Important!
This replacement procedure can be used for:
BMW 1 Hatchback (E81) 130 i, BMW 1 Hatchback (E81) 116 i, BMW 1 Hatchback (E81) 120 i, BMW 1 Hatchback (E81) 118 i, BMW 1 Hatchback (E81) 130 i, BMW 1 Hatchback (E81) 116 i View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

Tools
Replacement: ignition coil – BMW 1 (E81). Tools you might need:
Electronic spray
High-temperature anti-seize lubricant
HEX bit no.H5.
Drive socket # 8
Ratchet wrench
Flat Screwdriver
Fender cover
Replacement: ignition coil – BMW 1 (E81). AUTODOC recommends:
  • The replacement procedure is the same for the ignition coils of all cylinders.
  • All work should be done with the engine stopped.
Replacement: ignition coil – BMW 1 (E81). Take the following steps:
  1. Step 1
    Open the hood.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Ignition Coil on BMW E81 2006 - free PDF and video manuals
    Unscrew the fasteners of the cabin filter housing cover. Use a drive socket #8. Use a ratchet wrench.
  2. Step 4
    How to replace BMW 1 Hatchback (E81) 118d 2.0 2007 Ignition Coil - step-by-step manuals and video guides
    Remove the cabin filter housing cover.
    AUTODOC recommends:
    Replacement: ignition coil – BMW 1 (E81). Do not use excessive force when removing the part as this may damage it.
  3. Step 5
    BMW E81 120 d 2008 Ignition Coil replacement: free workshop manuals
    Remove the wiper arm covers.
  4. Step 6
    Changing Ignition Coil on BMW 1 Hatchback (E81) 116 i 2009 by yourself
    Detach the connectors from the climate control sensors.
  5. Step 7
    Remove the climate control sensors.
    Step 8
    How to remove BMW 1 SERIES 118i 2.0 2010 Ignition Coil - online easy-to-follow instructions
    Unscrew the fasteners of the lower part of the scuttle panel. Use a drive socket #8. Use a ratchet wrench.
  6. Step 9
    How to replace Ignition Coil on BMW 1 Hatchback (E81) 2011: download PDF manuals and video instructions
    Detach the cable duct from the upper part of the microfilter housing. Use a flat screwdriver.
  7. Step 10
    How hard is it to do yourself: Ignition Coil replacement on BMW E81 116i 2.0 2006 - download illustrated guide
    Remove the lower part of the scuttle panel.
  8. Step 11
    Need to know how to renew Ignition Coil on BMW 1 SERIES 2007? This free workshop manual will help you to do it yourself
    Unscrew the engine cover fastener. Use HEX No.H5. Use a ratchet wrench.
  9. Step 12
    Changing of Ignition Coil on BMW E81 2008 won't be an issue if you follow this illustrated step-by-step guide
    Remove the engine cover.
    Replacement: ignition coil – BMW 1 (E81). Tip:
    Do not apply excessive force when removing the part. Otherwise you may damage it.
  10. Step 13
    BMW 1 SERIES 118d 2.0 Ignition Coil replacement: online guides and video tutorials
    Detach the connector from the ignition coil.
  11. Step 14
    Replacing Ignition Coil on BMW E81 2010 118d 2.0 by yourself
    Treat the ignition coil connector with electronic spray. The spray will protect the electrical contacts from corrosion, oxidation, and will reduce the contact resistance.
  12. Step 15
    1 Hatchback (E81) 118i 2.0 2011 Ignition Coil DIY replacement workshop manual
    Take out the ignition coil from the spark plug well.
  13. Step 16
    How to change Ignition Coil on BMW 1 Hatchback (E81) 2006 - tips and tricks
    Treat the ignition coil tips. Use high-temperature grease. Use a flat screwdriver.
  14. Step 17
    Step-by-step recommendations for DIY replacement BMW E81 2007 118i 2.0 Ignition Coil
    Install the new ignition coil to the spark plug well. Make sure you hear a click indicating that it is locked in place.
  15. Step 18
    DIY replacement of Ignition Coil on BMW 1 Hatchback (E81) 116d 2.0 2008 is not an issue anymore with our step-by-step tutorial
    Plug in the ignition coil connector.
  16. Step 19
    How to change Ignition Coil on BMW E81 2006 - free PDF and video manuals
    Install the engine cover and secure it.
    Replacement: ignition coil – BMW 1 (E81). AUTODOC experts recommend:
    Make sure the engine cover is properly seated. It should not be displaced with respect to the guiding fasteners.Do not apply excessive force when installing the part. Otherwise you may damage the fasteners.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the BMW 1 Hatchback (E81) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
BMW 1 Hatchback (E81) Ignition Coil replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY BMW 1 Hatchback (E81) Ignition Coil replacement - online guide
Tips & tricks for your BMW 1 Hatchback (E81)
View more
  • How to change Coil pack on BMW 1 Hatchback (E81) 116d 2.0 - replacement tricks
    What to do if your car heater isn't working | AUTODOC tips
  • Changing Ignition coil pack BMW E81 118d 2.0 - Replacement Tips
    How to repair a chipped or cracked windscreen | AUTODOC tips
  • Maintenance Hacks - BMW 1 Hatchback (E81) 120 d Ignition coils replacement guide
    DIY valve cover restoration | AUTODOC tips
  • Replace Coil packs on BMW E81 - free video tips
    Headlight Restoration | AUTODOC tips