When to replace the Glow Plugs on your NISSAN INTERSTAR
Recommended replacement interval for the part category Glow plug : 30000 km
Important!
This replacement procedure can be used for:
NISSAN INTERSTAR Platform/Chassis dCi 150, NISSAN INTERSTAR Platform/Chassis dCi 120, NISSAN INTERSTAR Platform/Chassis dCi 115, NISSAN INTERSTAR Platform/Chassis dCi 100 View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Glow Plugs for INTERSTAR Platform/Chassis and other NISSAN models
Alternative products
How to change Glow plug on Interstar dCi 120 – step-by-step instructions for straightforward car repair Glow plug
Tools
Replacement: glow plugs – NISSAN INTERSTAR Platform/Chassis. Tools you'll need:
WD-40 spray
Electronic spray
Ceramic grease
Torque wrench
7 mm socket
10 mm socket
10 mm glow plug socket
Ratchet wrench
Glow plug pliers
Fender cover
Replacement: glow plugs – NISSAN INTERSTAR Platform/Chassis. AUTODOC experts recommend:
  • The replacement procedure is identical for all glow plugs.
  • All the work should be carried out with the ignition switched off.
Replacement: glow plugs – NISSAN INTERSTAR Platform/Chassis. Use the following procedure:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to avoid damaging the paintwork and plastic parts of the car.
    Step 3
    How to change Glow Plugs on Interstar 2003 - free PDF and video manuals
    Loosen the clamp that connects the air intake hose to the mass air flow sensor. Use a 7 mm socket. Use a ratchet wrench.
  2. Step 4
    How to replace NISSAN INTERSTAR Platform/Chassis dCi 120 2004 Glow Plugs - step-by-step manuals and video guides
    Detach the air intake hose from the MAF sensor.
    Replacement: glow plugs – NISSAN INTERSTAR Platform/Chassis. Professionals recommend:
    Protect the MAF sensor and other air intake system components from contaminants getting in.
  3. Step 5
    Interstar dCi 150 2005 Glow Plugs replacement: free workshop manuals
    Remove the air filter housing together with the air intake hose.
  4. Step 6
    Changing Glow Plugs on NISSAN INTERSTAR Platform/Chassis 2.5 dCi 100 2006 by yourself
    Unscrew the coolant expansion tank fastener. Use a 10 mm socket. Use a ratchet wrench.
  5. Step 7
    How to remove NISSAN INTERSTAR 3.0 dCi 140 2007 Glow Plugs - online easy-to-follow instructions
    Remove the fastening bolt.
  6. Step 8
    How to replace Glow Plugs on NISSAN INTERSTAR Platform/Chassis 2008: download PDF manuals and video instructions
    Remove the coolant expansion tank.
  7. Step 9
    How hard is it to do yourself: Glow Plugs replacement on Interstar dCi 150 2009 - download illustrated guide
    Detach the glow plug connectors.
  8. Step 10
    Need to know how to renew Glow Plugs on NISSAN INTERSTAR 2010? This free workshop manual will help you to do it yourself
    Clean the glow plug wells. Use WD-40 spray.
  9. Step 11
    Changing of Glow Plugs on Interstar 2011 won't be an issue if you follow this illustrated step-by-step guide
    Unscrew the glow plugs. Use a 10 mm glow plug socket. Use a torque wrench. Use a ratchet wrench.
    Replacement: glow plugs – NISSAN INTERSTAR Platform/Chassis. Tip from AUTODOC:
    Glow plugs can get stuck over time and break apart when removed.Before unscrewing the parts, use a torque wrench to loosen them to avoid exceeding the breakaway torque specified by the car manufacturer.If you have reached the breakaway torque but the glow plugs still will not loosen up, you need to seek professional help: a glow plug fragment left inside the well or damage to the thread of the mounting seat can result in costly engine repairs.
  10. Step 12
    NISSAN INTERSTAR 2.5 dCi 100 Glow Plugs replacement: online guides and video tutorials
    Remove the glow plugs. Use glow plug pliers.
  11. Step 13
    Replacing Glow Plugs on Interstar 2013 dCi 120 by yourself
    Treat the new glow plugs. Use ceramic grease.
  12. Step 14
    INTERSTAR Platform/Chassis 3.0 dCi 140 2014 Glow Plugs DIY replacement workshop manual
    Install the new glow plugs into their mounting seats. Use glow plug pliers. Use a ratchet wrench.
  13. Step 15
    How to change Glow Plugs on NISSAN INTERSTAR Platform/Chassis 2015 - tips and tricks
    Tighten the glow plugs. Use a 10 mm glow plug socket. Use a torque wrench. Tightening torque: 15 N·m.
    Replacement: glow plugs – NISSAN INTERSTAR Platform/Chassis. AUTODOC recommends:
    Don't use excessive force when tightening the glow plugs. Overtightening can damage the threaded connection. 
  14. Step 16
    Step-by-step recommendations for DIY replacement Interstar 2016 3.0 dCi 140 Glow Plugs
    Treat the glow plug connectors. Use an electronic spray.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the NISSAN Interstar Platform/Chassis model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY NISSAN INTERSTAR Platform/Chassis Glow Plugs replacement - online guide
Tips & tricks for your NISSAN INTERSTAR Platform/Chassis
View more
  • How to change Glow plug on NISSAN INTERSTAR Platform/Chassis dCi 115 - replacement tricks
    How to restore a steering wheel | AUTODOC tips
  • Changing Heater plugs Interstar dCi 120 - Replacement Tips
    Preventing Engine Failure: Head Gasket Inspection Tutorial | AUTODOC
  • Maintenance Hacks - NISSAN INTERSTAR Platform/Chassis dCi 150 Heater plug replacement guide
    How to easily repair a punctured tyre | AUTODOC tips
  • Replace Diesel glow plugs on Interstar - free video tips
    Drive with Care: 8 Common Bad Driving Habits Explained | AUTODOC
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
NISSAN INTERSTAR Platform/Chassis Glow Plugs replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME