Disclaimer
How to change glow plugs on RENAULT LAGUNA III Grandtour (KT0/1) – replacement guide
downloads:
4
Views:
225
Recommended replacement interval for the part category Glow plug : 30000 km
Important!
This replacement procedure can be used for:
RENAULT LAGUNA III Grandtour (KT0/1) 1.5 dCi (KT0A, KT0R, KT02) … View more
The steps may slightly vary depending on the car design.
RENAULT LAGUNA III Grandtour (KT0/1) 1.5 dCi (KT0A, KT0R, KT02) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Glow Plugs for LAGUNA III Grandtour (KT0/1) and other RENAULT models
Alternative products

Injector & glow plug grease
Torque wrench
Drive socket # 10
Spark plug socket # 10
Ratchet wrench
Flat Screwdriver
Combination pliers
Crow bar
Microfibre towel
Fender cover
Replacement: glow plugs – RENAULT LAGUNA III Grandtour (KT0/1). AUTODOC recommends:
- The replacement procedure is identical for all glow plugs.
- Before getting down to work, start the engine and let it warm up to operating temperature.
- Wear gloves to protect your hands from hot surfaces.
- All work should be done with the engine stopped.
Carry out replacement in the following order:
- Step 1Open the bonnet.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3
Disconnect the air intake pipe fastening. Use a drive socket #10. Use a ratchet wrench. - Step 4
Detach the air intake hose clamp. Use combination pliers. Use a crowbar. - Step 5
Remove the air intake pipe. - Step 6
Cover the air intake hose with a microfibre towel to prevent dust and dirt from getting into the system. - Step 7
Detach the engine wiring harness. Use a flat screwdriver. - Step 8
Unscrew the engine cover fastener. Use a drive socket #10. Use a ratchet wrench. - Step 9
Remove the engine cover.Replacement: glow plugs – RENAULT LAGUNA III Grandtour (KT0/1). Tip from AUTODOC experts:Do not apply excessive force when removing the part. Otherwise you may damage it. - Step 10
Clean dirt, dust and debris from inside the spark plug wells. - Step 11
Detach the glow plug wiring connectors. - Step 12
Unscrew the glow plugs. Use the spark plug socket #10. Use a ratchet wrench. - Step 13
Remove the glow plugs. - Step 14
Treat the glow plugs. Use the injector & glow plug grease.Please note!Do not touch the heating element as fingerprints may cause malfunction. - Step 15
Install new glow plugs to their mounting seats. - Step 16
Tighten the glow plugs. Use the spark plug socket #10. Use a torque wrench. Tighten it to 15 nm torque.Replacement: glow plugs – RENAULT LAGUNA III Grandtour (KT0/1). Tip from AUTODOC:Don't tighten the plugs with excessive force. Exceeding tightening torque can damage the thread connection. Be careful when working with a spark plug wrench. Its skewing can cause damage to the threaded connection.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the RENAULT Laguna III Sport Tourer (KT) model
Popular maintenance tutorials for Renault Laguna 3 Sport Tourer
Complete guides for changing the Glow plug on different RENAULT LAGUNA models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your RENAULT LAGUNA III Grandtour (KT0/1)
View more
Revive Your Vehicle's Look | How to Restore Wheel Rims Yourself!
Top 5 brake repair mistakes | AUTODOC tips
CHECK ENGINE light turned on – step-by-step guide on what to do
Top 5 Mistakes to Avoid for Safe Engine Bay Repairs | AUTODOC Tips
Most commonly replaced car parts on RENAULT LAGUNA
Time to replace parts? Get even better deals in our Shop app.

SCAN ME




























