Disclaimer
How to change glow plugs on PEUGEOT 309 II Hatchback – replacement guide
downloads:
0
Views:
5
Recommended replacement interval for the part category Glow plug : 30000 km
Important!
This replacement procedure can be used for:
PEUGEOT 309 II (3C, 3A) 1.8 D, PEUGEOT 309 II (3C, 3A) 1.9 D, PEUGEOT 309 II (3C, 3A) 1.8 Diesel, PEUGEOT 309 II (3C, 3A) 1.8 TD, PEUGEOT 309 II (3C, 3A) 1.9 Diesel … View more
The steps may slightly vary depending on the car design.
PEUGEOT 309 II (3C, 3A) 1.8 D, PEUGEOT 309 II (3C, 3A) 1.9 D, PEUGEOT 309 II (3C, 3A) 1.8 Diesel, PEUGEOT 309 II (3C, 3A) 1.8 TD, PEUGEOT 309 II (3C, 3A) 1.9 Diesel … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Glow Plugs for 309 II (3C, 3A) and other PEUGEOT models
Alternative products

High-temperature ceramic grease
Torque wrench
Combination spanner #10
Drive socket # 7
Drive socket # 8
Spark plug socket # 12
Ratchet wrench
Telescoping magnet
Long nose pliers
Microfibre towel
Fender cover
Replacement: glow plugs – PEUGEOT 309 II (3C, 3A). AUTODOC experts recommend:
- The replacement procedure is identical for all glow plugs.
- Please note: all work on the car – PEUGEOT 309 II (3C, 3A) – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3Before getting down to work, start the engine and let it warm up to operating temperature.Step 4Shut off the engine.Step 5
Unscrew the negative battery terminal fastener. Use a combination spanner #10. - Step 6
Disconnect the earth cable terminal from the battery. - Step 7
Loosen the air hose clamps. Use a drive socket #7. Use a ratchet wrench. - Step 8
Remove the air duct. - Step 9
Cover the intake manifold inlet with a towel. - Step 10
Unscrew the fasteners that connect the power cables to the glow plugs. Use a drive socket #8. Use a ratchet wrench. - Step 11
Remove the fastening nuts. Use a telescoping magnet. - Step 12
Remove the power cable. Use long nose pliers. - Step 13
Clean the glow plug mounting seats. - Step 14
Unscrew the glow plugs. Use the spark plug socket #12. Use a torque wrench.Replacement: glow plugs – PEUGEOT 309 II (3C, 3A). Tip from AUTODOC experts:The glow plugs can get stuck over time and break apart when removed.Use a torque wrench to loosen the parts to avoid exceeding the breakaway torque specified by the car manufacturer.If you have reached the breakaway torque but the glow plugs still won't unscrew, you need to consult a professional: breakage of the parts can result in costly engine repairs. - Step 15
Remove the glow plugs. Use long nose pliers. - Step 16
Treat the glow plugs. Use high-temperature ceramic grease. - Step 17
Install new glow plugs to their mounting seats. Use long nose pliers.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the PEUGEOT 309 II Hatchback model
Popular maintenance tutorials for Peugeot 309 2
Complete guides for changing the Glow plug on different PEUGEOT 309 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your PEUGEOT 309 II (3C, 3A)
View more
What to do if your check engine light is on | AUTODOC tips
TOP 6 WD-40 lifehacks | AUTODOC tips
The most common problems when buying a used car | AUTODOC
How to inspect and troubleshoot your car heater when it’s not working
Most commonly replaced car parts on PEUGEOT 309
Time to replace parts? Get even better deals in our Shop app.

SCAN ME



























