK 1.6 THP 150, DS DS 4 / DS 4 CROSSBACK 1.6 THP 160, DS DS 4 / DS 4 CROSSBACK 1.6 VTi, DS DS 4 / DS 4 CROSSBACK 1.6 THP 210 View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Lambda Sensor for DS 4 / DS 4 CROSSBACK and other DS models
Alternative products
How to change Lambda sensor on DS DS 4 / DS 4 CROSSBACK 1.6 BlueHDi 120 – step-by-step instructions for straightforward car repair Lambda sensor
Tools
Replacement: lambda sensor – DS DS 4 / DS 4 CROSSBACK. Tools you might need:
Wire brush
WD-40 spray
Electronic spray
Copper grease
Torque wrench
Combination spanner #22
22-mm oxygen sensor socket
Ratchet wrench
Thread tap
Fender cover
Replacement: lambda sensor – DS DS 4 / DS 4 CROSSBACK. AUTODOC experts recommend:
  • After replacing the oxygen sensor, clear the trouble code from the electronic control unit and let the ECU adapt itself to the new sensor.
  • Before getting down to work, start the engine and let it warm up to operating temperature.
  • Please note: all work on the car – DS DS 4 / DS 4 CROSSBACK – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Lambda Sensor on DS DS 4 / DS 4 CROSSBACK 2015 - free PDF and video manuals
    Detach the oxygen sensor connector.
  2. Step 4
    How to replace DS DS 4 / DS 4 CROSSBACK 1.6 BlueHDi 120 2016 Lambda Sensor - step-by-step manuals and video guides
    Clean the oxygen sensor fastener. Use a wire brush. Use WD-40 spray.
  3. Step 5
    DS DS 4 / DS 4 CROSSBACK 2.0 BlueHDi 180 2017 Lambda Sensor replacement: free workshop manuals
    Unscrew the oxygen sensor fastener. Use a 22-mm oxygen sensor socket. Use a ratchet wrench.
  4. Step 6
    Changing Lambda Sensor on DS DS 4 / DS 4 CROSSBACK 1.6 BlueHDi 100 2018 by yourself
    Remove the oxygen sensor.
  5. Step 7
    How to remove DS DS 4 1.6 THP 165 2015 Lambda Sensor - online easy-to-follow instructions
    Clean the oxygen sensor mounting seat. Use WD-40 spray.
  6. Step 8
    How to replace Lambda Sensor on DS DS 4 / DS 4 CROSSBACK 2016: download PDF manuals and video instructions
    Cut the thread for the new oxygen sensor. Use a thread tap. Use a ratchet wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the DS DS4 / DS4 Crossback model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY DS DS 4 / DS 4 CROSSBACK Lambda Sensor replacement - online guide
Tips & tricks for your DS DS 4 / DS 4 CROSSBACK
View more
  • How to change Oxygen sensor on DS DS 4 / DS 4 CROSSBACK 1.2 THP 130 (NXHNYM) - replacement tricks
    Revive Your Vehicle's Look | How to Restore Wheel Rims Yourself!
  • Changing O2 sensor DS DS 4 / DS 4 CROSSBACK 1.6 BlueHDi 120 - Replacement Tips
    What to do if your check engine light is on | AUTODOC tips
  • Maintenance Hacks - DS DS 4 / DS 4 CROSSBACK 2.0 BlueHDi 180 NOx sensor replacement guide
    TOP 6 WD-40 lifehacks | AUTODOC tips
  • Replace Lambda sensors on DS DS 4 / DS 4 CROSSBACK - free video tips
    Extend your engine's life: Avoid these 3 damaging factors | AUTODOC tips

Professional manuals for the most common DS models

Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
DS DS 4 / DS 4 CROSSBACK Lambda Sensor replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME