Important!
This replacement procedure can be used for:
BMW 3 Coupe (E46) 330 Ci, BMW 3 Coupe (E46) 318 Ci, BMW 3 Coupe (E46) 316 Ci, BMW 3 Coupe (E46) M3 CSL, BMW 3 Coupe (E46) 318 Ci, BMW 3 Coupe (E46) 325 Ci, BMW 3 Coupe (E46) 320 Ci, BMW 3 Coupe (E46) 330 xi, BMW 3 Coupe (E46) M3 View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Ignition Coil for 3 Coupe (E46) and other BMW models
Tools
Replacement: ignition coil – BMW 3 Coupe (E46). Tools you might need:
Electronic spray
High-temperature anti-seize lubricant
HEX bit no.H5.
Drive socket # 8
Ratchet wrench
Flat Screwdriver
Fender cover
Replacement: ignition coil – BMW 3 Coupe (E46). AUTODOC recommends:
  • The replacement procedure is the same for the ignition coils of all cylinders.
  • All work should be done with the engine stopped.
Replacement: ignition coil – BMW 3 Coupe (E46). Take the following steps:
  1. Step 1
    Open the hood.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Ignition Coil on E46 Coupe 1999 - free PDF and video manuals
    Unscrew the fasteners of the cabin filter housing cover. Use a drive socket #8. Use a ratchet wrench.
  2. Step 4
    How to replace BMW 3 Coupe (E46) 330 Ci 2000 Ignition Coil - step-by-step manuals and video guides
    Remove the cabin filter housing cover.
    AUTODOC recommends:
    Replacement: ignition coil – BMW 3 Coupe (E46). Do not use excessive force when removing the part as this may damage it.
  3. Step 5
    E46 Coupe 320Ci 2.2 2001 Ignition Coil replacement: free workshop manuals
    Remove the wiper arm covers.
  4. Step 6
    Changing Ignition Coil on BMW 3 Coupe (E46) 323Ci 2.5 2002 by yourself
    Detach the connectors from the climate control sensors.
  5. Step 7
    Remove the climate control sensors.
    Step 8
    How to remove BMW 3 SERIES 325 Ci 2003 Ignition Coil - online easy-to-follow instructions
    Unscrew the fasteners of the lower part of the scuttle panel. Use a drive socket #8. Use a ratchet wrench.
  6. Step 9
    How to replace Ignition Coil on BMW 3 Coupe (E46) 2004: download PDF manuals and video instructions
    Detach the cable duct from the upper part of the microfilter housing. Use a flat screwdriver.
  7. Step 10
    How hard is it to do yourself: Ignition Coil replacement on E46 Coupe 328 Ci 2005 - download illustrated guide
    Remove the lower part of the scuttle panel.
  8. Step 11
    Need to know how to renew Ignition Coil on BMW 3 SERIES 2006? This free workshop manual will help you to do it yourself
    Unscrew the engine cover fastener. Use HEX No.H5. Use a ratchet wrench.
  9. Step 12
    Changing of Ignition Coil on E46 Coupe 1999 won't be an issue if you follow this illustrated step-by-step guide
    Remove the engine cover.
    Replacement: ignition coil – BMW 3 Coupe (E46). Tip:
    Do not apply excessive force when removing the part. Otherwise you may damage it.
  10. Step 13
    BMW 3 SERIES M3 Ignition Coil replacement: online guides and video tutorials
    Detach the connector from the ignition coil.
  11. Step 14
    Replacing Ignition Coil on E46 Coupe 2001 330 Ci by yourself
    Treat the ignition coil connector with electronic spray. The spray will protect the electrical contacts from corrosion, oxidation, and will reduce the contact resistance.
  12. Step 15
    3 Coupe (E46) 325 Ci 2002 Ignition Coil DIY replacement workshop manual
    Take out the ignition coil from the spark plug well.
  13. Step 16
    How to change Ignition Coil on BMW 3 Coupe (E46) 2003 - tips and tricks
    Treat the ignition coil tips. Use high-temperature grease. Use a flat screwdriver.
  14. Step 17
    Step-by-step recommendations for DIY replacement E46 Coupe 2004 325 Ci Ignition Coil
    Install the new ignition coil to the spark plug well. Make sure you hear a click indicating that it is locked in place.
  15. Step 18
    DIY replacement of Ignition Coil on BMW 3 Coupe (E46) 330Cd 3.0 2005 is not an issue anymore with our step-by-step tutorial
    Plug in the ignition coil connector.
  16. Step 19
    How to change Ignition Coil on E46 Coupe 1999 - free PDF and video manuals
    Install the engine cover and secure it.
    Replacement: ignition coil – BMW 3 Coupe (E46). AUTODOC experts recommend:
    Make sure the engine cover is properly seated. It should not be displaced with respect to the guiding fasteners.Do not apply excessive force when installing the part. Otherwise you may damage the fasteners.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the BMW 3 Coupe (E46) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
BMW 3 Coupe (E46) Ignition Coil replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY BMW 3 Coupe (E46) Ignition Coil replacement - online guide
Tips & tricks for your BMW 3 Coupe (E46)
View more
  • How to change Coil pack on BMW 3 Coupe (E46) 330Cd 3.0 - replacement tricks
    5 tools that make car repair incredibly simple | AUTODOC tips
  • Changing Ignition coil pack E46 Coupe 330 Ci - Replacement Tips
    TOP 5 mistakes when replacing shock absorbers | AUTODOC tips
  • Maintenance Hacks - BMW 3 Coupe (E46) 320Ci 2.2 Ignition coils replacement guide
    Coolant comparison test | AUTODOC
  • Replace Coil packs on E46 Coupe - free video tips
    5 car interior cleaning mistakes | AUTODOC tips