How to carry out replacement: Ignition Leads 1.4 VW Polo Classic 6kv
Disclaimer
Change VW Polo Classic 6kv 1.9 SDI Ignition Leads yourself – manuals and video tutorials

How to change ignition leads on VW Polo III Classic (6V2) – replacement guide

downloads: 2
Views: 62
Download your free tutorial and fix VW Polo Classic (6V2) 1.4 16V problems yourself Download for free 2.02 MB Ignition Leads for VW Polo Classic 6kv Shop now
Leave a comment Open in a new tab
When to replace the Ignition Leads on your VW POLO
Recommended replacement interval for the part category Ignition Cable Kit : 60000 km
Important!
This replacement procedure can be used for:
VW Polo Classic (6V2) 75 1.6, VW Polo Classic (6V2) 60 1.4, VW Polo Classic (6V2) 54 1.4 … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Ignition Leads for Polo Classic (6V2) and other VW models
How to change Ignition Cable Kit on VW Polo Classic 6kv 1.4 – step-by-step instructions for straightforward car repair Ignition Cable Kit
How to change Ignition lead on VW Polo Classic 6kv 1.4 – step-by-step instructions for straightforward car repair Ignition lead
How to change Ignition Cable Kit on VW Polo Classic (6V2) 75 1.6 – tips for proper car maintenance
Ignition Cable Kit for VW Polo Classic (6V2) 75 1.6 Petrol (75 hp)
Simple DIY car repair steps – Replacing Ignition Cable Kit on VW Polo Classic (6V2) 60 1.4
Ignition Cable Kit for VW Polo Classic (6V2) 60 1.4 Petrol (60 hp)
Easy tricks to help you to replace Ignition Cable Kit on VW Polo Classic (6V2) 54 1.4
Ignition Cable Kit for VW Polo Classic (6V2) 54 1.4 Petrol (54 hp)
Tools
Replacement: ignition leads – VW POLO CLASSIC (6KV2). Tools you might need:
Long nose pliers
Flat screwdriver
Phillips Screwdriver
Microfibre towel
Fender cover
Buy tools
Replacement: ignition leads – VW POLO CLASSIC (6KV2). Tip from AUTODOC:
  • All work should be done with the engine stopped.
Replacement: ignition leads – VW POLO CLASSIC (6KV2). Recommended sequence of steps:
  1. Step 1
    Open the hood.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Ignition Leads on VW Polo Classic 6kv 1995 - free PDF and video manuals
    Unscrew the air filter housing fasteners. Use a Phillips screwdriver.
  2. Step 4
    How to replace VW Polo Classic (6V2) 1.4 1996 Ignition Leads - step-by-step manuals and video guides
    Remove the air filter housing.
  3. Step 5
    VW Polo Classic 6kv 1.6 1997 Ignition Leads replacement: free workshop manuals
    Cover the throttle body with a microfibre towel to prevent dust and dirt from getting into the system.
  4. Step 6
    Changing Ignition Leads on VW Polo Classic (6V2) 1.9 SDI 1998 by yourself
    Detach the spark plug wire bracket. Use a flat screwdriver.
  5. Step 7
    How to remove VW POLO 1.9 TDI 1999 Ignition Leads - online easy-to-follow instructions
    Make marks on the distributor cap to indicate the installation order of the spark plug wires.
  6. Step 8
    How to replace Ignition Leads on VW Polo Classic (6V2) 2000: download PDF manuals and video instructions
    Disconnect the spark plug wires from the distributor cap.
    Replacement: ignition leads – VW POLO CLASSIC (6KV2). Tip:
    Be careful to avoid damaging spark plug wires.
  7. Step 9
    How hard is it to do yourself: Ignition Leads replacement on VW Polo Classic 6kv 1.6 2001 - download illustrated guide
    Disconnect the spark plug wires from the spark plugs. Use long nose pliers.
    Replacement: ignition leads – VW POLO CLASSIC (6KV2). Tip from AUTODOC experts:
    Be careful to avoid damaging spark plug wires.
  8. Step 10
    Need to know how to renew Ignition Leads on VW POLO 2002? This free workshop manual will help you to do it yourself
    Disconnect the high voltage wire.
  9. Step 11
    Changing of Ignition Leads on VW Polo Classic 6kv 2003 won't be an issue if you follow this illustrated step-by-step guide
    Connect new spark plug wires to the distributor cap.
    Replacement: ignition leads – VW POLO CLASSIC (6KV2). AUTODOC recommends:
    Follow the installation sequence.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0

Popular maintenance tutorials for VW Polo Classic 6kv

More manuals for VW Polo Classic 6kv

Complete guides for changing the Plug leads on different VW POLO models

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
VW Polo Classic (6V2) Ignition Leads replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY VW Polo Classic (6V2) Ignition Leads replacement - online guide
Tips & tricks for your VW Polo Classic (6V2)
View more
  • How to change Plug leads on VW Polo Classic (6V2) 1.4 16V - replacement tricks
    How to polish an old engine valve cover to a shiny finish | AUTODOC Tips
    8K views
    Published on: 30/11/2023
  • Changing Spark plug leads VW Polo Classic 6kv 1.4 - Replacement Tips
    Replacing your engine cooling fan | AUTODOC tips
    2K views
    Published on: 15/11/2020
  • Maintenance Hacks - VW Polo Classic (6V2) 1.6 Spark plug wire replacement guide
    Car checks you need to carry out on your car after the winter | AUTODOC tips
    3K views
    Published on: 23/03/2023
  • Replace Ignition cable set on VW Polo Classic 6kv - free video tips
    DIY starter repair | AUTODOC tips
    39K views
    Published on: 31/08/2023

Most commonly replaced car parts on VW POLO

Professional manuals for the most common VW models