Disclaimer
How to change headlight bulb on MERCEDES-BENZ 100 Platform/Chassis (631) – replacement guide
downloads:
1
Views:
95
Recommended replacement interval for the part category Headlight bulb : 12 month / 15000 km
Important!
This replacement procedure can be used for:
MERCEDES-BENZ 100 Platform/Chassis (631) D (631.340) … View more
The steps may slightly vary depending on the car design.
MERCEDES-BENZ 100 Platform/Chassis (631) D (631.340) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Headlight Bulb for 100 Platform/Chassis (631) and other MERCEDES-BENZ models
Alternative products

Dielectric grease
Fender cover
Replacement: headlight bulbs – MERCEDES-BENZ 100 Platform/Chassis (631). Professionals recommend:
- All work should be done with the engine stopped.
Replacement: headlight bulbs – MERCEDES-BENZ 100 Platform/Chassis (631). Take the following steps:
- Step 1Open the bonnet.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3
Remove the headlight rear cover.Please note!The replacement procedure is identical for the left and right headlight bulbs. - Step 4
Detach the fog light connector. - Step 5
Pull aside the retainer of the fog light bulb. - Step 6
Remove the fog light bulb. - Step 7
Detach the connector of the low and high beam bulb. - Step 8
Pull aside the retainer of the low and high beam bulb. - Step 9
Remove the low and high beam bulb. - Step 10
Detach the turn signal light bulb holder by turning it approx. 30°. - Step 11
Remove the turn signal light bulb. - Step 12
Treat the bulb connectors. Use dielectric grease. - Step 13
Install a new turn signal light bulb in the socket. - Step 14
Install the turn signal light bulb holder by turning it approx. 30°. - Step 15
Install a new low and high beam bulb.Replacement: headlight bulbs – MERCEDES-BENZ 100 Platform/Chassis (631). AUTODOC recommends:Avoid touching the bulb glass. The finger marks left on it may cause failure. - Step 16
Fit the retainer of the low and high beam bulb. - Step 17
Attach the connector of the low and high beam bulb. - Step 18
Install a new fog light bulb.AUTODOC recommends:Avoid touching the bulb glass. The finger marks left on it may cause failure. - Step 19
Fit the retainer of the fog light bulb.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the MERCEDES-BENZ MB 100 Platform/Chassis (W631) model
Popular maintenance tutorials for Mercedes MB 100 Platform
Complete guides for changing the Headlight bulbs on different MERCEDES-BENZ MB 100 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your MERCEDES-BENZ 100 Platform/Chassis (631)
View more
5 easy car repairs you can do without a garage visit
3 essential tips for choosing summer tyres | Get ready for warmer weather
5 reasons why your car is making a knocking sound
Which Coolant is Best? Comparison Test | AUTODOC
Most commonly replaced car parts on MERCEDES-BENZ MB 100
Time to replace parts? Get even better deals in our Shop app.

SCAN ME





























