Important!
This replacement procedure can be used for:
OPEL Mokka / Mokka X (J13) 1.8 4x4 (_76), OPEL Mokka / Mokka X (J13) 1.8 (_76), OPEL Mokka / Mokka X (J13) 1.6 (_76) View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Ignition Coil for Mokka / Mokka X (J13) and other OPEL models
Tools
Replacement: ignition coil – OPEL MOKKA. Tools you need:
Electronic spray
Torque wrench
Torx bit T40
Ratchet wrench
Crow bar
Fender cover
Replacement: ignition coil – OPEL MOKKA. AUTODOC experts recommend:
  • The replacement procedure is the same for the ignition coils of all cylinders.
  • Please note: all work on the car – OPEL MOKKA – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Open the hood.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Ignition Coil on OPEL MOKKA 2012 - free PDF and video manuals
    Remove the engine cover.
    AUTODOC recommends:
    Replacement: ignition coil – OPEL MOKKA. Do not use excessive force when removing the part as this may damage it.
  2. Step 4
    How to replace OPEL Mokka / Mokka X (J13) 1.4 (_76) 2013 Ignition Coil - step-by-step manuals and video guides
    Detach the connector from the ignition coil.
  3. Step 5
    OPEL MOKKA 1.7 CDTI (_76) 2014 Ignition Coil replacement: free workshop manuals
    Unscrew the ignition coil bolts. Use Torx T40. Use a ratchet wrench.
  4. Step 6
    Pry up the ignition coil. Use a crowbar.
    Step 7
    Changing Ignition Coil on OPEL Mokka / Mokka X (J13) 1.4 4x4 (_76) 2015 by yourself
    Take out the ignition coil from the spark plug well.
  5. Step 8
    How to remove OPEL MOKKA 1.6 (_76) 2016 Ignition Coil - online easy-to-follow instructions
    Clean dirt, dust and debris from inside the spark plug wells.
  6. Step 9
    How to replace Ignition Coil on OPEL Mokka / Mokka X (J13) 2017: download PDF manuals and video instructions
    Install the new ignition coil to the spark plug well.
  7. Step 10
    How hard is it to do yourself: Ignition Coil replacement on OPEL MOKKA 1.4 LPG (_76) 2018 - download illustrated guide
    Tighten the ignition coil bolts. Use Torx T40. Use a torque wrench. Tighten it to 7 nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the OPEL Mokka / Mokka X (J13) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
OPEL Mokka / Mokka X (J13) Ignition Coil replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY OPEL Mokka / Mokka X (J13) Ignition Coil replacement - online guide
Tips & tricks for your OPEL Mokka / Mokka X (J13)
View more
  • How to change Coil pack on OPEL Mokka / Mokka X (J13) 1.6 CDTI (_76) - replacement tricks
    TOP 6 WD-40 lifehacks | AUTODOC tips
  • Changing Ignition coil pack OPEL MOKKA 1.4 (_76) - Replacement Tips
    How to prevent car windows from fogging up | AUTODOC tips
  • Maintenance Hacks - OPEL Mokka / Mokka X (J13) 1.7 CDTI (_76) Ignition coils replacement guide
    TOP 8 mistakes car owners make | AUTODOC tips
  • Replace Coil packs on OPEL MOKKA - free video tips
    What to do if the belt squeals | AUTODOC tips

Professional manuals for the most common OPEL models